Ubuntu Multimedia :: Display Would Sometimes Go Black For A Few Seconds

Oct 7, 2010

I installed Ubuntu on a Toshiba Satellite about a month ago. It worked for about three hours. I installed Wine, and it still worked but the display would sometimes go black for a few seconds. Later that day I rebooted and that was it, no more Ubuntu. It goes through all of the process of booting but then the screen just goes black before I even get to the purple Ubuntu screen. I'm running this on a drive in an enclosure so I simply plugged the drive into another machine ( actually two other machines ), and it works perfectly. I have an old Vista drive that I put in the Toshiba and that works just fine, so it's not a pure hardware issue. Just to be sure I wiped the Ubuntu drive and re-installed, this time without installing wine. No Toshiba love. Just the black screen. I even made a flash drive with the loader and iso from the Ubuntu site. Same deal. It starts to boot from the flash and then just goes black where you would normally expect the purple Ubuntu screen. This thing is driving me nuts and I am at a point where I really need this machine working and will be faced with simply wiping the Ubuntu drive and installing Windows.

View 9 Replies


ADVERTISEMENT

Hardware :: Display Goes Black After A Couple Of Seconds?

Oct 4, 2010

I had my system running fine on Debian for about a month and a half. Then tonight the display suddenly went black. The system was still running, but my screen was black (though the monitor didn't indicate that it had lost signal). I restarted the computer; it booted through the BIOS and showed me my GRUB menu, but then the display went black again. Shorting the jumper pins to clear CMOS data didn't help; in fact, that made the display go black even sooner. Now, I see my motherboard's BIOS splash screen for a couple of seconds, and the display goes black. I know the system is still booting okay, because I hear the usually noises from the internal speaker. But I now have no visual output.

Could this be an issue with the motherboard or the video card? The board doesn't have onboard video, or else I'd try that. And I don't have any spare boards, video cards, or monitors available to me here. I did try using a D-sub cable instead of DVI-D (my monitor and video card support both), but that was no better. What can I do to try to fix this problem?

Motherboard: MSI 870A-G54
CPU: AMD Athlon II X2 250 (at 3.0 GHz, not overclocked)
Video card: Sapphire 100252HDMI Radeon HD 4550
Monitor: Asus VW195T

View 3 Replies View Related

Ubuntu Multimedia :: Ati Catalyst - Screen Goes Black For A Couple Of Seconds When Opening Avi (divx Or Mjpeg)

Feb 21, 2010

On a Karmic desktop with a Radeon 2600 hd video card, my screen goes black for a couple of seconds when opening an avi (divx or mjpeg).The video starts playing immediatly but I only see a black screen. Using Movie Player, its a black screen window, using vlc or gmplayer or mplayer ,the all screen goes black. It does not happen if I use the ati open source driver (but then flash full screen crashes...). I just installed the latest ati catalyst (10.2) and the problem remains.....

View 1 Replies View Related

Ubuntu Multimedia :: Video Capture - Captures Maybe 2 Seconds Of Movement Then Goes Black And / Or The Image Freezes

Mar 11, 2010

I have an Acer Aspire One Netbook, and I have the Ubuntu 9.10 Netbook Remix installed. I have tried using Cheese to capture video and it captures maybe 2 seconds of movement, then goes black and/or the image freezes. I can take photos just fine, but video capture seems to be impossible. Any help?

View 2 Replies View Related

Ubuntu Multimedia :: Display Goes Black With Vertical Lines Top Half Of Screen?

Sep 5, 2010

I don't seem to have an "xorg.conf" file.

Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.

I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)

EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288

View 9 Replies View Related

Fedora :: Way To Display Seconds On Clock Of GNOME Status Bar?

Jun 1, 2011

Is there a way to display the seconds on the clock of the GNOME status bar?

View 3 Replies View Related

Fedora :: Gnome-3 - How To Make The Time Display Seconds

Aug 2, 2011

Is there a way for the time at the top of the screen to display seconds as well as the date ?

My clock seems to be about :40 seconds off... before i upgraded from f-13 i had my time controlled by ntp(how to verify ntp is enabled) ? even with network time = yes, it seems to lag a little.

I figured out the network time. it is under a whole separate menu for some reason.

Is there a way to get weather/ temperature like in classic gnome ?

Rite now my clock reads: tue 3:50 pm...Is there a way i can make it read: tue, aug 20, 2011 3:50:45 pm

View 5 Replies View Related

OpenSUSE Install :: 11.2 Keeps Freezing - Getting Black Screen And After 30 Seconds The DVD Player Stops Running

Jan 17, 2010

I am trying to install 11.2 but it keeps freezing. I press install and the Linux kernal loads and afterwards I get a black screen and after 30 seconds the DVD player stops running. I have also tried to the online network install and the exact same thing happens. I also tried a DVD I have of 11.1 which I know is good since I have successfully installed it on other machines and the result is also the same. My computer currently has a dual boot of XP and Kubuntu 9.10.

I am returning to Suse after experimenting with Kubuntu but thought I would leave the Kubuntu on the machine (prefer Suse but Kubuntu installed very easily on my computer). Could the Kubuntu be causing this problem or is the difficulty something else? I have also tried the safe install and the other options to no success.

View 9 Replies View Related

Fedora X86/64bit :: KDE Application Launcher Takes About 8 Seconds To Display K Menu

Dec 28, 2009

I am running FC12 x86_64 with KDE 4.3.3 using an NVidia GeForce 9600 graphics card. I installed the drivers followings leigh's procedure and everything works fine -- apart from the fact that clicking the the "f" button to bring up the K menu takes between 8 and 10 seconds. Same thing happens if I select anything from the K desktop pop-up menu, like the Konsole or the run command for example. I disabled desktop effects but this had no impact.

View 1 Replies View Related

OpenSUSE Install :: 11.4 Startup Fails - WARNING: GdmDisplay: Display Lasted 1.088891 Seconds

Mar 11, 2011

Same problem with 11.4 x64 DVD version (gnome default). System ends with text before showing logon screen allso in failsafe

[code]...

View 6 Replies View Related

Ubuntu Installation :: Can't Run On Pc - "_" Blinking For A Few Seconds And Then Goes Black

May 5, 2011

I had burn an image of ubuntu 11.04 for AMD 64, but I have problem with running it on my PC, when. Whenever I trying to try ubuntu or installing it from the live cd, there is a "_" blinking for a few seconds and then goes black. I tried the disk on other computers it worked well. I tried to run ubuntu 6 and it worked. I have AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ MSI K9N6PGM-F (MS-7309) NVIDIA GeForce 8600 GT

View 4 Replies View Related

Fedora :: 13 - Screen Goes Black For A Few Seconds And Then Returns To The Login Screen

Mar 7, 2011

This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.

When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:

[Code]....

View 1 Replies View Related

Ubuntu :: "xset Dpms Force Off" Disables Display And Some Seconds Later It Gets Enabled?

Jan 1, 2010

The title pretty much describes the issue. The timespan is sometimes some minutes instead of some seconds. I've tried unplugging every peripherials and disabling the touchpad, killing every non-critical processes, disabling and enabling Compiz, but nothing has helped so far.

I'm running Karmic on an Acer Aspire 8935G-874G100BN laptop with a Radeon graphics chipset.

View 6 Replies View Related

Ubuntu :: Displaying 1in Black Border Within Display?

Feb 26, 2010

Has anyone seen or heard of the following problem? I have a 1in black border surrounding my display. I've been running google searches all day without much luck. My current setup is as follows: Ubuntu 9.10 (64-bit), 24in asus lcd, Radeon 5770, amd phenom 2 x4, ddr3 4gb, gigabyte mb. I noticed the border while running the live cd. I figured it had something to do with the video drivers. Last night I installed ATI's linux driver 10.2. I'm getting my preferred resolution of 1920x1080 over dvi. But i'm not able to use my full 24in. It's like using a 20in lcd.

View 6 Replies View Related

Ubuntu :: Display - Black Screen Instead Of Standby

Mar 21, 2010

Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.

I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.

It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.

View 1 Replies View Related

Ubuntu Installation :: 10.10 - Display Goes Black On Boot Up

Oct 21, 2010

I'm new to ubuntu, and pretty new to windows as well. I'm not proud of it but before windows 7 I was using a mac. I have installed ubuntu 10.10 netbook i386 onto a flash drive, but when I go to boot my comp with it I get my initial boot screen, then the ubuntu screen, but then my display goes black.

I dont really know what comp specs to give...
4gb ram
Intel core 2 duo p8600 2.4ghz
NVIDIA GeForce GTX 260M

View 2 Replies View Related

Ubuntu :: Most Times After Boot Up The Display Is Black?

Nov 8, 2010

This little guide is for anyone with an HP Touchsmart Tm2 series running Ubuntu 10.04 and above. PLEASE NOTE: These workarounds, solutions, and tips have been tested and verified to work on an HP Touchsmart Tm2-2050us running Ubuntu 10.04 Lucid Lynx and Ubuntu 10.10 Maverick Meerkat. Installation: There are no problems I have experienced with installation except for the display not working on the live USB/CD images occasionally, this can be fixed by simply closing the display lid, and reopening it (this usually has to be done at least 2 or 3 times). Display: Most times after boot up, the display is black. A workaround for this is closing the lid and reopening it (repeat until the display works). Another reported solution is as follows:

1) Open a terminal
2) Type:

Code:
sudo nano /etc/rc.local 3) Add this to the bottom of the file (this disables the ATI part of the hybrid graphics card):
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
4) Press CTRL-X (to exit), Y (to save changes), and ENTER/RETURN to accept the file name.
5) Reboot
Note: This solution is also reported to increase battery life.

Trackpad: It may seem that the right click button is disabled, but it isn't. To right click, you must tap the very bottom right corner of the trackpad. Also, by default the trackpad does not have multi-touch enabled (even though it is capable of it). A reported solution for this is:

1) Open a terminal
2) Type:

Code:
sudo nano /etc/X11/xorg.conf.d/50-two-finger-scroll-touchsmart-tm2.conf
3) Add this to the bottom of the file:
Code:
Section "InputClass"
Identifier "enable synaptics SHMConfig"
MatchIsTouchpad "on"

[Code]...

View 8 Replies View Related

Ubuntu :: At The Beginning Of The Installation My Display Goes Black?

Feb 7, 2011

I was trying to install my ubuntu into my laptop , at the beginning of the installation my display goes black , I searched and changed to nomodeset . I could Install it and after reboot my ubuntu didnt work again , black screenand next I did this :On the Grub Menu, I select "Ubuntu, with Linux 2.6.35-22-generic" and press "e" so I can edit the boot parameter.

On linux /boot/vmlinuz-2.6.35-22-generic root=UUID=3df857a3-9c1b-4fd3-b0fc-52838eaa2023 ro quiet splash I changed it tolinux /boot/vmlinuz-2.6.35-22-generic root=UUID=3df857a3-9c1b-4fd3-b0fc-52838eaa2023 ro nomodeset singleand press 'ctrl-x' and log in the startx .it worked but I couldnt save this setting so for every reboot I had to do all things above .after that I download and install the Nvidia driver for ubuntu , but after restarting it went to froze purple screen

View 7 Replies View Related

Ubuntu :: ATI Display Driver On Laptop - Screen Goes Black

Apr 19, 2010

Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).

View 2 Replies View Related

Ubuntu Installation :: Install To USB - Black Screen - Monitor Is On And Lit - Just Nothing On The Display

Nov 30, 2010

I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?

View 9 Replies View Related

OpenSUSE :: Display Does Black Dead While Power Is ON

Feb 11, 2010

I am running openSUSE on Acer Aspire-One, 1.6/500MB/8GB and it runs perfectly fine on AC power but whenever I switch to Battery power (on 100% charged state) after sometime (3-5 minutes) the Display goes Black Dead while power light is still green and cpu fan still running and then i have to forcefully shut it down by press and holding power button and restart it.

This is really strange problem and i have fresh installed the openSUSE two times but same problem.

View 3 Replies View Related

General :: Bochs Display A Black Screen Without Nothing?

Jun 16, 2010

I install Bochs on Ubuntu10.04 with compile,there is noting errors.but when I running the linuximage(download from:Below is code:

root@IManewer-linux:/home/imanewer/Oranges/linux-img# ls
bochsout.txt bochsrc minibootable.img README TESTFORM.txt
root@IManewer-linux:/home/imanewer/Oranges/linux-img# bochs -f bochsrc

[code]...

View 1 Replies View Related

Ubuntu / Apple :: IMac Display - Screen Will Just Go Black When Boot From A Live CD

Nov 18, 2010

I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.

View 3 Replies View Related

Ubuntu / Apple :: Screen On Display Entirely Black - External Monitor Never Becomes Active

Apr 3, 2011

Just did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:

1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..

2) external monitor never becomes active..

the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)

(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.

View 4 Replies View Related

Fedora :: Computer Display Suddenly Goes Black With No Response

Apr 9, 2011

This started happening about 1 hour ago. My computer display just went black, and the power light never changed state. I turned off it's power, and then back on (after a few seconds), and the power light came on "blue", which is what it's supposed to be, but i got nothing on the display, and hitting the menu buttons did not show a menu for the display, or any kind of response. i rebooted a couple of times, to no avail.

I thought my new display just crapped out, so i took it to another computer (windows xp laptop) and plugged in the vga cable (my server uses DVI), and it was fine. I took it to another computer (windows 7) with a DVI cable, and it was fine. I brought it back to my desktop/server, and plugged it back in, and it was fine again. Menu buttons and all.

Then, a few minutes later, it went out again. I turned the power for it off for a few minutes, then back on, and it came on with weird scanlines of various colors... then went back to black.

I played with unplugging the dvi cable in the back of the monitor/display, and wiggling it, and then at the computer connection, and at some point it came back on, for no obvious reason (i think i already stopped playing with it).

xorg.log was uneventful, but i can post it, if need be.

Dmesg shows this (the very last line of the NEXT post was the only one of any interest; but googling it returned no scenarious involving display crashes):

Code:
[ 15.615437] dracut: Switching root
[ 17.529852] udev[521]: starting version 161
[ 18.991277] ATK0110 ATK0110:00: EC enabled
[ 18.994541] EDAC MC: Ver: 2.1.0 Feb 7 2011
[ 19.044674] microcode: CPU0: patch_level=0x10000bf

[Code]....

View 1 Replies View Related

Fedora :: Black Screen And Message - Cannot Display This Mode 2:dvi-d - During F11 Install

Sep 1, 2009

F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.

(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.

I gave up! BTW I had checked all media CDs for errors.

(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.

I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.

After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:

Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.

Questions:

(1) what is this "cannot display this mode 2:dvi-d"?

(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l

Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.

View 2 Replies View Related

Fedora :: Can't Login To F14 / Display Goes Black And Redirected Back To The Log In Screen?

Nov 3, 2010

So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.

After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.

View 3 Replies View Related

OpenSUSE Hardware :: Display And Synaptics Touchpad Configuration - (getting Black)

May 14, 2010

I want make two simple changes in my display (energy management) & synaptics touchpad configuration:

1.Prevent the display from turning off (getting black) after 1 minute. Of course I checked the energy management configuration, but that has no effect at all.

2.Turn touchpad tapping off. I read Synaptics Touchpad - openSUSE, but the file /etc/X11/xorg.conf does not exist, but only /etc/X11/xorg.conf.install (or is it the same?). Also, there is no section with "driver synaptics" in it. Its content is

[Code]....

View 1 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8600 Gt - Display Is In Black

Jan 28, 2010

When i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?

View 4 Replies View Related

Hardware :: Can't Find Where To Get Monitor Display To Stay On So It Doesn't Go Black After 2 Min's

Feb 28, 2010

I could easily go to ms system monitor display by clicking on background of desktop and finding it through there to change settings related to desktop. I want to be able to watch a movie without the desktop screen saver thing going off. where can extend it to longer than 2-3 minutes on linux mint?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved