When I close the lid on my Dell Latitude e6510 running Fedora 14/Gnome, the machine seems to suspend correctly. When I reopen the lid or otherwise try to awaken it, I get a text screen showing:
I am running with Linux installed on an external Passport drive, selected via F12 during startup.
Now Debian6 suspend and rstart is all ok!
Auto start a program with login is ok.
How to auto start a program with debian suspended and restart ?
Maybe with gdm3 or NIC....?
How can I catch a event to auto start my program?
Lenovo X200 notebook, 64bit maverick, external monitor connected through DisplayPort, fast SSD drive, encrypted homeI'm almost positive these issues were non existent after installing 10.10RC, but I'm not 100% sure. Maybe I will install it again to check it outAnyway, when I try to suspend/restart/shutdown/logout the system often freezes, showing the console with the similar output:I know this guy is running Ubuntu in VM, but I have very similar ouput, except the last usplash line.But the first line I always have in the output is the infamousQuote:GLIb-WARNING **: getpwid_r(): failed due to unknown user id (0)On a very rare occassion, the system hanged while booting (showing the above glib line as well. But that's quite rare, so I'm not that concerned.
Now, sometimes it does respond to ctrl+alt+delete after freezing, and after I hit this combination, another line appears (from memory):Quote:Init: rc main process killed by TERM signalChecking for running unattended-upgradesBut that's it, I cannot do anything else, only hard reset, which is especially painful when I suspend in the middle of work...There is no interesting information in the logs - a few messages in the kern.log, but nothing I think would show the culpritEDIT: other than that, the machine is very stable and I have no issues with it. It also worked perfectly on lucid 32bit.
I recently converted an ageing Toshiba 2410-303 laptop (Intel 1.7 GHz, 512 MB, 28 GB HD) from Windows XP to Xubuntu. Everything was running fine & dandy until yesterday I had the (unfortunate it seems) idea to use the "Suspend" button at the end of a working session (until that day I had only used "shut down" or "restart" (the anglosaxon words may be different since I run a dutch language version)). Anyway, my laptop immediately went into the standby/suspend modus and several hours later I was unable to resume normal operation with the usual mouse movement or enter key. Nothing happened.
I've tried the following:
- press the power button for 2 sec, result: the ventilator starts up, I hear the HD spinning and the power led starts blinking orange (the Toshiba manual tells me this means the laptop is in standby) and I hear a regular system beep. But ... Xubuntu does not start at all. If I continue pressing the power button, the laptop shuts down completely.
- I removed the battery temporarily, reinserted it and repeated the above procedure but still ... no luck.
I cannot open the cd tray, so reinstalling is not an option either.
I have tried various other key combinations such as ctrl+alt+del etc. but to no avail. It seems that I'm stuck with a useless laptop now.
I'm reasonably convinced my laptop is not dead yet but it cannot be approached for the time being.
If I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View Related3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
Hibernate works wonderfully, but when suspend the system the CPU Fan continues to spin away. Not sure about the case fans/hdd as their sounds are dwarfed by the CPU fan.
The system is built around a Gigabyte motherboard (model: GA-MA78GM-S2H)
I have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
View 5 Replies View Relatedi have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
I'm running off the most current kernel for Fedora 11 x64 and all packages are upgraded. I didn't hit the suspend button at any time but it went down to disk (black screen, soft yellow power light) and the lid had to be opened again for things to work properly.
View 2 Replies View RelatedI have a web server running on my laptop(in fact , it's a netbook). But I found it always hibernate automatically in a certain time .(In fact , I don't know what's the differences between hibernate or suspend. So I call this hibernate instead.) I am sure I have disabled the hibernate function in Power-Management from the System menu. But it still hibernates as usual.So could someone tell me how to disable it ( suspend,hibernate whatever )?
View 6 Replies View RelatedI have a laptop that I wish to keep on even when lid is closed, but I am unable to accomplish this. Does anyone have an idea where to look?
System is Fedora 13 (Rawhide).
gdm-2.29.4-1.fc13.x86_64
gnome-power-manager-2.29.1-2.fc13.x86_64
It all works if I boot my self compiled vanilla 2.6.35-rc3 though. The environment
Sony vaio VGN-SR21M 4GBRAM P8400, ATI HD3400 mobility. I use
kernel-2.6.35.6-45.fc14.x86_64
xorg-x11-drv-ati.x86_64-6.13.1-0.3.20100705git37b348059.fc14
If I suspend my notebook it starts the usual slow orange blinking indicating the suspend mode got reached. There is also evidence in the various log files that this works. If I try to resume it hangs a for 3 seconds and then I get the hdd-password screen from my bios and the notebook boots from zero. I couldn't find anything in /var/log/messages nor dmesg. If I first boot to windows (grub 2nd partition) and then restart and boot to linux, all the suspend works fine
how do i disable the screen lock after i wake my computer from suspend? i would prefer to be able to just wake the computer up and have it go right to the desktop, without having to enter a password. i used to use ubuntu until today, and i remember having to run "gconf-editor" and then switching off on "lock_on_suspend" under apps/gnome-power-management from the menu that popped up. i tried to run "gconf-editor" in fedora 15, but that doesn't appear to exist. i've searched around and haven't been able to find an answer, so i'm wondering if anybody knows what to do?
View 3 Replies View RelatedThe machine completely locks up (Caps lock LED doesn't even light up). I've followed the wiki, but the following command did not yield any information. dmesg | grep "hash matches" after echo 1 > /sys/power/pm_trace
View 2 Replies View RelatedWhenever I choose "Restart" from the GDM screen, GDM appears to shutdown, and the first TTY is displayed with a login prompt at the bottom (assuming I haven't used that TTY). I am by no estimation a patient individual, but I waited a solid minute or two for something to happen, but nothing ever did. I end up logging in as root on that TTY and running "shutdown -r now" to get the job done. This is a shared computer, and ideally any user should be able to perform shutdown options graphically from GDM.The only mentioned workaround doesn't apply to me as I am using the nvidia driver, not intel.
View 1 Replies View RelatedStarting with kernels 2.6.29.x and above (which includes 2.6.30.x and 2.6.31.x),whether obtained from "kernel.org" of from the "FC11 repository", none of theseresume properly after putting the computer to sleep (suspend)... in my case, via"pm-suspend".When I press the "On" button, I hear the fan, but get no video. And the fan neverreturns to the normal resumed, slower speed -- which it normally does after aroper resume.Eventually I have to issue "Ctrl + Alt + Delete" to reboot. So the computeris resumed to some degree (to have been able to accept that sequence), butnot all the way - no video (and who knows what else)Any ideas -- I've searched high and low. Are there new kernel parametersI have to be aware of when I do a "make oldconfig", and go from there?
View 4 Replies View RelatedI just wanted to check, I'm using nouveau on Fedora 12 with the latest updates and each time I wake the machine from suspend, the fan on my XFX 8800GT goes to full speed and stays there. I've read some nouveau stuff and they say that nouveau doesn't control the fan speed, so I think the card is running in a safety mode after wake up where it runs the fan at full speed to be safe. The only suggestion I saw for fan speed and nouveau was to use nvclock to manually adjust the fan but that sounds dangerous to me. I think I'll just go to the closed rpmfusion driver then if this is the case.
View 3 Replies View RelatedI have FC 12 install on a Compaq nx9600 that comes with a Broadcom BMC4306 wireless card. I'm not sure what my kernel is, but I have all of the updates for FC 12.Whenever my laptop resumes from Hibernation/Suspend my Enable Wireless check box in the Network Manager is greyed out and it will not come back till I reboot the computer. Is there any one out there that can help with this problem, as I do not want to disable my Hibernation/Suspend as I tend to forget to turn the laptop off for a few days on end, and this beast sucks a lot of power so it is a drain on my power bill.
View 2 Replies View RelatedIs anyone else having trouble with waking up from suspend mode? After bringing the computer (Dell Studio 1555) back from suspend mode, GNOME moves very slowly. Cursor is unresponsive for significant amounts of time - any open windows do not respond to selection... Effects don't usually go away until a reboot is performed. This evening, one such restart resulted in a crash, where the shutdown process locked at the attempt to shut down the mouse/pointer module..
View 3 Replies View RelatedRecently I've been working intensively in my laptop (F12 x86_64) and so I usually only suspend it when I move between home and school, so I can continue working exactly where I left.
Alongside with a problem (now irrelevant given the context) of sluggish video performance after resuming from suspend (addressed in another thread), I've found another annoying problem involving sound (it embarrassed me in the library): after suspend I can no longer use headphones! Sure, I can have them on, but the laptop speakers play as well!
I tried several things in alsamixer and the only option was to entirely shut the volume down.
Of course I would hate to reboot the machine, besides I imagine it is a matter of restarting some service.
Is there a fix or at least a workaround for this sound issue without rebooting the machine?
Is it possible in Fedora to suspend from the command line as a non-root user?
View 9 Replies View RelatedI have a HP laptop with an internal tv-tuner card, which i use once in a while, because i don't have a tv. The problem is, that the kernel module i installed to make this piece of hardware work, for some reason makes my laptop unable to sleep. So if i want to suspend my pc, i have to first unload the module, using
[code]...
I just installed new Fedora (F15) and I could not figure out how to suspend or hibernate from command line as user. The method I used in previous versions does not seem to work:
Code:
What is new method of command line suspending and hibernating as user?
Suspend / hibernate locks up my system.
View 4 Replies View RelatedI am having a problem with suspend in F15. While the computer enters and resumes from suspend extremely fast (basically instantaneous), the whole system seems sluggish and unresponsive afterwards. The mouse cursor is lagging and some key strokes are omitted when typing. The animations in Gnome 3 are also very non-fluid compared to how they were before suspend. The only way I have found to return to normal operation is to reboot the computer. I have tried 32 and 64-bit versions of Fedora 15 with the problem existing in both. I also tried the latest version of openSuse (Gnome 2.32) just to see if this problem persisted and I can confirm that it did. Perhaps this indicates a kernel-related problem that should be reported as a bug somewhere else?
lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) .....
I just performed a clean install on a desktop (older IBEX model) that is connected directly to a Cicso router; this is a DSL service. I configured the Network during the install, and all went well, the installation script downloaded many software modules, I was able to set up my mail accounts, etc. Now, if I suspend this machine and log back on I notice that I am no longer connected to the Network. Clicking on the Network icon brings up the configuration pane, and the original network appears to be there, but I cannot figure out how to make it reconnect without rebooting.
View 3 Replies View RelatedI'm running 2.6.35.14-95.fc14.i686 on Gnome 2.32.0. I've been trying to assign a keyboard shortcut to Suspend the system when activated, but it doesn't work because to suspend the system you need to be root. The command I've been using for the shortcut is terminal "pm-suspend".I don't wanna set up the working user as root. Is there any way to get around the root authentication while suspend to make the shortcut work?
View 4 Replies View RelatedI have fedora 13. What is the difference between suspend and resume? If I suspend, how do I turn on the pc? If I hibernate, how do I get out of hibernation?
View 3 Replies View Related