My Fedora 11 installation was a breeze but i have been experiencing crashes sometimes. the computer hangs and i have to do a hard reset.
Here is what /var/log/messages say before the crash:
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
I've recently tried installing Fedora 14 on a HP z600 workstation, but I'm running into major stability issues.
I can successfully boot fedora 14 from the live-cd and can perform basic tasks from the terminal and within gnome. However, I sometimes experience hard-crashes when I am browsing the web with firefox. In fact, I can pretty consistently cause this by downloading a relatively large file (~100MB) with firefox. Interestingly though, I don't experience any problems when doing the same with curl.
Furthermore, I run into the same issues when I install fedora 14. Worse, the system seems corrupted when it recovers after rebooting... sometimes failing to make it to the login screen.
I'm suspicious of the network driver, but also of the memory. I have performed the memory test included on the live-cd, but it reports no issues. This may be so, but from previous experience with computers, I don't trust memory tests to detect all memory issues.
Ubuntu is similarly problematic; vista appears fine, with limited testing.
*Hard-crash: system locks up for 5 or so seconds, followed by a black screen, and then reboots. There are no error messages displayed.
EDIT: As a point of reference, Fedora 11 seems to be a stable for me.
After some time (thirty second - a few minutes) computer hung (screen froze, I couldn't switch to console, only hard reset helped). From log message I suspected graphic card and I replaced it to some other based on PCI Express (GeForce 6200). It's better. Computer works fine during office work (OO, Firefox, ...), but after being a few minutes in 3D mode (e.g. game with graphics 3D) hangs in the same way.
The last messages in log are always code...
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies View RelatedI forgot my root password for mysql, and after some searching I found several solutions to fix it. But none of them seem to work.I tried this article http://ubuntu.flowconsult.at/en/mysq...root-password/ with starting mysql with the --skip-grant-tables option. The problem is that nothing happens, it just hangs.Also tried the the --init-file option, that one runs fine, at least it returned to the command line. But the sql query in the file to which it point doesnt seem to do anything. The password wasn't changed to the one I specified in the sql file.Any idea what could be going on here, and how I could fix it?
View 3 Replies View RelatedI'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware
View 1 Replies View RelatedI installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
So I run a dual-boot win7/ubuntu system and out of nowhere I am now unable to boot into ubuntu. I get up to the screen where I select which OS to boot into, then I select ubuntu, get the wubldr messages and then my computer instantly resets back to the original load screen.
This comes paired with a bad boot into my windows partition so I feel like they may be related. I did a system repair and now windows works though. I'm defraging my harddrive now just to see if it works.
I have Fedora running on my computer at school and have been informed we are getting new computers.
Can I simply move my hard drive to the new computers? I don't have to reinstall do I? Would I have to use a new kernel?
I have been having a problem with the computer I'm using were it keeps freezing (mouse works, however nothing else does). Usually to get out of it I have to use REISUB signal for a forced reboot. This only used to happen once in a while, but was still annoying. Tried a new video card, new motherboard... neither helped. Other Linux OS had the same issue, Windows XP works ok.Yesterday after running a full update it got worse (first since I installed OpenSuse 11.3 64 last weekend). It appears that Firefox will crash X completely. Rendering got slower and Compiz disabled (not a big deal). Opera also crashes and just by resizing a window or scrolling down on gedit also do the same. I found a few errors on my /var/log/messages log, looks like it's related to the driver that I'm using (noveau). I'm pretty good with Linux, but when it comes to X is the same as speaking another language to me! :-S
Code:
Aug 27 19:06:42 opensuse polkitd(authority=local): Registered Authentication Agent for session /org/freedesktop/ConsoleKit/Session3 (system bus name :1.72 [/usr/lib/polkit-gnome/polkit-gnome-
[code]...
I recently did a clean install of lucid lynx amd64 on my desktop computer.After a some days of usage i started experiencing crashes or hangs.Twice my computer crashed and rebooted immediately after.3-4 times my computer hanged as in while listening to an on-line radio station music began to loop and the computer become completely unresponsive.The Apps i was running at that time i think were firefox vlc jdownloader ...My question is: In the event that this isn't a hardware problem since windoz are fine, is there some logs i can post/look at or same other app that can help me resolve this?
View 9 Replies View RelatedWhen I start my computer sometimes I get an error that my floppy drive isn't working and the boot process is halted. So I disabled the floppy disk seek. But Once in a while (sometimes almost every time I start) the BIOS settings are reset and I have to disable floppy disk seek and reorder boot device list again. I have checked the battery and it's fine. What else can be the problem?
View 14 Replies View RelatedI'm somewhat a newbie at LVM and have encountered a real problem for me. During resize2fs after extending my LV i ended up with a crash. Now I'm worried I have lost all my old data. How can I proceed to get the volume in working order?
NoFear ~ # lvextend -L+400G /dev/vgftp/lvftp
Extending logical volume lvftp to 4.16 TiB
Logical volume lvftp successfully resized
NoFear ~ # umount /dev/vgftp/lvftp
NoFear ~ # resize2fs /dev/vgftp/lvftp
resize2fs 1.41.10 (10-Feb-2009)
Please run 'e2fsck -f /dev/vgftp/lvftp' first .....
NoFear ~ # e2fsck -f /dev/vgftp/lvftp
e2fsck 1.41.10 (10-Feb-2009)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/vgftp/lvftp: 308343/505479168 files (18.3% non-contiguous),
1006593162/1010942976 blocks
NoFear ~ # resize2fs /dev/vgftp/lvftp
resize2fs 1.41.10 (10-Feb-2009)
Resizing the filesystem on /dev/vgftp/lvftp to 1115800576 (4k) blocks.
** CRASH / HANG **
25hours waiting and nothing happens. No disk I/O going on or anything. I have no backups or anything of this volume. What can I do do revert the process to get the disks back? I have not done anything at all after the crash/hang in fear of destroying something.
I'm facing a big problem with a corrupted disk on my wife's computer after she hard resetted the box after it froze up solid.Upon restarting it dropped into Busybox reporting something like
Quote:No init found. Try passing init= boot arg BusyBox v1.10.2 (Ubuntu 1:1.10.2.2ubuntu7) built-in shell (ash) (initramfs) ...This is VERY similar to a problem I had just a few weeks back with my own computer - see this thread for details of that. From that problem I learnt a lot, so I thought this would be quite straight forward, but I've ran into problems.The first thing I did was get a live disk, I chose Ubuntu Rescue Remix. It's a command line interface, which I am ok with, but I can't copy/paste the outputs here....so I am currently downloading System Rescue CD.sda1 is the root partition, it is corrupted. I used dd to make a back up of that by mounting sda7, and dding the whole partition image into /mnt/sda7/sda1.img .This seemed to complete properly, but, when I ran e2fsck on that img file, it wouldn't complete, throwing up a lot of errors.
Code:
ubuntu@ubuntu:/mnt/sda7temp$ sudo e2fsck sda1.img e2fsck 1.41.12 (17-May-2010)
Error reading block 2129920 (Invalid argument). Ignore error<y>? yes
Force rewrite<y>? yes[code]....[code]....
When I download and boot into System Rescue CD, I'll be able to run some more tests, in the mean time,I really want to save this disk otherwise my wife will be back on Windows permanently.
I have been plagued by problems with KMail. Sometimes Akonadi server fails to start:
Code:
[
0: akonadiserver(_Z11akBacktracev+0x39) [0x40c5d9]
[code]....
I upgraded my laptop from 10.10 to 11.04 yesterday. On the reboot part of the installation and on all subsequent boots, the loader gets as far as the initial Ubuntu splash screen before switching to verbose mode and dying in interesting ways.
If I boot using wireless, the display flashes six times, then sometimes hangs around before reporting: iwlagn 0000:08:00.0: Aggregation not enabled for tid 0 because load = 4 (this number can be anything from 0 to 10)
If I boot using a network connection, I get the same splash screen and six flashes before the system hands, usually at the message: Stopping userspace bootslash [OK]
I am not keen on reinstalling from CD except as a last resort as I have a number of files that I do not want wiped.
Under 9.10, my laptop frequently freezes up and has to be hard-reset. At first I thought it was a Firefox issue because it happens most often when I'm on the web, but the computer also crashed on me while doing things in Synaptic, so it must be something else. I have an HP Pavilion z5000 with an Ati Radeon 9600 Mobility, 1.25 GB of RAM and 120 GB hard drive.
View 6 Replies View RelatedI've currently got 9.10 and have (somehow) managed to mess the system up already!It's a new computer so I'm not fussed about data loss etc, but is there a way to completely reset the system which will also format the hard drive (as it was a download that has messed it up!) without losing the O/S?
View 9 Replies View RelatedI feel a little awkward in this Control Panel: first time user. I installed the latest version of Ubuntu yesterday. All went smooth until I got to installing printer drivers. The setup went online and my system froze...everything froze. I had to do a hard reset. The printer installation went smooth the second time. So far this is the only problem I've had. No details needed. What I was wondering is if there's any way to check if the hard reset did any damage.
View 3 Replies View RelatedI currently have a problem where when xubuntu is restarted using the power button, it will prompt the user with grub asking which selection to boot (xubuntu recovery or xubuntu) this feature itself is fine, but for some reason there is no timer, which means that unless you hit enter, it will always be stuck on the GRUB selection screen. I am wondering if there is any way to change this, is there anyway to enter a timer into the system so no matter what, after x seconds it will boot xubuntu?
View 1 Replies View Related[URL]
Basically, when I do a reboot or shutdown and then the system tries to start I get a blank screen thus I have to hit the reset button and then I'm showed a grub menu (not sure why I have it set to autoboot) and then I can boot properly.
It seems that the updgrade that I made in my ubuntu 9.10 to 10.04 turned to be a downgrade... I am having some glitches here!
First, started off that I couldn't turn off or reset my computer using the power buttons, it simply logs out.
I found a similar problem in a thread and I got this solution:
Code:
Then I forced it to shut off with the command: sudo poweroff
When I turned it on again my icons like Trash bin, Netowrk meter, Keyboard layout have disappeared from my panels...
And it doesn't shut off anymore (it did for a couple times only).
I am experiencing frequent crashes for my browsers (FireFox, Opera, Konquerer). It doesn't seem to be related to the amount of tabs I have open, sometimes it will crash on 1 tab, and sometimes it is fine to have 20 tabs up. In addition to this, some flash videos hang after 3 secs.
PC spec:
OS: SuSE 11.2 (x86_64)
GUI : XFCE (KDE 4.0 back up)
Intel Q6600, 2GB Ram DDR2, 9800GX2
I've been using Ubuntu for quite a while, several years, though several upgrades. Experimented with various things, uninstalled some and various other messy activities. Some things don't work as well as they used to. Sometimes my system crashes, or hangs for a while before coming back. I still get a KDE screen when I shut down, though I attempted to uninstal that desktop. I would like to start over, that is with as little trouble possible to reinstall from scratch. Have to save my user directories, also the directories for my LAMP applications.
View 8 Replies View RelatedI have "successfully" installed both LinuxMint 9 "Isadora" and Ubuntu 10.04 on it, and found I have the same problem with each. That is, I am able to:
1. startup to the live CD
2. format the hd to be all Linux
3. startup the computer from the HD into Linux
Then, I get these problems, in both distributions
4. Monitor hangs on the desktop background for an immensely long time (maybe 30 minutes?) with no cursor or menu bar or status bar or anything
5. Eventually, I get a desktop that I would expect and I have an option to do things like update, customize etc. however at this point, the cursor is invisibile. I am able to navigate and get around by guessing (menubar elements highlight when being hovered over)
6. After about a half an hour in an operable mode (I have tested network connections, played videos and music from external HD media stores, you name it.) the monitor will mysteriously crash.
Clarification:
#4: nothing I do while the dekstop background is featureless, meaning any key on the keyboard or any normal key combination, including all the F keys, ctrl-F keys, ctrl-alt-delete or ctrl-alt-escape or alt-opt-delete or alt-option-escape etc. Nothing does anything. It is utterly unresponsive.
#6 What I mean by "mysteriously crash"? the monitor goes black and then the top half starts displaying what looks like a super-zoomed in bar code. The only way out of this is to force the computer to restart.
Since this happens in both the linux distributions, I'm at a loss to figure what's causing it.
I am using a Compaq FS7600 17 inch CRT monitor with this Dell Dimension 2400.
I'm running Jessie 64bit, and after installing the latest image and fully updating it, I get screen freezes using gnome, most oftenly when i press the start button to access gnome app grid. System becomes unusable and I have to hard reset. Just in case, I installed linux firmware from nonfree repos, but the issue persists. I don't use any exotic hardware:
Code: Select all00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
[Code] ....
I'd say it's related to graphics, but I don't know how to get around it...
I'm new to Linux, tried Ubuntu, had slow boot problems, tried openSUSE 11.1, still have slow boot problems. The issue seems to be that the ata.0 device is slow to respond (ERROR= -16), the boot system forces a hard reset, then a soft reset, configures for UDMA 133, says the drive is ready, then does it again, three times, and then configures the drive for UDMA 100. It's a brand new Western Digital Caviar drive, and windowsXP likes it just fine. Once SUSE boots, everything seems to work just fine. I thought the problem might be with the drive jumpers, so I reset them from cable detect to master/single. No change in the problem.
View 9 Replies View RelatedFirst of all, i'll just say this myself. I'm a dumbass and tried to fix somethings that wasn't even a problem from the start and now my 9.10 installation is totally fubar. There, done, now let's move on.
Ok, so I tried to delete a folder after compiling two binaries to the wrong folder and used the
Code:
rm -r
command on what I thought was the folder /home/lars/bin. And to add to the dumbass-ering, I was root while doing this. The computer hangs and leaves me with no other options than doing a hard-reset via power-button.
After rebooting I can't even see the login screen, it just hangs at the Ubuntu symbol.
So I give the recovery mode option in my grub menu a try and it gives me a bunch of lines, all looking good until I get this and the boot just stops with a blinking underscore. code...
Should I just beat myself for a while and then reinstall the OS or what...?
The hardware involved is a Asus EEEpc 1000h.
ps. I'm new to Linux and have so-far managed to get around by following guides and tips, just a heads-up.