Fedora :: Computer Display Suddenly Goes Black With No Response
Apr 9, 2011
This started happening about 1 hour ago. My computer display just went black, and the power light never changed state. I turned off it's power, and then back on (after a few seconds), and the power light came on "blue", which is what it's supposed to be, but i got nothing on the display, and hitting the menu buttons did not show a menu for the display, or any kind of response. i rebooted a couple of times, to no avail.
I thought my new display just crapped out, so i took it to another computer (windows xp laptop) and plugged in the vga cable (my server uses DVI), and it was fine. I took it to another computer (windows 7) with a DVI cable, and it was fine. I brought it back to my desktop/server, and plugged it back in, and it was fine again. Menu buttons and all.
Then, a few minutes later, it went out again. I turned the power for it off for a few minutes, then back on, and it came on with weird scanlines of various colors... then went back to black.
I played with unplugging the dvi cable in the back of the monitor/display, and wiggling it, and then at the computer connection, and at some point it came back on, for no obvious reason (i think i already stopped playing with it).
xorg.log was uneventful, but i can post it, if need be.
Dmesg shows this (the very last line of the NEXT post was the only one of any interest; but googling it returned no scenarious involving display crashes):
Code:
[ 15.615437] dracut: Switching root
[ 17.529852] udev[521]: starting version 161
[ 18.991277] ATK0110 ATK0110:00: EC enabled
[ 18.994541] EDAC MC: Ver: 2.1.0 Feb 7 2011
[ 19.044674] microcode: CPU0: patch_level=0x10000bf
[Code]....
View 1 Replies
ADVERTISEMENT
Feb 15, 2011
My notebook is using intel core 2 duo T6400 CPU and 2GB Ram, when I am playing MP3 with Amarok and at the same time running Firefox, the computer tends to hang and slow in response to open new website.IS it due to my hardware?
View 12 Replies
View Related
Sep 1, 2009
F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
View 2 Replies
View Related
Nov 3, 2010
So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
View 3 Replies
View Related
Mar 3, 2011
My computer won't shut off unless I just hold down the power button. Everytime I try System > Shut Off it just turns off, then restarts. My computer screen will sometimes just 'turn black' and become unresponsive, and I have to shut it down and restart. (The longest I waited was a few minutes with no response. How do I get customized mouse pointers? When I download something and 'extract' it, how do I know which file I'm supposed to open after I click 'show the files'? I've downloaded a few things and extracted them but I'm assuming I must do more, since they are not on my applications. Which is the best browser to use on Fedora? I love Opera, but for some reason my internet is twice as slow on Opera as it is on Firefox or Chrome?
View 4 Replies
View Related
Dec 19, 2009
Every other time my system comes out of hibernation, I see the blue Fedora screen loading like the computer is powering back on, and all of the sudden the screen goes blank, as if it shut itself back off. The funny thing is the power button is still on, but there is no display. Has anyone heard of this issue before. I'm not sure what to try to get it fixed
View 1 Replies
View Related
May 30, 2010
The last few days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message:
Ubuntu is running in low-graphics mode
There is some buttons that tells me I can do different things (like reconfiguration ) but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution. I have not found any way to reproduce this behavior. It has happened after being logged in for several days and sometimes just after boot and login when I'm starting an xterm and in all time intervals in between the output of:
sudo lshw -C display
PCI (sysfs)
*-display
description: VGA compatible controller
product: 82G33/G31 Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0 .....
View 6 Replies
View Related
Jun 3, 2010
Recently upgraded to 10.04 after countless problems w/ Karmic & already problems with Lucid! The screen sometimes suddenly goes black, then goes into low graphics mode, if I let it, thereby changing screen rez & unless I reboot, I am stuck in this mode. If I don't choose temporary low graphics mode, I must reboot. Many others seem to be experiencing the same problem yet have been offered no solution by the developers. So.
View 9 Replies
View Related
Jul 13, 2010
I just installed Ubuntu on my home desktop computer this morning, and I am having fun exploring this new alternative to Microsoft. I originally tried to install Kubuntu, but after multiple unsuccessful attempts I gave Ubuntu a try and it worked like a charm.
Here's what I did: First, I burned the installation CD. Then I booted from that CD and began the installation process. When the Kubuntu desktop came up, and the icons started to appear, the screen suddenly went black. After that it flashed back and forth between the partially loaded desktop and the black screen.
That's as far as I got.
[Code]...
View 11 Replies
View Related
Jan 9, 2010
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
View 1 Replies
View Related
Jul 19, 2011
when I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.
View 1 Replies
View Related
Jun 3, 2010
Can anybody tell me how to display the complete hardware information (hardware profile)
of my computer system? I use Gnome.
View 5 Replies
View Related
Feb 11, 2010
I am running openSUSE on Acer Aspire-One, 1.6/500MB/8GB and it runs perfectly fine on AC power but whenever I switch to Battery power (on 100% charged state) after sometime (3-5 minutes) the Display goes Black Dead while power light is still green and cpu fan still running and then i have to forcefully shut it down by press and holding power button and restart it.
This is really strange problem and i have fresh installed the openSUSE two times but same problem.
View 3 Replies
View Related
Feb 26, 2010
Has anyone seen or heard of the following problem? I have a 1in black border surrounding my display. I've been running google searches all day without much luck. My current setup is as follows: Ubuntu 9.10 (64-bit), 24in asus lcd, Radeon 5770, amd phenom 2 x4, ddr3 4gb, gigabyte mb. I noticed the border while running the live cd. I figured it had something to do with the video drivers. Last night I installed ATI's linux driver 10.2. I'm getting my preferred resolution of 1920x1080 over dvi. But i'm not able to use my full 24in. It's like using a 20in lcd.
View 6 Replies
View Related
Mar 21, 2010
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
View 1 Replies
View Related
Oct 7, 2010
I installed Ubuntu on a Toshiba Satellite about a month ago. It worked for about three hours. I installed Wine, and it still worked but the display would sometimes go black for a few seconds. Later that day I rebooted and that was it, no more Ubuntu. It goes through all of the process of booting but then the screen just goes black before I even get to the purple Ubuntu screen. I'm running this on a drive in an enclosure so I simply plugged the drive into another machine ( actually two other machines ), and it works perfectly. I have an old Vista drive that I put in the Toshiba and that works just fine, so it's not a pure hardware issue. Just to be sure I wiped the Ubuntu drive and re-installed, this time without installing wine. No Toshiba love. Just the black screen. I even made a flash drive with the loader and iso from the Ubuntu site. Same deal. It starts to boot from the flash and then just goes black where you would normally expect the purple Ubuntu screen. This thing is driving me nuts and I am at a point where I really need this machine working and will be faced with simply wiping the Ubuntu drive and installing Windows.
View 9 Replies
View Related
Oct 21, 2010
I'm new to ubuntu, and pretty new to windows as well. I'm not proud of it but before windows 7 I was using a mac. I have installed ubuntu 10.10 netbook i386 onto a flash drive, but when I go to boot my comp with it I get my initial boot screen, then the ubuntu screen, but then my display goes black.
I dont really know what comp specs to give...
4gb ram
Intel core 2 duo p8600 2.4ghz
NVIDIA GeForce GTX 260M
View 2 Replies
View Related
Nov 8, 2010
This little guide is for anyone with an HP Touchsmart Tm2 series running Ubuntu 10.04 and above. PLEASE NOTE: These workarounds, solutions, and tips have been tested and verified to work on an HP Touchsmart Tm2-2050us running Ubuntu 10.04 Lucid Lynx and Ubuntu 10.10 Maverick Meerkat. Installation: There are no problems I have experienced with installation except for the display not working on the live USB/CD images occasionally, this can be fixed by simply closing the display lid, and reopening it (this usually has to be done at least 2 or 3 times). Display: Most times after boot up, the display is black. A workaround for this is closing the lid and reopening it (repeat until the display works). Another reported solution is as follows:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/rc.local 3) Add this to the bottom of the file (this disables the ATI part of the hybrid graphics card):
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
4) Press CTRL-X (to exit), Y (to save changes), and ENTER/RETURN to accept the file name.
5) Reboot
Note: This solution is also reported to increase battery life.
Trackpad: It may seem that the right click button is disabled, but it isn't. To right click, you must tap the very bottom right corner of the trackpad. Also, by default the trackpad does not have multi-touch enabled (even though it is capable of it). A reported solution for this is:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/X11/xorg.conf.d/50-two-finger-scroll-touchsmart-tm2.conf
3) Add this to the bottom of the file:
Code:
Section "InputClass"
Identifier "enable synaptics SHMConfig"
MatchIsTouchpad "on"
[Code]...
View 8 Replies
View Related
Feb 7, 2011
I was trying to install my ubuntu into my laptop , at the beginning of the installation my display goes black , I searched and changed to nomodeset . I could Install it and after reboot my ubuntu didnt work again , black screenand next I did this :On the Grub Menu, I select "Ubuntu, with Linux 2.6.35-22-generic" and press "e" so I can edit the boot parameter.
On linux /boot/vmlinuz-2.6.35-22-generic root=UUID=3df857a3-9c1b-4fd3-b0fc-52838eaa2023 ro quiet splash I changed it tolinux /boot/vmlinuz-2.6.35-22-generic root=UUID=3df857a3-9c1b-4fd3-b0fc-52838eaa2023 ro nomodeset singleand press 'ctrl-x' and log in the startx .it worked but I couldnt save this setting so for every reboot I had to do all things above .after that I download and install the Nvidia driver for ubuntu , but after restarting it went to froze purple screen
View 7 Replies
View Related
Oct 4, 2010
I had my system running fine on Debian for about a month and a half. Then tonight the display suddenly went black. The system was still running, but my screen was black (though the monitor didn't indicate that it had lost signal). I restarted the computer; it booted through the BIOS and showed me my GRUB menu, but then the display went black again. Shorting the jumper pins to clear CMOS data didn't help; in fact, that made the display go black even sooner. Now, I see my motherboard's BIOS splash screen for a couple of seconds, and the display goes black. I know the system is still booting okay, because I hear the usually noises from the internal speaker. But I now have no visual output.
Could this be an issue with the motherboard or the video card? The board doesn't have onboard video, or else I'd try that. And I don't have any spare boards, video cards, or monitors available to me here. I did try using a D-sub cable instead of DVI-D (my monitor and video card support both), but that was no better. What can I do to try to fix this problem?
Motherboard: MSI 870A-G54
CPU: AMD Athlon II X2 250 (at 3.0 GHz, not overclocked)
Video card: Sapphire 100252HDMI Radeon HD 4550
Monitor: Asus VW195T
View 3 Replies
View Related
Jun 16, 2010
I install Bochs on Ubuntu10.04 with compile,there is noting errors.but when I running the linuximage(download from:Below is code:
root@IManewer-linux:/home/imanewer/Oranges/linux-img# ls
bochsout.txt bochsrc minibootable.img README TESTFORM.txt
root@IManewer-linux:/home/imanewer/Oranges/linux-img# bochs -f bochsrc
[code]...
View 1 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Nov 23, 2010
I'm using the wubi install for now and am trying to get that really cool ant light screensaver to work, but when my computer is idle enough, it just goes to black
View 1 Replies
View Related
May 14, 2010
I want make two simple changes in my display (energy management) & synaptics touchpad configuration:
1.Prevent the display from turning off (getting black) after 1 minute. Of course I checked the energy management configuration, but that has no effect at all.
2.Turn touchpad tapping off. I read Synaptics Touchpad - openSUSE, but the file /etc/X11/xorg.conf does not exist, but only /etc/X11/xorg.conf.install (or is it the same?). Also, there is no section with "driver synaptics" in it. Its content is
[Code]....
View 1 Replies
View Related
Jan 28, 2010
When i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?
View 4 Replies
View Related
Nov 30, 2010
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies
View Related
Feb 28, 2010
I could easily go to ms system monitor display by clicking on background of desktop and finding it through there to change settings related to desktop. I want to be able to watch a movie without the desktop screen saver thing going off. where can extend it to longer than 2-3 minutes on linux mint?
View 8 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Jun 25, 2010
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
View 4 Replies
View Related
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
View 2 Replies
View Related
