Ubuntu Installation :: Install To USB - Black Screen - Monitor Is On And Lit - Just Nothing On The Display
Nov 30, 2010
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies
ADVERTISEMENT
Apr 3, 2011
Just did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
View 4 Replies
View Related
Jun 18, 2011
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies
View Related
Sep 1, 2009
F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
View 2 Replies
View Related
Jul 13, 2011
I have just "finished" updating my Ubuntu 9.10. (somehow I knew that something is going to go wrong), and now my PC starts, works fine for a few seconds, then I get a black screen for a moment, and then my monitor starts acting like PC is off.Interestingly I think that otherwise everything is working just fine and that I just can't see anything due to the black screen (monitor is flashing like there is no signal coming from PC).
View 3 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Nov 30, 2010
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
View 3 Replies
View Related
Feb 28, 2010
I could easily go to ms system monitor display by clicking on background of desktop and finding it through there to change settings related to desktop. I want to be able to watch a movie without the desktop screen saver thing going off. where can extend it to longer than 2-3 minutes on linux mint?
View 8 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Dec 15, 2009
I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
Here is the xorg.conf file:
View 2 Replies
View Related
Mar 6, 2010
i tried to install linux mint, at first i got 'out of range' with black screen msg but used compability mode and got past it and installed mint on my HD. a moment after it updated my nvidia drivers and after reboot I got the out of range message again, which leaves me in the situation where i cant do pretty much anything I tried editing xorg.conf added VertRefresh 60-75 and Modes "1440x900_75.00"
View 4 Replies
View Related
Mar 23, 2010
I have an Intel Corporation Mobile 945GM chipset. As I was playing around, trying to figure out how to get my dual monitor to work. The Mirror Screen was working fine, but then I uncheck the mirror screen option, both my laptop and my secondary monitor black out. I can only see the mouse, and it cans move on both screen.
Here is my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code]....
View 3 Replies
View Related
Jul 2, 2009
I have this very frustrating problem... I'm trying to build a Linux-based HTPC (Home Theatre PC). I'm running Ubuntu 9.04 Jaunty as the operating system, and it works fine when I have it connected to my 17" Samsung monitor. However, when I connect the HTPC to the TV via VGA I get a black screen after "startx" (I can access the console through recovery mode though). Ubuntu is running gnome, so I guess it's a gnome related problem?
I would have thought it was a problem with the drivers to graphics card, but since it's working on my 17" monitor I've ruled that out. The TVs resolution is 1024x768. What can be causing this? Apperently there's some difference between my monitor and my TV (forgetting the fact that it is indeed a TV, not a monitor), but what? I've previously run Windows on the same hardware without problems, and thought I should give Linux a shot. It doesn't look good...
View 14 Replies
View Related
Mar 21, 2010
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
View 1 Replies
View Related
May 27, 2010
I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.
View 9 Replies
View Related
Sep 13, 2010
I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.
At first I tried to install it with wubi, but it won't work always the same problem.
Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.
I tried it with just installing, alternate install, but it's everytime the same problem.
View 4 Replies
View Related
Dec 5, 2010
After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.
View 6 Replies
View Related
Apr 29, 2011
after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )
View 9 Replies
View Related
Jun 11, 2011
I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.
View 5 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Jan 12, 2010
I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!
I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM
View 2 Replies
View Related
Feb 1, 2010
I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.
View 9 Replies
View Related
Apr 30, 2010
I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
View 9 Replies
View Related
Jul 3, 2010
I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.
View 6 Replies
View Related
Jul 29, 2010
I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
View 3 Replies
View Related
Mar 17, 2011
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
View 9 Replies
View Related
Mar 17, 2011
I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.
View 5 Replies
View Related
Jun 16, 2010
I install Bochs on Ubuntu10.04 with compile,there is noting errors.but when I running the linuximage(download from:Below is code:
root@IManewer-linux:/home/imanewer/Oranges/linux-img# ls
bochsout.txt bochsrc minibootable.img README TESTFORM.txt
root@IManewer-linux:/home/imanewer/Oranges/linux-img# bochs -f bochsrc
[code]...
View 1 Replies
View Related
