I install Bochs on Ubuntu10.04 with compile,there is noting errors.but when I running the linuximage(download from:Below is code:
root@IManewer-linux:/home/imanewer/Oranges/linux-img# ls
bochsout.txt bochsrc minibootable.img README TESTFORM.txt
root@IManewer-linux:/home/imanewer/Oranges/linux-img# bochs -f bochsrc
[code]...
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies View RelatedF9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies View RelatedI don't seem to have an "xorg.conf" file.
Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.
I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)
EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedJust did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedi am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedI've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
View 4 Replies View RelatedI am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
Here is the xorg.conf file:
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI'm newbie so I didn't know where to post my question. Well, here's my question: I'm trying to install bochs on Debian Squeeze but no success. I'd downloaded last version of bochs (2.4.6), then decompressed it and tried this: ./configure --enable-debugger --enable-disasm --prefix=/opt/bochs-2.4.2 --enable-mmx --enable-sse=4 --enable-fpu --enable-vbe --enable-sse-extension --enable-cpu-level=6
[Code]...
When i try to boot up for the 1st time it says: Completing Ubuntu Install. 5, 4, 3, 2, 1, 0 ... No Signal.I have installed with Wubi, and also tryed with a USB. Nothing works. Signal.
View 9 Replies View RelatedI just installed Ubuntu and after the restart all I get is a black screen. Sounds like the program booted up but I can't see any thing.
Using a Gforce 9400 vid card.
The windows programs run through the PlayOnLinux [URL].
I have installed PlayOnLinux 3.8.8, and the game Call of Duty 4 (COD4).
When run it, the sound is fine but the black screen.
The video card drivers are upgraded, is NVidia GeForce 8600M GT.
My system is openSUSE 11.3 with KDE.
I have a bad problem with debian 5.0 . I have installed it all right with no fail or error and when it boots,i just see a black screen with nothing else. My graphic card : Nvidia 9500M gs. I tried ubuntu,fodero but both of them were same after installing debian (Before i didn't have this problem)
View 3 Replies View RelatedAfter suspending my laptop, and then resuming the screen has black and white jagged wide zig zags across the screen. I can move the mouse and login fine, it's just the graphics are all screwed up. Has anyone had this problem before? Is this X? Is it a driver issue, my info is in my sig.
View 4 Replies View RelatedI am just new in Linux. Last week I install Linux Fedora12 into my notebook. The problem is sometime it come black screen when we want to start after booting. It also blank screen when want to tab to other properties in system. It is due to graphic card or else which the system used ATI Radeon.
View 1 Replies View RelatedI've just installed Zorin OS onto the hard drive of my Dell Inspiron 8000 laptop. I used the entire drive, overwriting Ubuntu9.10. Now my screen is black. I think the system loaded correctly - I can hear some welcome music and the active l.e.d. of my drive slows and stops flickering. But I can't see anything!Here's what I tried:
- using the keyboard controls to increase the brightness (no effect).
- connecting a flatscreen monitor from my desktop and attempting to use the FN+f6 keys to change the display from the laptop screen to the other (no effect)
- rebooting
- rebooting into Setup (my laptop screen lights up for perhaps 5 seconds and then goes black again)
- rebooting with Ubuntu 9.04 CD in the drive (no response)
- attempting to reboot with my original Windows ME re-installation disc in the drive (no effect)
How to avoid/resolve this problem. after i input user/password the VNC screen will just have a cursor
View 1 Replies View RelatedI left slackware 13 with airodumb and airplay executed in console for 6 hours. When I got back, konsole had something similar to "packet has length error". I could open the packet using aircrack -m option, but when i shut down the OS, it didnt shut down properly. Now when I do startx black window stays forever. I tried pkgtool and change to KDE but the same happens.
View 4 Replies View RelatedDual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.
View 3 Replies View RelatedI tried adjusting the resolution in Ubuntu so that it would fit better on my screen. The first one I tried worked ok, but when I tried a higher resolution the screen went black. Now I can't see anything on the screen so I can't change the resolution back to where it was. If I hit esc when booting up, is there anything I can do that will change it back to the default?
View 1 Replies View Relatedwhenever i open my kubuntu desktop it brings a black screen. the pointer of the mouse is active but i cannot see anything.but my gnome desktop works well.what might be wrong?
View 5 Replies View RelatedI have been trying to install Ubuntu 10.10 in my windows box.I boot with the CD (reset), it starts, I get a black screen with a small logo on the bottom.After a while (with the CD working), the screen goes blank. At this point, the machine reads some more from the CD and then stops... with the screen blank.On the hardrive I have a partition from an older version of linux (Ubuntu 8.something), just the user directories (the partition where I had Linux was killed when I reinstalled Windows).
The machine remains in that state (I've left it on overnight), no HD activity, nothing. Only response I can coax out of it is when I press ctrl+alt+del, and the machine reboots (still, screen is black, no shutdown message).
I have an Acer Aspire 5102 WLMi laptop, that I purchased 5 years ago. It has the following:AMD Turion 64x2 Mobile Technology TL50 (1.6GHz, 512 KB L2 cache)ATI Radeon Xpress 1100120GB PATA HDD hard drive (60 gigs for the C: drive FAT32, 60 for the D: drive, NTFS)I have Windows XP Media Center edition installed on my pc, and I want to install linux. This is my first time installing linux on anything. My laptop's cd drive doesn't work, so I wanted to boot from a USB or from hard disk. I googled around and found unetbootin, which I ran. When I ask it to use the hard disk, I select Debian stable and the one where it loads everything up beforehand, not the netboot. This is because the netboot option wasn't working - it gave me a similar problem. Anyways, I boot up, and I have a choice between unetbootin and windows xp. When I choose unetbootin, it says:
Booting 'Unetbootin'
(hd0,1)
Filesystem type is fat, partition type 0xc
[code]....