Fedora Networking :: No IP Address From DHCP Server On Wireless Network?

Feb 12, 2009

I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.

I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.

View 14 Replies


ADVERTISEMENT

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

Ubuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting

Dec 16, 2010

Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.

So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.

My files are as follows:

View 2 Replies View Related

Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address

Mar 25, 2010

I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response

openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.

The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0

I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?

View 2 Replies View Related

OpenSUSE Network :: Dhcp Client Does Not Receive The Dns Server Address

May 18, 2010

I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:

option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;

[code]...

(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.

View 5 Replies View Related

General :: Determine Whether Computer 'gets IP Address Information From Dhcp Server On Network'

Sep 24, 2010

First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?

View 2 Replies View Related

Networking :: Windows XP Network Can't Acquire DHCP Address From Debian Squeeze

Apr 18, 2011

I setup the dnsmasq in debian squeeze as dhcp and dns server, for the debian host i assigned the static ip addresses, and configured the xp for dhcp. Windows XP network can't acquire DHCP address from debian squeeze with this error:

Quote:

error unable to contact your dhcp server Request has timed out.

this is the tcpdump output in debian for the xp network:

Quote:

15:12:10.631635 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:12:42.631730 ARP, Request who-has 169.254.202.161 tell 169.254.202.161, length 4615:12:44.613568 ARP, Request who-has

[code]....

View 11 Replies View Related

Networking :: DHCP Server - Losing Static IP Address

Nov 10, 2010

I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254

This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.

View 8 Replies View Related

CentOS 5 Networking :: DGE-530T Will Not Get IP Address From DHCP Server

Aug 6, 2009

I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.

Here are the outputs for this card.
uname -rmi
2.6.18-92.1.10.el5 x86_64 x86_64
lspci -m
04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)"
lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')"
04:01.0 0200: 1186:4b01 (rev 11)
lspci -vv
04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data

How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.

View 2 Replies View Related

Fedora :: Get An IP Address From The Dhcp Server?

Apr 13, 2011

I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.

Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:

Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1

[Code].....

View 8 Replies View Related

Ubuntu Networking :: Make Server Accessible With A DHCP Address?

Nov 1, 2010

The cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.

Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?

View 1 Replies View Related

Networking :: Change MAC Address & Connect To A Dhcp Server Successfully

Dec 26, 2009

For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command

And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?

View 7 Replies View Related

Fedora Networking :: Get The Router To Assign An IP Address Through DHCP?

Jan 24, 2009

I noticed that my internet connection wasn't automatically brought up each time I logged into Fedora so I opened the system-config-network tool and edited my network adapter by checking the box marked "automatically start at boot/login." To my surprise, the connection went down and upon trying to click on the device to let the manager bring up the connection the greyed-out phrase "device not managed" appeared underneath the device name and wouldn't allow me to connect.

Even when I used ifconfig/dhclient to get the connection up nothing happened. I could get the router to assign an IP address through DHCP, pinged a few sites to make sure it was legit, but still couldn't use firefox to browse anything. Seems as if network manager GUI is conflicting with command line attempts to bring the network up. I'd like to permanently disable system-config-network if possible because it's acting screwy!

View 5 Replies View Related

Networking :: Get Connected To A Wireless Network That Only Allows DHCP?

Jan 16, 2009

I have a WET54g bridge that I am trying to get connected to a wireless network that only allows DHCP. The idea behind it is that I would like to connect the Cat6 out of the bridge to a switch allowing multiple wired computers to connect to the wireless network. The bridge will easily connect to the network once I put the WEP key in, however, there is a kink after that. When I connect the Cat6 to my computer and request an IP for that computer, it self assigns. This tells me that it is not talking to the wireless network through the bridge.

I can not find which IP address the bridge was assigned so that I can talk to it. The sub net is 255.255.240.0 which leaves quite a few possibilities. I know that the bridge is, however talking to the wireless network because the light is steady on the front of it which indicates just that. One other thing to stack on is that I know that there is a "splash page" which comes up when any computer connects. You click on the agreement and then you are allowed onto the network. How can I get my computer to talk through the bridge to the wireless network?

View 1 Replies View Related

Fedora Networking :: Commands To Switch From DHCP To Fixed IP Address?

Feb 20, 2009

When I install Fedora 10 on a new system, I let it default to DHCP. Later, I change the system to a fixed IP address by running system-config-network, selecting eth0, clicking on "Edit", clicking on "Statically set IP addresses:" and filling in the blanks. Is it possible to accomplish the same thing using commands that could be entered in a script? I assume one of them would be

Code:
ifconfig eth0 address XXX.XXX.XXX.XXX netmask 255.255.255.0

View 1 Replies View Related

Networking :: Enable DHCP Setting In Fedora 12 / Using Static Address?

Jan 2, 2011

My DHCP setting is disabled in fedora 12 . Previously i was using static IP address. I Want DHCP setting enable, any idea.

View 1 Replies View Related

Ubuntu Networking :: IP Address Set To Manual But Still Queries DHCP For Address

Mar 12, 2011

I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.

View 1 Replies View Related

OpenSUSE Network :: Can't Get IP Address From DHCP

Jun 3, 2010

I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.

View 5 Replies View Related

Server :: Allow Wireless Clients Access To Network Based On Their MAC Address?

Jan 11, 2011

Using CentOS 5.5, FreeRADIUS 2.1.7.

Objective is simply to be able to allow wireless clients access to my network based on their MAC address (I have about 10 WAPs around the country which I need to be able to manage user access centrally). Not interested in LDAP or dishing out keys/certificates etc.

I have been trying to follow the guide here. Sounds like it's exactly what I need but I'm not sure about a few things.

1) For each of the conf files am I supposed to be replacing everything currently existing in the respective file with what is suggested?

2) "raddb/modules/file" does not exist, so I assume I should use "raddb/modules/files"?

3) If I uncomment the line:

Code:
#rewrite_calling_station_id
under the "raddb/sites-available/default authorize{}" section, the radiusd startup gives me the following error:
/etc/raddb/sites-enabled/default[69]: Failed to find module "rewrite_calling_station_id".

If anyone familiar with FreeRADIUS 2 could answer these queries I might be on the right path

View 12 Replies View Related

OpenSUSE Network :: Having IP Address Via DHCP But No Connection?

Apr 9, 2010

I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference

View 2 Replies View Related

Networking :: Dhcp Server On Network Drive

Jan 15, 2010

On my network drive web control panel I have got such an option:What would a dhcp server do on a network hard disk?

View 5 Replies View Related

Ubuntu Networking :: Cannot Obtain IP Address On Wireless Network?

Feb 19, 2010

I believe I have the wireless card installed properly and wicd sees the router. When I try to connect I get an error "can not obtain IP address" Output from iwcongif and lspci is.

dillan@dillan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.

[code]....

View 9 Replies View Related

Ubuntu Networking :: Cannot Obtain Ip Address With A Particular Wireless Network?

Mar 5, 2010

I'm using Ubuntu 9.10 and I recently changed certain settings of my router. After that ubuntu isnt able to obtain IP address from this wifi network. I've tried to connect with win 7 and OS X and both of the OSes are able to connect to the same wifi network. I tried to connect ubuntu to another wifi network at school and it connected successfully.

View 7 Replies View Related

Networking :: Network Server (DHCP) - No Connectivity To Modem

May 4, 2010

Basically, I wanted to use the Bootp (PXE) protocol to boot a machine (my laptop) from my network instead of using USB/DVD boot medias to reinstall if need be. My router being a piece of crap, I couldn't setup the DHCP server to allow PXE packets. Confirmed from the manufacturer that it is not possible. Well for a $140 router, you would expect the opposite. Anyways, here I am with a small machine setup with Slack, no desktop environment (only CLI) and connected to my router (which I deactivated the DHCP) so the machine can act as a DHCP server. It works very well. However, I would like to install a few other utilities into that machine and for them to work, I need to put the machine between my cable modem and my router. Basically, here's the topology from outside):

Internet (ISP) --> Modem --> DHCP machine --> Router (no DHCP - acting as a switch) --> computers & printers

The problem is that I cannot connect to the modem from the computers on the network. Also I cannot access the internet (go on the WAN side) from the computers. From the computers (namely my laptop), I can ping the router, but cannot ping the interface where DHCP broadcast. Also I cannot ping the modem. From the router (using the web config page), I can ping the DHCP broadcast. From the DHCP machine, I can ping the modem. In the DHCP server, I setup the eth0 (the interface where the modem connect to) as a DHCP assigned IP so it can obtain the IP from the modem. The eth1 (the interface where DHCP broadcast) is static. All my machines obtains a IP from the DHCP machine without a hiccup.

View 13 Replies View Related

Ubuntu Networking :: Cannot Obtain IP Address From Wireless Network / Enable This?

Jan 17, 2010

I'm using Ubuntu 9.10 and for a while I had no problems connecting to the internet through the wireless network. But recently, my wireless connection started disconnecting regularly. Following an advice I found online, I installed linux-backports-modules-karmic, but after a reboot the wireless device stopped working altogether - it had lost its driver. Since then I managed to associate the device with Broadcom's STA driver, which I had been using before. But now, the wireless device cannot connect to the internet anymore. The network manager's output to /var/log/syslog indicates that the device cannot obtain an IP address. When I run code...

View 4 Replies View Related

OpenSUSE Network :: How In World Do I Configure SSH With DHCP Assigned Address

Aug 7, 2011

I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."

Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?

View 4 Replies View Related

OpenSUSE Network :: Unable To Acquire IP Address Over DHCP With Ipheth Driver In 11.4 X86_64?

Jun 14, 2011

Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black

View 2 Replies View Related

Ubuntu Networking :: Internet Connection Sharing In Network Manager / No DHCP Server

Oct 14, 2010

How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.

View 3 Replies View Related

Fedora Networking :: Network Manager DHCP

Jul 7, 2009

I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.

View 4 Replies View Related

Fedora :: Make 13 Box DHCP Server For Network - Cann't Find Dhcpd In YUM

Nov 10, 2010

I would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved