Fedora Hardware :: Computer Hangs In 3D Mode With Hot-plug Warning (not GPU Overheating) / Sort It?
Dec 29, 2010
After some time (thirty second - a few minutes) computer hung (screen froze, I couldn't switch to console, only hard reset helped). From log message I suspected graphic card and I replaced it to some other based on PCI Express (GeForce 6200). It's better. Computer works fine during office work (OO, Firefox, ...), but after being a few minutes in 3D mode (e.g. game with graphics 3D) hangs in the same way.
The last messages in log are always code...
View 2 Replies
ADVERTISEMENT
Aug 3, 2009
Upon installing Fedora on my Samsung NC10, I loved it. It feels stable and isn't cluttered with pointless apps. However I was immediately greeted by Palimsest Disk Utility warning me that the 'reallocated sector count' on my hard drive is going bad. I'm not too sure what any of it means but here's the statistics;
ID: 5
Attribute: Reallocated Sector Count
Current: 100
Worst: 100
Threshold: 10
Value: 1 sector
Status: failing
type: pre-fail
status: updates
It also says the temperature is 46 degrees yet the netbook's taken to being very, very hot around the touchpad and under the hard drive.
View 6 Replies
View Related
Jun 18, 2011
I have noticed that the Acer Travelmate '10.04 netbook', is heating up while bringing it out of suspended mode,that's when it does'nt decide to turn off the whole machine instead. Should 'nt it be asleep?.. I would use hibernate but that surely does'nt come back on. I stopped trying so I used suspend instead. but the temp must be around 48� .I removed a usb mouse that fed off the power supply and still left a usb in ,but that shouldnt prevent it from goin to bed ,right?..Windoze doe'nt like it ,emm does't do it , Not notsleep ...
View 4 Replies
View Related
May 6, 2010
My computer made it to the "Cleaning up" phase, and then overheated. Any ideas on how I might finish the process manually?
View 1 Replies
View Related
Feb 26, 2011
With windows I was able to leave my computer on my lap and go for hours on end its never overheated on me and it still doesn't with windows, but with ubuntu it will last around 30-1h then it will overheat or even faster if I do anything like play a game or watch flash. And its not a problem with the new flash release because last year when I had ubuntu 10.04 it did the same thing (im on 10.10)
View 9 Replies
View Related
Aug 24, 2011
I am installing Fedora 15 as a guest machine on virtual box. the installation completes fine, but it gets hanged on the date and time screen during first boot. Even on clicking "Forward" button it doesn't work and just gets stuck there.
I am using windows 7 as the host machine and I have given 1 GB ram and 8 GB hard disk to guest fedora OS.
Before the installation, I checked the media also it was shown to be correct. The media I am using is virtual clone drive for DVD ISO image. VirtualBox version 4.1.2 was used.
View 7 Replies
View Related
Dec 9, 2009
I've been using linux for a long time, and I just ran into a problem that has me stumped. Any time I mistype a command, it says "Command not found."... yea, I know that's normal. But it doesn't return me to my # prompt. I have to press Ctrl+C to get back. code...
I know I do have one issue with this computer, I have 2 blown caps on my motherboard. This was a dual boot system, but after a virus with winblows, I decided to switch it to strictly linux. (roommates... *grumble*) I think I was running fc10 before I wiped the hd & installed fc12. Fc12 does seem to be running slower, and I still haven't got my sound card working properly... but that issue is for another topic...
-YungBlood Reborn
View 2 Replies
View Related
Feb 14, 2009
Need your suggestion for below issue :
Operating System : LINUX RED HAT 9.
Problem :
The OS reboots normally.
and monitor stay on upto before getting into graphical logging window.
Once it try to get into graphical logging mode, the monitor keeps on and off
I can access Linux Box remotely. The server is fine.
I cannot get into logging prompt locally.
It was working fine before.. I am not sure if I have made any changes.
How can I reset to default settings so I can get to logging mode locally.
Having turing power off on Bios will that help ?
View 2 Replies
View Related
Mar 31, 2010
Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
View 9 Replies
View Related
May 31, 2011
I try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen
Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2
View 9 Replies
View Related
Jul 8, 2009
I have a Dell Optiplex 760 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
running:
I tried to upgrade to FC11 via download and DVD and in both cases the install hangs on bootstrap right after remounting the root filesystem in read/write mode.
Since it hangs in this manner, I have not been able to gather any logs...
View 5 Replies
View Related
Aug 11, 2009
My Fedora 11 installation was a breeze but i have been experiencing crashes sometimes. the computer hangs and i have to do a hard reset.
Here is what /var/log/messages say before the crash:
View 5 Replies
View Related
May 26, 2011
Gnome would sleep after specified 10 min and put this machine into <1 Wt saving mode.KDE just invokes screensaver and turns off display. It won't even spin down HDDs.There are no profiles in KDE power settings and I can't create any - create button works, but 'new profile' dialogue does not actually create any profiles.This is a brand new default install of F14 on AMD 890 chipset.
View 1 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Feb 21, 2010
I made some hardware upgrades today: installed a new video card, a new CPU cooler, and a DVD burner. Everything seemed fine, but every 10-15 minutes the computer just freezes. Freeze is actually the wrong word since I can still move the mouse's cursor, but it has no effect. Keyboard input is useless and I just have to reboot. On the 3rd reboot fsck checked the root partition and made some changes.
I have checked system/CPU temperature to see if maybe the cooler wasn't working right and checked it's mounts. Everything there is great.
The system hangs whether I'm using the burner or not. (It's an ASUS)
The hangs seem to happen when scrolling a window or changing desktops, but I'm constantly doing something to that effect so it's hard to say if that's the cause.
The card is GALAXY Geforce 240GT. I've never used a Galaxy card so I'm leaning towards that, and have gone back to the old Geforce 9400 in the meantime, but while I'm waiting to see what happens, I was wondering if maybe the filesystem getting modded in the fsck check might point to a filesystem error causing the hangs, or if it seemed more likely that the filesystem was corrupted by the hangs.
View 4 Replies
View Related
Jan 3, 2011
I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.
Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is 2.6.35.10-74.fc14.x86_64 and my graphic card worked fine with hardware acceleration out of the box.
[Code]...
View 4 Replies
View Related
Mar 23, 2010
what these information mean?What should I do to fix this?
(npviewer.bin:6947): Gdk-WARNING **: XID collision, trouble ahead
Shutting down nautilus-open-terminal extension
--- Hash table keys for warning below:
[code]....
View 1 Replies
View Related
Feb 10, 2010
When I browse the web and download files, the wireless network connection now and then seem to take a pause of several seconds before recovering. Is this a know issue? Doesn't seem to affect Piding, only my browser and my apt-get upgrades.
View 1 Replies
View Related
Aug 15, 2010
I use an IBM Thinkpad T30 with an ATI Radeon Mobility 7500 graphics card as my work machine, mostly at a desk, using a docking station to link it into a monitor. I upgraded to Lucid last weekend. When using the integral screen on the laptop the graphics have been fine, but when using a monitor I initially got some very poor contrast, brightness and gamma output, described in this bug.
https://bugs.launchpad.net/ubuntu/lu...ux/+bug/548709
According to the advice in that bug report, I upgraded the kernel, with Kernelcheck automatically updating me to 2.6.35-candela. Now, rather than poor graphics with the monitor it just hangs on the splash screen, displaying the words Ubuntu with the dots underneath.
Reading around, when similar problems have been seen in previous versions of Ubuntu it has been a graphics issue, which fits. One piece of advice I've seen quite commonly is to remove the "quiet splash" from grub, which I've tried but doesn't work. I am tempted to try and work through the different grub commands these guys used to tackle a similar problem with the live CD:
http://ubuntuforums.org/showthread.php?t=1472054
But am a bit reticent as I don't know what they all do.
As an aside, the 2.6.35-candela kernel brings up a bunch of errors on boot, described at the link below, but reading that thread they don't look like they would cause my problem:
http://kerneltrap.org/mailarchive/li...4591800/thread
View 1 Replies
View Related
Sep 12, 2009
I'm attempting to install CentOS 5.2 x86_64, on an HP Pavilion/Intel Core Duo.
The DVD boots, anaconda starts, displays blue screen with "Loading usb-storage driver", and then hangs at a blue screen of garbage.
View 6 Replies
View Related
Oct 24, 2010
Im trying to install proftpd on my debian server but i get this error
ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode.
View 1 Replies
View Related
Jun 16, 2010
When installing Ubuntu Server 9.10 (onto a gatewar 6400), it hangs at the screen Retrieving libc6-udeb. How do I fix this?
View 3 Replies
View Related
Oct 8, 2010
One very specific issue regarding KDE in OpenSuse 11.3
- when I close the lid of my laptop or get into a screen saver mode, sometimes when the xserver comes back to life it basically goes back to the KDE login menu (log out) without any warning...
I have looked at the detailed settings and power performance management but nothing there.... I am in fact in "don't do anything" mode (power management) but this does not seem to do much.
View 6 Replies
View Related
Jun 12, 2010
I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
View 3 Replies
View Related
Jun 4, 2011
I was hoping to install Fedora 15 x64 on my desktop on a seperate disk from Windows. I have tried about 15 times so far and keep getting errors. The same type of errors occur when trying Ubuntu 11.04 x64.
This is the spec of my PC:
Core i7 920 oc'ed to 4.00ghz (stable in Windows with temps under 60 degrees celcius at load)
Asus Rampage II Extreme
Sapphire Radeon 4890
6gb Ram
Install disk is an empty WD Caviar Black 1TB (Also, not sure if this is relevant, two soundcards - M-Audio Audiophile & Asus Xonar)
This is the error (I can't get it all written down because it reboots too quickly, so I've written down a selection):
SPU 4: Machine Check Exception: 4 Bank 5: be000000000800400
TSC 564..
And lower down the error: No human readable MCE decoding support on this processor type
I suspect this is due to overheating because when I boot back into windows the cpu temp has risen to 80+.
Is there going to be any way to get Linux on this machine without frying the processor?
View 10 Replies
View Related
May 31, 2011
I've this problem since I started to play videos through the internet. Whenever the videos is on full screen, it makes not only to stop the video but sometimes it becomes choppy. Also, when I try to play a video and another one is still buffering.. The video I attempt to play is still loading until I close the another that's buffering.
I'm frequently using Google Chrome.
View 1 Replies
View Related
Sep 4, 2010
My GUI seems to be stuck in some sort of debug mode. If a battery or network notification pops up in the upper right hand corner of my screen...there are lines thru the popup (sort of looks like nine slicing), and what looks like a debug message...."<urgencyLevel> - report incorrect urgency?". I'm not sure what might have been done in the system to turn these on....I know they weren't always there.
View 3 Replies
View Related
Jan 20, 2010
This is happening pretty often. when in ubuntu, usually while i'm browsing the web, my browser will go dim then a box will come up saying something along the lines of missing resources. the thing is, all my desktop icons will then turn to red x's and no text characters on any further boxes will show. when i restart it says grub error and takes one more restart to finally come on. i got fed up with it and switched over to windows 7 where my browser also froze and my computer froze up.
View 9 Replies
View Related
Jan 22, 2010
I'm new to the Linux scene. My school computer has linux and it works great, and I'm trying to get into programming, so I figured it'd be good to switch over to Linux (plus I just got a new computer, so it's a good time).
But, I don't know much about how to install it. I've burned a live cd from sourceforge (actually 2: the newest version and one older). I shut off the computer and put the cd in the drive, and then when I turn my computer back on I get the expected menu. I choose my language, and then it brings me to a screen with a few options: "Try Ubuntu without any changes to your computer", "Install Ubuntu", "Check disc for defects", "Test Memory", and "Boot from first hard disk" (plus some options at the bottom of the screen). I've tried every option on the menu, with both cds, but whenever I select anything, it freezes up right away. I've let it sit for 15-20 minutes, and nothing happens, so I'm pretty sure it's not me being impatient
I've also put the disc in while windows is running. When I double-click on my D-drive (in my computer) I get the error message "No cd detected, cannot run cd menu".
I'd be content running a different version of linux, I'd just like to have linux running (although I want it separate from Windows, I don't want Wubi). I'd like to be able to dual-boot, but I'd be willing to give up Windows entirely too. So, any ideas? Anything I can try? Oh, and I'm pretty inexperienced at this, so ask me if you need more details, and please respond in basic terms
View 3 Replies
View Related
Jan 8, 2011
I just bought a new Toshiba Satellite C650D which has AMD processor. For some rescuing, I wanted to put ubuntu live CD. Ubuntu starts with some screen but then it converts to text mode and just sit there. I have checked md5sum of the iso file I got , before burning it on the CD. After burning the image, I also checked the directory structure on the iso file and the CD. They are fine. Currently I am writing this from XP. How do I use Ubuntu Live CD.
For burning, I used infrarecorder with 'Burn Image' option. I had installed debian and win xp with the same CD , so I can't see the problem with the CD. Anyway, I tried doing this with different CD and the same problem appears.
The CD's are memorex
CD-RW 700 MB 4X multi speed.
And I don't get the ubuntu boot screen at all. Some screen with ubuntu symbol appears and then text mode with some information about the hardware and it hangs there.
View 9 Replies
View Related
