Ubuntu :: Display - Black Screen Instead Of Standby
Mar 21, 2010
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
View 1 Replies
ADVERTISEMENT
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Jun 16, 2010
I install Bochs on Ubuntu10.04 with compile,there is noting errors.but when I running the linuximage(download from:Below is code:
root@IManewer-linux:/home/imanewer/Oranges/linux-img# ls
bochsout.txt bochsrc minibootable.img README TESTFORM.txt
root@IManewer-linux:/home/imanewer/Oranges/linux-img# bochs -f bochsrc
[code]...
View 1 Replies
View Related
Nov 30, 2010
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies
View Related
Sep 5, 2010
I don't seem to have an "xorg.conf" file.
Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.
I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)
EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288
View 9 Replies
View Related
Nov 18, 2010
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies
View Related
Apr 3, 2011
Just did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
View 4 Replies
View Related
Sep 1, 2009
F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
View 2 Replies
View Related
Nov 3, 2010
So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
View 3 Replies
View Related
Jun 27, 2010
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
View 2 Replies
View Related
Apr 14, 2010
This is probably really a quick fix but I cannot seem to find it. When I close my laptop lid it brings me to the standby screen which then asks me to put my password in, when i log in I managed to make it not ask me for a password but on the standby screen it still does.
It's just annoying me a little and wouldnt mind just being able to open my laptop and go. also same kinda problem with installing software, always asking for passwords but I guess i can live with that one.
View 1 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Feb 18, 2010
When the computer is in standby i press the power button and it whirrs into life but the screen stays blank and the power light stays orange.
Only way to sort it is to turn it off then on again.
View 1 Replies
View Related
May 1, 2010
Plenty of people seem to be having issues with the nvidia graphics drivers, so I thought I'd add my woes to the heap. My issue is that I run two screens under twinview, but the second one doesn't work for some reason. More specifically, the Nvidia-settings tool is able to detect my second monitor, and I'm able to assign it a resolution and position and the like, and my desktop seems to extend over to where the second monitor is, but the monitor just remains in standby mode.
This happened with the drivers proprietary drivers that Nvidia tried to install (version 173 I believe) so I removed them and tried to install the 195 drivers manually, which I eventually figured out how to do (by blacklisting the nouveau module amongst other things). This still didn't fix things, and gave me the same issue.
(As an aside, where can I find the nvidia-glx-195 and nvidia-modaliases-195 packages, as they seem to have disappeared from the LP-PPA-nvidia-vdpau repository where they apparently used to be?)
The strange part though, is that my second screen works fine if I don't install any nvidia drivers, and just use the System->Preferences->Monitors applet. The second screen comes out of standby and works nicely.
One other little thing I've noticed that may have something to do with it, is that if I switch the outputs that the monitors are connected to, the other monitor will work. The output whose monitor doesn't work is always the one that has the DVI->VGA converter. Could this have something to do with it?
View 3 Replies
View Related
Jun 8, 2010
When I put my laptop to sleep (clamshell close) it goes to sleep and is a happy laptop.
When I open the laptop, I can hear the thing going and waking up. However the screen stays off. Brightness keys do nothing. (however they did nothing in the first place as I'm using the NVIDIA driver). I have to do a hard reset to fix things.
The strange thing about this is Sleeping / Waking up has never been an issue till about today.
View 5 Replies
View Related
Jan 7, 2010
As part of making a encrypted private folder i told encfs to encrypt swap space on my pc knowing that this would probably break sleep and hibernation. That said i just turned on ubuntu for 5 mins, had to go away for a bit, when i came back to unlock the screen my password was not being accepted, and another 5 mins later the screen said that my session had timed out-i had to do a cold reboot Does this mean i cant lock the screen anymore?
View 7 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Oct 1, 2010
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Nov 30, 2010
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
View 3 Replies
View Related
May 16, 2011
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies
View Related
Jul 4, 2010
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Feb 26, 2010
Has anyone seen or heard of the following problem? I have a 1in black border surrounding my display. I've been running google searches all day without much luck. My current setup is as follows: Ubuntu 9.10 (64-bit), 24in asus lcd, Radeon 5770, amd phenom 2 x4, ddr3 4gb, gigabyte mb. I noticed the border while running the live cd. I figured it had something to do with the video drivers. Last night I installed ATI's linux driver 10.2. I'm getting my preferred resolution of 1920x1080 over dvi. But i'm not able to use my full 24in. It's like using a 20in lcd.
View 6 Replies
View Related
Oct 7, 2010
I installed Ubuntu on a Toshiba Satellite about a month ago. It worked for about three hours. I installed Wine, and it still worked but the display would sometimes go black for a few seconds. Later that day I rebooted and that was it, no more Ubuntu. It goes through all of the process of booting but then the screen just goes black before I even get to the purple Ubuntu screen. I'm running this on a drive in an enclosure so I simply plugged the drive into another machine ( actually two other machines ), and it works perfectly. I have an old Vista drive that I put in the Toshiba and that works just fine, so it's not a pure hardware issue. Just to be sure I wiped the Ubuntu drive and re-installed, this time without installing wine. No Toshiba love. Just the black screen. I even made a flash drive with the loader and iso from the Ubuntu site. Same deal. It starts to boot from the flash and then just goes black where you would normally expect the purple Ubuntu screen. This thing is driving me nuts and I am at a point where I really need this machine working and will be faced with simply wiping the Ubuntu drive and installing Windows.
View 9 Replies
View Related
