Fedora Hardware :: Display Complete Hardware Information Of Computer System?

Jun 3, 2010

Can anybody tell me how to display the complete hardware information (hardware profile)
of my computer system? I use Gnome.

View 5 Replies


ADVERTISEMENT

Fedora :: Write A Program Which Would Get Information From A Webpage And Display The Information On Desktop Sort Of Like A Widget?

Sep 3, 2009

I'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?

View 1 Replies View Related

Red Hat / Fedora :: Way To Display All User ID Information?

May 4, 2010

Does anybody know of a way to display all user ID information? Akin to the lsuser command from AIX? Need to find out if an ID is disabled/locked out sucessfully.

View 1 Replies View Related

Fedora :: Which Program Of KDE Or Of Gnome Of F14 Can Display Hardware Information

Nov 4, 2010

which program of KDE or of Gnome of F14 can display hardware information?

View 4 Replies View Related

Fedora :: System-config-display Just Ruined Display?

Jun 29, 2010

I did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?

View 14 Replies View Related

Fedora :: Need Terminal Command For System Information

Jul 22, 2010

I'm sure this answer is out there but I cannot find it. I thought there was a command you could put in the terminal to find out what version of Fedora you are running and also tell which architecture (either 32 bit or 64 bit) it is. Does anyone know what that command is?

View 2 Replies View Related

Fedora :: Where To Find Information About System Crashes?

Jun 17, 2011

I randomly get system crashes of a fresh Fedora 15 install.
I cannot reproduce, however.

Where would I find information on system crashed (kernel panics)?

View 3 Replies View Related

Fedora :: No Display When Computer Comes Out Of Hibernation?

Dec 19, 2009

Every other time my system comes out of hibernation, I see the blue Fedora screen loading like the computer is powering back on, and all of the sudden the screen goes blank, as if it shut itself back off. The funny thing is the power button is still on, but there is no display. Has anyone heard of this issue before. I'm not sure what to try to get it fixed

View 1 Replies View Related

General :: How To Get Complete Backup Of Whole Computer

Mar 5, 2010

It's about creating a complete backup of my machine. What I want to do is completely backup my whole computer, everything!, because I've got it just right. If something were to go wrong then I want to restore right back to the way the system is right now (from a rescue disk). I know that using dd to do a byte level backup would be best but I read that it's not all that great for restoring the system (HDD's sizes must be the same).

Rsync looks favorite but can it copy the root directory. i.e. "rsync -a / /media/backup/" and all the partitions. I just not sure whether it can do the whole computer. Dump is another tool but it seems to have dependencies to tool versions. And again I don't know if it will do the whole system and how easy it is to restore. There is a tool called FSArchiver that looks to do what I want and it comes part of SystemRescueCd (a bootable CD used to fix computers). It turns out that the backup I'm looking to do is at the file system level where the tools above are really file level backups.

View 5 Replies View Related

Fedora :: Computer Display Suddenly Goes Black With No Response

Apr 9, 2011

This started happening about 1 hour ago. My computer display just went black, and the power light never changed state. I turned off it's power, and then back on (after a few seconds), and the power light came on "blue", which is what it's supposed to be, but i got nothing on the display, and hitting the menu buttons did not show a menu for the display, or any kind of response. i rebooted a couple of times, to no avail.

I thought my new display just crapped out, so i took it to another computer (windows xp laptop) and plugged in the vga cable (my server uses DVI), and it was fine. I took it to another computer (windows 7) with a DVI cable, and it was fine. I brought it back to my desktop/server, and plugged it back in, and it was fine again. Menu buttons and all.

Then, a few minutes later, it went out again. I turned the power for it off for a few minutes, then back on, and it came on with weird scanlines of various colors... then went back to black.

I played with unplugging the dvi cable in the back of the monitor/display, and wiggling it, and then at the computer connection, and at some point it came back on, for no obvious reason (i think i already stopped playing with it).

xorg.log was uneventful, but i can post it, if need be.

Dmesg shows this (the very last line of the NEXT post was the only one of any interest; but googling it returned no scenarious involving display crashes):

Code:
[ 15.615437] dracut: Switching root
[ 17.529852] udev[521]: starting version 161
[ 18.991277] ATK0110 ATK0110:00: EC enabled
[ 18.994541] EDAC MC: Ver: 2.1.0 Feb 7 2011
[ 19.044674] microcode: CPU0: patch_level=0x10000bf

[Code]....

View 1 Replies View Related

Fedora :: Yum Complete Transaction Won't Complete

Oct 15, 2009

I am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?

View 2 Replies View Related

Ubuntu :: Display Info On CPU Temp & Other Sensor Information?

Dec 17, 2010

Is there a Linux application which can display motherboard and CPU sensor information and which also satisfies one other, absolutely key, requirement: It should be directly usable, after installation, by a reasonably intelligent computer application user. That is, it does NOT require deep internal knowledge of specific hardware or obscure system software customisation. It does not require hours, days or weeks of reading of documentation which is so crafted as to be the antithesis of end-user guides. It must be capable of being invoked easily.

This eliminates all software that the Ubuntu Software Centre lists when performing a search with the term 'sensors', with the exception of xsensors. All other software listed with this search installs without error but is then totally invisible to me - not even listed under 'installed software'. I am aware a key requirement to be a Linux developer is an advanced commitment to play games of 'I bet I can make my software harder to use than yours', but I'm too old for that now. I don't have a need to prove how technically capable I am.

Xsensors installs and tells me where it can be found, but is inadequate as it lists only 2 CPU core temperature readings. It does not give me any indication of motherboard temperature or fan speeds. That's all I want to do - get a simple snapshot of sensor values without having to resort to entering BIOS setup. It's the sort of information that is so easily available using the ASUS-supplied 'asus-probe' software under Windows. Is it possible, given the key requirement previously mentioned?

View 9 Replies View Related

Networking :: Create A Script To Display DNS And IP Address Information?

Jan 5, 2011

I have been playing with Linux consistently for a couple of months now. I've been a Windows sys. admin for most of my career, so Linux is pretty strange for me. I started off with computers way back with the TRS-80 and then eventually moved to DOS systems. So the command line interface (CLI) of Linux was not completely alien to me, yet my lack of knowledge on the syntax and commands is holding me back. I have come a long way.

Recently I needed to play around with some DNS settings and one of the commands I used frequently in Windows, IPCONFIG /ALL, doesn't have a direct relative that displayed the same information. If you run ifconfig, it doesn't return the DNS servers you are currently using. You have to run a separate command to retrieve that information.

What I have done is created a super simple script that displays the network information for my primary LAN adapter, which is ETH0 in my case. After that, it shows the domain and name server information. Then it pauses for 20 seconds before closing the terminal window.

Here are the contents of the script file:

ifconfig -a eth0
cat /etc/resolv.conf
sleep 20

I simply right-clicked the Linux desktop, choose Create Document, Empty File. I named it something like Network Info. Then I opened it and put this information in it, saved it, and closed it. I renamed the file and added a .sh extension to the end which makes it into a script file. Next, right-click the script and go to properties. In the Permissions tab, check the box next to Execute: Allow executing file as a program. Then click close.

To run the script, just double-click the icon and then click Run In Terminal at the prompt. The terminal window opens, displays the information, and exits after 20 seconds. If you need it longer than that or need a different interface (such as wlan0 for your wireless), you can change or even add that in.

This was all done in Ubuntu 10.10. I know it is very simple and very straight forward and welcome thoughts and feedback about simpler ways to do this. For me, the old-school Windows admin, it's a baby step in the right direction. I am really enjoying learning the Linux OS.

View 7 Replies View Related

General :: Display User's Last Login Information When Connected Through FTP?

Apr 11, 2011

I want the last login information whenever I log in through FTP.

This is possible for normal console and SSH logins by configuring in /etc/login.defs file. But I am not able to view the last login information when FTP is used.

View 5 Replies View Related

General :: Display Password Policy Information For A User - Ubuntu?

Jun 9, 2010

Ubuntu Documentation > Ubuntu 9.04 > Ubuntu Server Guide > Security > User Management states that there is a default minimum password length for Ubuntu:

Say the password is to be modified by the user using passwd. Is there a command for displaying the current password policies for a user (such as the chage command displays the password expiration information for a specific user)?

This is rather than examining various places that control the policy and interpreting them since the process could contain errors. A command that reports the composed policy would be used to check the policy setting steps.

View 1 Replies View Related

Debian :: Domain Name - When Reboot The Computer - Information Lost ?

Aug 4, 2010

I insert the domain name "g3c" in menu: System->Administration->Network (file attach)

When i reboot the computer this information lost: why ?

Where i must insert this information ?

My s.o. is debian 5.05

View 2 Replies View Related

Programming :: Create Script That Gives Network Computer Information?

Oct 28, 2009

I am new to scripting and I have planned to create script which gives me network computer inforamtion. therefore, I want to know how to write script that sends me computer information to my email add.

View 4 Replies View Related

Fedora :: Where Is System-config-display?

Mar 8, 2010

My machine is a new Fedora Core 12 install. The install did not make an /etc/x11/xorg.conf file by default, which is odd. So, I want to change things with the display. But there's no "system-config-display" in /usr/bin. What's going on? Why wasn't this installed by default? I've had lots of other problems with X on this machine as well:

the 10x20 fonts were missing XFree86-Misc error messages whenever I start an xterm I also receive these warnings, intermittantly, when I create xterms:

Code:
Xlib: extension "XFree86-Misc" missing on display ":0.0".
xmodmap: please release the following keys within 2 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 4 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 8 seconds:
Control_L (keysym 0xffe3, keycode 37)

With this many problems I want to know if there's something in general broken with X on FC12, or was that just my install, or what?

View 6 Replies View Related

Fedora :: System-config-display Won't Run?

Dec 29, 2008

FC10/KDE system-config-display won't run and no error messages in /var/log/messages

# system-config-display
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>

[code]...

View 8 Replies View Related

General :: Determine Whether Computer 'gets IP Address Information From Dhcp Server On Network'

Sep 24, 2010

First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?

View 2 Replies View Related

Ubuntu Networking :: Check The Network Connection Applet, It Display Active Information Of Eth0?

Jun 7, 2010

I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.

View 7 Replies View Related

Fedora Installation :: F11 - System Config Display Will Not Run

Jun 29, 2009

I just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:

Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor

If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.

View 14 Replies View Related

Fedora :: System Display Config Does Not Work?

Jun 17, 2010

When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now

View 5 Replies View Related

Fedora Hardware :: Can't Find System - Config - Display?

Mar 2, 2010

When I installed F11 it didn't have the i810 driver so it defaulted to VESA. I upgraded to F12 using preupgrade and thought it would re-detect the graphical hardware and didn't. I want to recreate xorg.conf for my computer (Toshiba Satellite A45-S25) so I can use Compiz and some 3D application but I can't find system-config-display. It's missing from the system and I don't know what package it belongs to so I can't re-install it.

View 2 Replies View Related

Fedora :: Can't Find System-config-display Packages?

Feb 2, 2011

I can't change my screen resolution but my fedora doesn't have system-config-display. Trying to install this package and for some reason it is not listed under the add/remove software, and yum says it can't find it either.

# yum install -y system-config-display
results
No package system-config-display available.
Error: Nothing to do

Searching in the add/remove software I found some others such as system-config-firewall, system-config-date and etc but it doesn't have system-config-display. Is there any other way to install this package? currently running kernal linux 2.6.35.9-64.fc14.x86_64 , fedora 14 on 64 bit system gnome 2.32.0

View 8 Replies View Related

Ubuntu :: How To Backup Complete System

Sep 9, 2010

I removed windows completely from my Dell Inspiron N5010 and installed Ubuntu 10.04.1 64bit. In windows I have the option to create the system image of system's current state so that if something goes wrong I could easily restore my system using that image( I am not talking about windows Restore facility). I wanted to know that if there is something available in Ubuntu also. I cant use Dell recovery media creator as I have deleted recovery partition. I have already used Remastersys and it also did its job well but after restoring my Graphics card driver did not work well.

View 4 Replies View Related

Red Hat / Fedora :: Able To Vnc Into The Computer Without Having Logged Into The System Physically

Nov 6, 2010

I've used linux systems before, but the last time I actually set up a server was when fedora core 4 came out, which was, to say the least, quite a while ago. here's my core dilemma: atm, I have fedora 13 set up, and i'm looking to be able to vnc into it WITHOUT already having logged on as a user. I've tried various things and I'm having little to no luck. I uninstalled tigervnc and installed the original vnc package (With server) from realvnc.com. I've also installed xinetd and tried to get it to incorporate vncserver as a startup service, to no avail.

I have not been able to connect to the vncserver regardless of how I try. I AM able to connect to the base remote desktop functionality provided by fedora (Also vnc based). However, as soon as I disable that, I am not able to vnc into it at all. Long story short, here are the current goals:

1) be able to vnc into the computer without having logged into the system physically
2) have those logins be un / passworded. i.e., be able to login as whatever user
3) complete disable the normal graphical startup that fedora provides, since I don't think there's ever going to be a person physically at the computer and I'd like to maximize system resources

Also, if VNC is NOT the easiest way to do something like this, please let me know, I'm completely amenable to taking another route. In short, I'd like non-physical per-user graphical access to the server. I'd also like it to be more than one single vnc session, as I may have it open from either multiple locations or multiple users.

View 5 Replies View Related

Ubuntu :: Complete System Failure When CPU Is Stressed

Jul 24, 2010

I get a complete system failure when my CPU is stressed. It's not the temperature because when it crashes the CPU temp is only ~55 C. When it crashes the video freezes but the sound repeats itself. Example. I start handbraking a movie, then open a tv show in VLC. This is what I hear.

Did you get that tire - then it freezes

get that tire
get that tire
get that tire
get that tire
... etc

That continues until I reboot my computer. This crash is pretty reliable, as every time I load my CPU that happens. If I don't do anything CPU intensive, I don't get the crash. Also, if I only load up one core of my CPU, then everything is fine. However if I run something such as prime95 or handbrake (which both utilize all 4 of my cores) the computer will crash within 30 seconds.

Ubuntu 10.04
Corsair 750 TX PSU
AMD Phenom x4 @ 2.3 GHz
4 GB G.Skill 1066 DDR2 Memory
Nvidia GTS 250 1 GB edition
Biostar AMD 770 AM2+/AM2 Motherboard
Three HDs, two are WD of 1 TB and 120 GB, and a 32 GB SSD.

View 6 Replies View Related

Ubuntu :: 10.04 - Any Way To Make Complete Replica Of System

Jul 24, 2010

I'm on ubuntu 10.04, and pretty new to it - over the last 2 weeks I've done probably 10+ fresh installs due to me not knowing the system, trying things. I looked for a way to back it up and found this guide - [URL]. When I use the feature as listet, it doesn't exclude the folders, and the system is "almost" the same as pre-recovery - and I'm copy/pasting. Is there a way to make a COMPLETE replica of my system, that I can launch when failed, so that - it's back to when I was "ok".. like all programs install post-copy to be gone..

View 2 Replies View Related

Ubuntu :: 2 Complete System Crashes In 2 Days

Apr 13, 2011

My laptop running Ubuntu 10.10 had suddenly go to a dark gray screen that will not take any kind of input other than holding to power button down for 5 seconds. I'm not running any new or odd programs just Firefox, Openofice writer, and Pidgin. When I turn the computer back on I do not see any kind of an error message. I'm looking for any advice that will help me find the cause of the problem.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved