Fedora :: Can't Add Second IP Address For Network Card / Fix It?
May 25, 2011
To add a new IP address for the network card in the fedora, the only thing I have to do is to copy the file ifcfg-eth0 which is under /etc/sysconfig/network-scripts/ to a new filename called ifcfg-eth0:1 and change the IP address and the DEVICE?
OK, what about other files as following code...
They will be changed automatically if i changed the file under the network-scripts or i have to change them manual?
Am I miss any thing else need to be done?
View 2 Replies
ADVERTISEMENT
Sep 8, 2010
I have a server with 2 network cards. eth0 is used for all traffic and everything is working fine on this side. Eth1 is used for traffic to and from 1 ip address.
Lets say the ip address of eth1 is 123.123.123.10 and its gateway is 123.123.123.1. I need to pass all traffic to 123.123.123.20 through eth1. What command would i use?
View 1 Replies
View Related
Jul 8, 2010
On our Home LAN, we have several different SuSE machines running. Now, I have run into a problem which I cannot solve myself. One of the computers (a 11.2) just doesn't receive any IPv6 lease from the main router. The router has radvd running and distributes addresses to the other computers just fine. The network card on the box ist a
[Code]...
View 1 Replies
View Related
Sep 2, 2010
I have a second network card in my ubuntu desktop that I have sharing my internet connection with a wireless router. I have set the router to a static ip address within the network cards range. But, every time I restart the computer, the network card uses a different ip address. One time it will be 10.42.43.1, the next time it will be 10.42.46.1, ect. This makes me have to hard reset my router every time it does this. How can I set the network card to use the same ip address all the time?
View 6 Replies
View Related
Jul 14, 2011
Making a script that changes the MAC-address on my network card when i download or upload X-amount of GB. I have been searching around on the web, but I haven't been able to find anything that does that.
View 3 Replies
View Related
Apr 21, 2011
how to get my wireless card Mac Address using command line? I am using F14
View 2 Replies
View Related
Mar 30, 2009
I have an auxillary laptop that I use with Fedora 9 on it. Up until now, I have been using wireless just fine with a an old Marvell card. A friend needed a wireless card, so I gave it to her because I had a spare Belkin card (PCMIA) with a RT2500 chipset. This chipset has been supported in Fedora for a long time, and it does it fact work but it will not obtain an IP address and disconnects from the Network Manager upon every attempt to connect.. I get an error that says "set bit rate" failed and I cannot get assigned an IP address from my router.
I do not use encryption. Nothing I have tried with sysconfig-network has had any affect.
iwlist scan finds the router just fine with a good signal, but will not connect.
View 1 Replies
View Related
Feb 9, 2011
I'm running Fedora 10 OS ( I need this older version for development reasons).
I have two newtork cards,
one on a 10.51.54.blah domian
and one on a 192.168.200.blah domain.
I need to set up another network connection to be on a 10.10.10.blah domain as I have to access a piece of hardware that has an address 10.10.10.10.
So I need to have all three address ranges available on my PC at all times
How do I do this??
View 1 Replies
View Related
May 25, 2010
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Dec 26, 2010
I have a laptop connected to the the net thru an adsl modem, when I switch off the laptop network interface,(thru system-config-network) the light of the laptop network card plugged in the router stays on ( green) where as in my pc, when i do the same thing , the light of my pc network card goes off in the modem
View 5 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
Apr 30, 2009
I have a HP Officejet 6310 as a network printer
How do I find the network address of the printer so I can install it?
View 6 Replies
View Related
Feb 12, 2009
I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
View 14 Replies
View Related
Mar 9, 2009
Someone just erased my HWADDR line from /etc/sysconfig/network-scripts/ifcfg-eth0. How can I obtain my original MAC address?
Code:
ifconfig eth0 does not work (it shows the wrong MAC address) since the HWADDR line from the file I mentioned above was erased. Also there is no ifcfg-eth0.bak backup configuration file.
View 2 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
May 14, 2010
I just want know, how two network card in one PC working on fedora. I want try setup router + firewall on my PC. And i need tutorial how is working
View 1 Replies
View Related
Aug 29, 2009
tell me how to activate my wired NIC permanently?Also, how do I disable the 'work offline' check box in Firefox.At present I am required to action both before accessing internet.
View 2 Replies
View Related
Apr 9, 2011
got a new MoBo today. dropped it in and powered it up to find no network connection. when I dig though network manager I find no network devices, same with "network configuration" lspci gives:
03:00.0 Ethernet contoller [0200]: Atheros Communication Device [1969:1083] (rev c0)
ifconfig gives just the "lo" device. is there a hardware detection step I'm missing? I should mention this is a swap of one onboard NIC for another.
View 6 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Jul 27, 2011
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
View 3 Replies
View Related
May 28, 2011
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
View 9 Replies
View Related
Jan 31, 2010
I've updated a desktop from 11.1 to 11.2 with the NET CD. After completion everything worked fine, though I have some issues with the NIC. been looking on the net and the provided solutions haven't been able to resolve the matter. After reboot I don't get an IP address, I go into Yast2 and network settings displays:
I have to delete the unknown device everytime after a reboot in order to get a new IP address. After that all works as it is suppsed to. I've been looking into the /etc/udev/rules.d/70-persistent-net.rules and deleted all that was in there,
View 6 Replies
View Related
Sep 8, 2010
I know that most people are using F12 and F13 but I just installed F10 on one of my machines. The Kernel is 2.6.27.5-117.fc10.i686 and the GUI is Gnome 2.24.1.I have a Trendnet wireless card already installed in the machine from when it ran XP which is in the tew-421pc/tew-423pi family. Is there a device manager/hardware installer that I can use to set up the wireless card or does anyone know of a driver install program for this card?
View 1 Replies
View Related
Jun 18, 2009
During the installation process, configure the network installation process requires, as a result of my wireless network card can not be drived, It is not possible to continue with the installation,please help me.
View 5 Replies
View Related
Jul 23, 2009
I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies
View Related
Dec 22, 2009
I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:
[Code]....
Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:
[Code]....
Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.
I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).
View 8 Replies
View Related
Mar 16, 2011
I have been trawling the web looking to see how to get my broadcom nic working on my Dell optiplex 380 with fedora 12. Basically it shows up when I run lspci but no where else, unfortunately I have no linux experience. Other things that I have tried were to check the blacklist driver file, which had no reference to the nic.
View 3 Replies
View Related
Jul 11, 2010
Here comes my problem: I am installing a new unit with Fedora Core 5,I will use it as my internet server. I need one additional PCI network card but it is not detected during installation.what shall I do?
View 5 Replies
View Related
Mar 7, 2009
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies
View Related