Fedora Networking :: Wireless Dead After Suspend
Jan 4, 2010
I have FC 12 install on a Compaq nx9600 that comes with a Broadcom BMC4306 wireless card. I'm not sure what my kernel is, but I have all of the updates for FC 12.Whenever my laptop resumes from Hibernation/Suspend my Enable Wireless check box in the Network Manager is greyed out and it will not come back till I reboot the computer. Is there any one out there that can help with this problem, as I do not want to disable my Hibernation/Suspend as I tend to forget to turn the laptop off for a few days on end, and this beast sucks a lot of power so it is a drain on my power bill.
View 2 Replies
ADVERTISEMENT
May 15, 2010
I am in need of some help trying to get my wireless working. I have a compaq presario f557us and my wireless card just seems to be dead. I got this laptop a few years ago and I tried installing ubuntu 7.04. The wireless part did not work out of the box (it took a lot of tinkering but finally got it working by using ndiswrapper). Later I did an OS reinstall but tried ubuntu 8.10 this time and the card was recognized with no problems, I just needed to use the proprietary drivers that ubuntu recommended. Finally I decided to give 10.04 a try. I don't know if doing an "apt-get upgrade" would've been fine but it's too late for that now; I did a fresh install and the wireless part seems dead.
I already tried installing ndiswrapper as I did before:
$ ndiswrapper -l
bcmwl5 : driver installed
later I tried the fwcutter way:
$ bcm43xx-fwcutter -i bcmwl5.sys
Sorry, the input file is either wrong or not supported by fwcutter. I can't find the MD5sum b89bcf0a25aeb3b47030ac83287f894a
[Code]...
View 3 Replies
View Related
Jun 21, 2010
It looks like my laptop's wireless chipset (Broadcom) has/is dying. It won't work anymore on my Lucid install whereas it was working perfectly. The warrenty is long expired.
lspci brings up nothing about it anymore, it once did.
I booted my laptop into Win7 and it no longer finds it either. The manual slider switch on my HP Pavillion dv6000 is in the on position but the light is yellow.
It will very rarely work on Win7 now.
I can't afford a new laptop just now so it looks like I need an external wireless adaptor. I have (open busses) USB, cardbus/54, and a small firewire port. It does not pcmcia or other busses.
Any particular chipsets to look for or avoid?
View 4 Replies
View Related
Mar 22, 2010
I just installed (dual-boot with Vista) Ubuntu 9.10 in my Toshiba Satellite M300. The problem is that (when using Ubuntu 9.10), its network is dead, both wireless and wired. The LEDs of the LAN port don't even blink. My wifi is not also detected. Both of my wifi device and LAN port are functional when using Vista.
View 1 Replies
View Related
Feb 6, 2010
I'm not getting a response over on the Ubuntu WIreless Forum (which looks like it's getting slammed with questions), and weigh in on whether or not you believe I have a hardware failure on my hands? As I state in the post, I ran fine from the original installed version, 8.10, through 2 upgrades (to 9.04 and 9.10). Now none of them work (When the problems began I re-installed each of them in turn in order to test).
View 2 Replies
View Related
Oct 19, 2010
System: hp pavilion dv7 running ubuntu 10.04
Today my laptop battery died and after i plugged it in and restarted it said that networking was not enabled. hitting the networking key didn't re-enable it. i right clicked the wireless icon in the tray and clicked "enable networking" and it enabled it but no networks showed up as available and the networking status light on my keyboard stayed red. I've restarted the computer several times to no avail. anyone know what i need to do?
View 2 Replies
View Related
Jun 17, 2010
After upgrade from Hardy to Lucid, wireless card (Atheros Communications Inc. AR5212 ) was extremely slow and not really functional. I installed the madwifi driver following the instructions from Ubuntu Wiki and wireless works now. But, after suspend Network Manager nor Wicd could scan for any wirelss networks.
I found a workaround: in console, run "dhclient" and, magically, while the scan for Ip address is going on, suddenly also Network Manager starts connecting to my default access point!
View 2 Replies
View Related
Feb 13, 2011
I've got a Dell Latitude 131L with Broadcom B4311, running Ubuntu 10.04. Wireless networking generally works just fine, but I lose my connection when the computer is suspended, and I have to reconnect manually from the drop down menu.
View 1 Replies
View Related
Jun 8, 2011
I cannot see any wireless networks after waking the computer from suspend. Wireless works fine on boot. I've tried restarting the network service, but I still don't see any available wireless networks.
[code]...
View 4 Replies
View Related
Dec 30, 2010
I recently installed Ubuntu 10.04.1 LTS and have it set to dual-boot with windows 7 on my gateway tablet PC. Since installing, sometimes when I suspend or reboot, my wireless does not work. To be more clear - it is working fine, then I either suspend/reboot, then I come back and no wireless networks show up at all. I can still connect with ethernet cable though. I can solve it by rebooting multiple times (usually around 1-5 times) and then it (magically) seems to work again. I have also tried switching from network-manager to wicd, but the problem persists. With both network-manager and wicd, I've tried simulating a reboot for the wireless by using the command 'sudo modprobe -r iwl3945 && sudo modprobe iwl3945' (network-manager) and 'sudo /etc/init.d/wicd restart' (wicd), but these do not seem to work.
View 9 Replies
View Related
Feb 8, 2009
I've got a problem with samba and the nmb service. My system boots in Gnome
Ive set up Samba and it works ok, untill I reboot, then I have to go into services and restart Nmb service. the services bit says its dead after a reboot, its running on run levels 2345 I had a few hicups setting it up took me a couple of days to figure out the fire wall and SElinus were blocking things, so I ticked all the samba things - and it works a whole lot better.
I have to admit its a whole lot more polished than last time I tried linux - Red Hat 5. I like the Yum installer it takes a lot of guess work out for us novices, one thing I would like is to be able to edit and open things as root in Gnome or just log into it as root so that you can set things up, but I'll save that question for another day.
View 5 Replies
View Related
Aug 26, 2010
A few months back, my Lenovo IdeaPad Y510 stopped connecting to my wireless network after coming out of Suspend (it had worked fine previously). Wireless networking is simply disabled, and I have to reboot in order to get it back. I tried upgrading my OS from Intrepid all the way to Lucid, but the problem persisted. I also tried changing my 00sleep_module as suggested in this thread, but to no avail.
[Code]...
View 4 Replies
View Related
May 6, 2011
I've been happily using this lappie with LTS but wanted to try out 11.04. It looks great but wireless has been an issue:
1. No wireless during install
2. Had to manually blacklist the rt2860pci etc modules
3. Wireless still not resuming after suspend
05:00.0 Network controller: Ralink corp. RT2860
Subsystem: Ralink corp. Device 2790
Physical Slot: 0-2
Flags: bus master, fast devsel, latency 0, IRQ 18
[code]...
The latter manual mod improved things slightly but still no cigar
View 7 Replies
View Related
Jul 17, 2010
I have three problems with my new Acer Aspire one 721 (Amd, ATI) [url]
1) Pymouth doesn't work when booting. I have to use the parameter "nodeset". Desktop effects are working. I have installed Mesa based DRI drivers (experimental).
2) I have to manually "enable wireles" to acess the wlan. It should connect automatically.
3) the laptop doesn't wake up from suspend/hibernate. I have to use brute force to restart. pm-suspend.log
Code:
View 1 Replies
View Related
May 19, 2010
I have tried Lucid on two computers. Wireless mouse and keyboard are DEAD. Even the server version (before the desktop is installed) ignores them. If I connect a wired mouse or keyboard they both work fine.
View 2 Replies
View Related
Jul 3, 2011
I just performed a clean install on a desktop (older IBEX model) that is connected directly to a Cicso router; this is a DSL service. I configured the Network during the install, and all went well, the installation script downloaded many software modules, I was able to set up my mail accounts, etc. Now, if I suspend this machine and log back on I notice that I am no longer connected to the Network. Clicking on the Network icon brings up the configuration pane, and the original network appears to be there, but I cannot figure out how to make it reconnect without rebooting.
View 3 Replies
View Related
Apr 27, 2011
I use KnetworkManager for wireless. Works great except that if laptopgoes into suspend the wireless does not work after resume anymore.NetworkManager log
Apr 27 20:24:42 linux-nfii NetworkManager[1433]: <info> (wlan0): device state change: 7 -> 8 (reason 0)
Apr 27 20:24:42 linux-nfii NetworkManager[1433]: <info> Policy set 'Morran' (wlan0) as
[code]....
View 9 Replies
View Related
Jul 5, 2010
On my Sid laptop with iwlagn as the wireless driver, I use gnome with network manager. I lost all wireless capability when laptop failed to come out of suspend.
I have the power manager set up to suspend when the lid is closed. This morning when I opened the lid I got a blank screen with a blinking cursor. Without thinking, I forced shutdown with the power button. I know, don't say it. When I booted up I had no wireless at all. lspci doesn't recognize wlan0 lsmod shows iwlagn is still there I performed the following:
# modprobe -r iwlagn
# modprobe iwlagn
Now I have two drives on this laptop and Squeeze is on the other drive. When I boot into squeeze I have wireless activated.
View 3 Replies
View Related
Mar 27, 2011
I had 10.04 working 100%, than upgraded to 10.10 and now my nic does not work but my wireless does?
My nic is a Marvell Yukon 88E8042 pci-E fast.
ps: this is only on DHCP, haven't tried Static yet
View 1 Replies
View Related
May 22, 2010
I have the Dell Latitude D400 with the B4306 PCI card. I followed the instructions in the stickies on this forum and downloaded and installed the firmware. Still could not get the wifi card to work. Here is the read-out:
[Code]....
I am just beginning with Linux - please take pity on me.
View 1 Replies
View Related
Jun 17, 2010
I was connected to my intranet website using webmin. I was getting a message that the hostname cannot be resolved. I went into the /etc/hosts file and change the following:
127.0.0.1 localhost intranet.lab.net 192.168.50.100 intranet.lab.net
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
[Code]...
View 1 Replies
View Related
Feb 8, 2011
I hate kernel upgrades, at least on my laptop. Every time I upgrade, I have to recompile the driver for my Linksys WUSB600N adapter or it doesn't work. Usually, this is no problem, as I have the driver saved in a .tar file and all I have to do is 'make' and 'make install' and it works. BUT... This time, I tried that, and I get this:
Code:
doug@dh-laptop:~/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2$ make
make -C tools
make[1]: Entering directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools/bin2h
[Code]....
View 3 Replies
View Related
May 1, 2009
I have set up a small Mesh Wireless Hotspot at a local Flea Market. My plan is to add in one of those HotSpot services for billing and such..ut until I have enough users to justify that expenditure, I am just going to manually set up accounts.The system is all up and running as an OPEN SYSTEM. Users are able to access the net just fine thru my existing setup.My question is, how can I create user accounts so that users of my wireless network will have a username and password that they can log in with
View 11 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Jan 16, 2009
I have enabled desktop effects in KDE on Fedora 10.
I clicked "everything is OK", and accepted the settings and then everything went black ...
Then I have restarted X, logged again, still nothin' ... all black .... windows and action is present, but I can't see anything ...
How can I recover this ? I am using gnome now, ...
View 5 Replies
View Related
Feb 15, 2010
My part time hobby PC, running FC12, has started misbehaving following some recent updates. I hadn't booted the machine for about 10 days. It booted OK, I checked for updates, applied them, and then my problems started.When I boot now I get LONG delays after logging in and eventually will get the following error:
Could not display "x-nautilus-desktop:///".
Error DBus error.org.freedesktop.DBus.Error.NoReply:
Did not receive a reply, etc, etc...Have tried re-installing Nautilus, same problem. Being a relative Linux (though not Unix) newbie, what is Nautilus? Do I need it? Can I just get rid of it? Is there an alternative I can install that does work?
View 5 Replies
View Related
Jul 4, 2010
I know that this topic has been posted, responded to, and maybe even resolved, many times here, but I am stuck here with partially dead fileserver and need some pointers.
Problem: one disk drive that was part of a logical volume died. I have a replacement, but I can't get it into the LV and get the LV back up again.
pvcreate --uuid <uuid of dead drive> /dev/sdX1, where /dev/sdX1 is the newly created drive and its partition.
vgcfgrestore VolGroup
vgscan VolGroup
vgchange -ay VolGroup
e2fsck /dev/mapper/VolGroup-LogVol
but, e2fsck can't find a superblock. Apparently this drive is the first in the LV sequence, and it is not formatted as part of the LV.
So how to I get this new disk formatted into the LV without reformatting the entire LV and losing what data I still have?
(FWIW: this is on F11)
View 2 Replies
View Related
Sep 26, 2010
Quote:
When I look the Services panel, nxserver is listed but shows as "Service is Dead". Does this mean anything specifically? Could it be related to firewall or security issues? Right above it a related program to nxserver, nxsensor, is listed and it's shown as operational.
Same thing here in my Services panel. Just getting into using NX...the display seems near Win RDP quality over the home lan. I'm now trying to get the sound to work. What is this 'dummy output' in my Sound preferences and where did my sound cards go? I have one onboard sc and a PCI card, neither recognized via the NX client session. Looking to get ESD going which might be the issue.
View 3 Replies
View Related
