Ubuntu :: Sudden Black Screen Until Restart Computer
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
10.04 runs perfectly most of the time, then every once-in-awhile it crashes. The screen goes black and I have to restart. I had a similar problem with 9.10, so I reverted back to 8.04 which never crashed. I did a fresh install of 10.04.
so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!
I upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
having trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:
intel QM57 chipset i7 extreme 920xm quadro fx 1800m
am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.
I had Ubuntu 10.04 on my 500GB Samsung drive. Today it suddenly stopped responding, not only X11 but the whole system (Ctrl + alt + f1 didn't worked either) so I had to force restart it. Since then, I can't boot it again - right after memory test and general motherboard splash, the white line cursor goes about 3 lines down of topline and stops there. After about 5 minutes there's still no GRUB menu. Finally I had reinstalled the system (which is not really much pain since my "home" was on other partition than the system, but it didn't helped - still the same. On the other hand, booting USB Live works perfectly fine (I'm using it right now). I have an access to all the partitions, all the data seems to be there, SMART utility says the hdd is healthy ..
Oh, and I tried reinstalling with grub-reinstall before, it said that the reinstallation went fine but didn't helped either
Every time I restart my computer the screen resolution changes back. I've recently started to use XFCE, it didn't do it in GNOME. what can I do to make it stay the same?
I have an 80GB HDD where I installed Windows XP first and then Ubuntu. The thing is that whenever I shut down my computer and then turn it back on (wether it's right away or a few hours later, or the next day), I get the GRUB screen where you have to choose Ubuntu, but after that just a completely black screen. I then have to force a shutdown, then turn it back on, and it works. Whenever I restart it works too, this seems to happen only after a shutdown.
Specs: Dell Dimension 4600 P4 2.8 GHz procesor 2GB RAM ATI Radeon x1650 video card 80GB HDD
I can't get Ubuntu to reinstall on my computer... I recently reformatted and re-installed windows and I think that might be the problem because I was running Ubuntu 64-bit before I reformatted... Now the problem I am getting is when I go to boot up Ubuntu to finish the install it loads on the purple screen with the Ubuntu logo then goes into a black screen with white letters. Its the screen that tells you to reboot and go into windows a run 'chkdsk /r' and reboot again, the problem is I have followed those directions 3 times and it didn't work, I don't think the operating system really knows what the problem is.
Actually when I am working on internet.. The computer closed all programs and a black screen appeared asking me login : and Password after it... later It showed me that there are some update packages ... I didn't know how to get out of that except to restart ...
i did the upgrade thru the update manager but when i rebooted my comp, my computer didnt go pass the black screen with the bar blinking. what black screen im talking about
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
I had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?
on a 6-7 years old compaq laptop, connected to a brand new hp monitor i am having a mismatch with computer/monitor resolution.
before i had ubuntu 10.04 which could only run in x's safe graphics mode - allowing for full screen resolution but with handicapped graphics - for example videos fullscreen would be quirky and run with cpu at 100%, something which was no problem before 10.04.
then i tried ubuntu 10.10 and later lubuntu 10.10 (which had exactly the same problem); the monitor is running 1440x900 while the computer is rendering to only 1024x768 - leaving a huge black border on right and bottom of screen. the gfx is still crippled; videos fullscreen is quirky as before.
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR..... Turning on gate a 20 .... Success Srating cmain() .... _"
So I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.
I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
While using Ubuntu I have had few problems and it has generally just worked. One problem I have had is that while using my computer on occasion everything will be stopped and there will a message against a black background telling me the graphics card and screen could not be detected I have several options which are something like.
Run Ubuntu in low graphics mode for one session (which brings me to a normal login) Run Ubuntu from a console (or something like that, it goes to a console) Troubleshoot the error (I'm new to Ubuntu and never tried it) Restart X (I never used it)
I think I missed one or two. "Run Ubuntu in low graphics mode for one session" works for me, but it is still a nuisance that I have to login again. It doesn't happen that often, not everyday at least and happens at random. I could have been using it for over an hour so I wonder why it suddenly can't detect the graphics card or monitor.
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
im new to Ubuntu and not look at it all in depth yet. I have a small issue. Im using a Toshiba Satellite A200 Laptop. I installed Ubuntu on it yesterday because i was fed up of windows vista. On windows Vista i use to Plug the laptop into a 50" LG plasma and watch online movies and sports. And for the audio i used a USB cable from the laptop into a Pioneer VSA-AX10Ai Amp. My issue is.I plugged the VGA cable in today to test it on Ubuntu. I went into apps/sys/display and all of a sudden the laptop screen just kept flashing on and off. the Tv was saying in the top left 32" and because of all the flashing i could not do anything so i just turned the laptop off. I have not attempted the Audio Via USB yet . I know vista and my IMAC auto picked up the AMP but not on UBUNTU can anyone help me with the Screen issue ??????
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
i have a problem i cant access remote support on teamviewer but i have access to transfer file. is there a way to make a file and send it to restart the computer. or is there anyway i can restart the computer over the internet. i cant be physically be at that computer for another 1 week.
Have installed Ubuntu Lucid and I'm unable to restart the computer. Doesn't work using the power icon in the top right or using sudo reboot from the termial - I have to hit the reset button to get the computer going again. The problem is only related to restart - shutdown works as it should. When I try to reboot, the screen goes black aside from a narrow band of crimson on the far left of the screen; it freezes at that point. I've had a look through the var/log/messages and saw nothing that was an obvious problem, but then again it's not something I've ever had to look at before. Tried adding acpi=off as an option but that seemed to make no difference.
Not sure whether it's relevant, but specs are 3ghz Core 2 Duo; ATI 4850;4gb ram; Gigabyte motherboard with Intel p31 express chipset.
