Debian Installation :: Computer Hangs After Install On External Hard Drive With Flashing
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
ADVERTISEMENT
Jan 12, 2010
I finally got my new internal hdd for my laptop. I plugged it in and installed windows 7 64 bit. Then I partitioned my external hdd (WD mybook 640gb), and installed ubuntu 9.1 on a 200gb partition of it. The problem is that I didn't unplug the internal hdd before I installed ubuntu. Now the computer will not start unless I have the external hard drive plugged in.
So what should I do so that I will be able to go into windows 7 normally if the external hdd is unplugged? I would also like to be able to use ubuntu when I plug in the external hdd. I wouldn't mind having to go to the boot menu and choosing the external hard drive every time I wanted to use ubuntu.
The reason I partitioned the external hard drive was because it has a lot more space than my 250gb internal hdd, and I also wanted to leave space open to use as was intended, to back up stuff.
However, now that I think about it, I wouldn't mind partitioning the internal hdd and just leaving the external blank (which I should have done in the first place).
View 5 Replies
View Related
Sep 18, 2015
I have got a 1TB USB hard drive, which I partitioned to be 500GB NTFS and on the other half I installed Debian 8.1.0. During graphical install I selected to install the bootloader not to the MBR but also to the external drive. After completing the installation I wanted to boot into Debian, but it just started Windows, which is installed on my internal. Even after choosing the USB drive in the boot menu, Windows booted. I later installed the bootloader to my internal, then I could boot into both Debian and Windows, but only if my hard drive was plugged in.
View 14 Replies
View Related
Feb 20, 2016
I have a 2TB external Hard drive that nonetheless is being used for booting Debian off of. I have downloaded the "debian-8.3.0-amd64-netinst.iso" and have extracted it to my external hard drive. The letter assigned to this drive is "I". When I shut it down and enter the boot settings, it asks me for a name and a path for a new boot option. I have tried many different paths including:
Code: Select allI:setup.exe
I:autorun.inf
I:debian.iso
setup.exe
debian.iso
I renamed the original Debian download (debian-8.3.0-amd64-netinst.iso) to "debian" so I didn't have to type the long file name into the path. When I type in "I:debian.iso" as the path and restart it pops up with a grub prompt, in my mind that tells me that some part of the debian.iso file is corrupted.
Specs:
Dual Core i5-3317U, 1.7 GHz, Turbo boosted
8GB RAM
1TB Internal Memory
64-bit OS and processor
Windows 8.1 Default OS
View 5 Replies
View Related
Apr 16, 2011
I want to make my own raid array, that is essentially identical to one of those commercially available external raid drives.The only thing is, I want to do this by using a dedicated computer as the drive, and connecting it to another computer to use as the server. Is there some way to do this. Maybe make a sata port on the raid computer appear lixe a hard drive to the server. Or use a usb 'crossover' cable to connect the 2.Is this even possible, or should I just use the raid computer as the file server too?
View 3 Replies
View Related
Apr 8, 2010
is there a way to install Ubuntu -from- an external hard drive. For example, let's say, you have a complete Ubuntu system with everything (no need to download additional packages/softwrae/etc anymore) , but you can't use remastersys to create an ISO with it because it is way over 10GB in size. Much larger than any DVD you could burn that newly created ISO to.. (besides remastersys is limited to the size of a DVD-r anyways)
Maybe someone has tried this before? Someone has created a dedicated large hard drive that is essentially the same thing as a ubuntu installation usb flash drive, to boot from an then install Ubuntu onto another "new" hard drive? I think it would be nice to have a hard drive (external usb or even better, an internal hdd drive i could hot swap to each new computer I have that I wish to install it onto.. ) And I think it would be so much faster to install from a Sata internal HDD drive than a USB pendrive or a cd/dvd rom, right?
View 2 Replies
View Related
Feb 14, 2011
I have downloaded UBUNTU 10.04 and saved to external hard drive since I have no CD drive in my note book. I want to install it from external hard drive what is the command and how can I install it.
View 1 Replies
View Related
Feb 20, 2011
my problem here in not 'how to install ubuntu on an external HDD' but the thing is that after installation,i play around a bit in ubuntu(install on my external HDD). ok,so the external HDD is connected through usb. My problem is ,is it safe to install ubuntu on it? As i am using an external HDD from : Western Digital Element 500GB, so when i shutdown ubuntu ,i hear(from the external HDD) a sound like a sudden stop,for example,when you are playing a movie from it then ,you just unplug it.It not the sound when you make a safe remove,then unplug it. i am worried as it may cause some problem to my external HDD over time. So ,tell me,do you think i can go on with this?
View 1 Replies
View Related
Jun 9, 2011
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
View 1 Replies
View Related
Jan 11, 2011
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
View 7 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jul 9, 2010
I have the Debian Lenny 5-0-5 DVD's but they are not live bootable. They come with a setup.exe file which copies over the kernel images to boot from windows. Thing is that at the moment I am running the Ubuntu distro of Debian and cannot use the setup to do it. Can anyone tell me how to boot this disk in ubuntu itself?
Also does the debian installer allow you to choose which disk it installs to?(I am talking about the thing in the ubuntu installer that allows you to partition disks and define your own mount points before the install)
View 1 Replies
View Related
Jul 23, 2010
A USB hard drive is used as backup drive.
When it is not plugged in, the system boots without any issues.
When it is plugged in, this hangs to the point I have to unplug the CPU.
View 4 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Aug 22, 2010
I have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies
View Related
Apr 12, 2014
I have a WD20EZRX (Green) 3.5" hard drive installed in an external USB3 case (Icy Box IB-351StU3S-B), which is detected as an AS2105 device in Debian 7 (Linux 3.13 from back ports). My computer is a TP X200s. The problem is that the hard drive does not spin down even with hdparm -S timeout set and the file system unmounted. It does spin down with the hdparm -y command, though, and stays that way until accessed. The case also seems to prevent the TP entering standby mode, or at least the indication light is left blinking when the lid is closed. Other than this, the drive works fine. It does have a GPT partition scheme and ext3 file system.
Note that the TP does have only USB2 ports.
View 0 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Oct 24, 2015
I am trying to install Debian onto an IBM ThinkPad 240X. The 240X will only boot from either an internal IDE hard-drive, or an external floppy-drive. For now, I have decided to ignore the option of using the floppy drive. I have other computers to support the process, an IBM ThinkPad T43p (Pentium M) as well as my primary laptop, a ThinkPad X200s (Core2 Duo). I have tried installing the hard-drive to be used into the T43p, then booting the Debian NetInstall from a USB thumb-drive, installing as usual, then transferring the hard-drive into the 240X. This does not completely work; GRUB and LILO will load, but the computer freezes very early (almost immediately) in the boot process.
Please note, I am trying this on a CF card. The 240X has an IDE-CF adapter, and my X200s has a USB-CF reader.So, I want to try to load the actual Debian Net Install on the 240X. Ideally, it will happen something like this; I will partition the hard-drive into these 2 partitions:
sda1: the Debian Net Installer
sda2: an empty partition waiting to have Debian installed onto it URL...
but the part I do not understand is how to get GRUB or LILO installed onto the CF card. I am wary of running commands such as "grub-install" as I do not want to mess up my GRUB install on the computers this command would be run from. If I run a command such as this, I would want it to ingore everything about the computer it is being run from, and only modify files or install onto the CF card. I would not want it to acknowledge the computer it is being run from as far as available installs, architecture, etc.
View 7 Replies
View Related
Feb 7, 2010
Can you install a live cd onto hard drive? I'm in a live environment now and don't see an install option.
View 10 Replies
View Related
May 22, 2014
My external hard drive (about 2 years old) won't mount. It wouldn't mount on Windows either. Other external hard drives (sdb1) mount perfectly.
I am wondering is there a Linux way of getting the hard drive to work again? The disc spins up so it's not a mechanical failure. I'm guessing here but is there a way of flashing firmware onto the external HD if that might be the problem?
(Seagate 2TB ST320005EXD101-RK)
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
[Code] .....
View 5 Replies
View Related
Apr 23, 2011
I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying
Code:
error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output
Code:
(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)
When I tried to type
Code:
ls (hd0)/
I only got a message
Code:
error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...
If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.
1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)
2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device
View 3 Replies
View Related
Oct 21, 2010
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
View 3 Replies
View Related
Jun 12, 2011
What I've done is partition my external hard drive to have 130g for my Windows info. Then putting the 90g towards Linux. I used a live cd on my home computer to format the 90g of Linux. I'm simply wanting something to learn more about from time to time that I can use on my home computer, laptop, fiance's computer, etc. So the formatting went successful. I have linux on the 90g of hard drive that I wanted it on. The problem is this. When I take the live cd out, when I remove my external hard drive from my computer. The home computer (which has Windows) won't boot. It comes up with a error 21. But now when I boot with the external hard drive I use, I make it to the boot menu and can boot from Windows.I need to be able to boot from Windows on this home computer, since my mother and grandparents use this computer quite a bit. I'm not always going to have my ext. hard drive plugged into this computer, so I need some help if you all know now.
View 9 Replies
View Related
Oct 28, 2010
I have a 40 gig external drive that I want to use for Linux. I want the complete install of Ubuntu 10.10 on it so that I can boot straight from there. I tried for hours to accomplish this. The instructions I saw for the issue were for an older version of Ubuntu, and the menus have changed since then. The furthest I got with the project is creating a bootable disk on my drive; it will boot from the drive, but not the full installation. It brings up the menu just like it was a live CD and gives you the options to either "Try Ubuntu" or "Install Ubuntu." I have installed it straight to the drive, but it will not boot from it. My computer does give me the bios option to select boot priority with USB external drives.
View 9 Replies
View Related
Feb 2, 2011
I'm a newbie and can't get to linux on my external hard drive. I recently did a full install of Ubuntu 10.10 and am currenly running XP on my main drive. When I boot I can choose to go to my ext hard drive, which holds Ubuntu, but I'm stuck with a grub command line. What do I need to do to boot into Ubuntu from grub?
View 8 Replies
View Related
May 6, 2011
I was wondering if it were possible to run and boot Ubuntu off of an external hard drive, I have a Seagate Free Agent 1.5 Terabyte external hard drive, I formatted it to FAT32 but am willing to reformat if necessary. I just really want to be able to have Ubuntu to run off of an external hard drive.
View 7 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
May 30, 2015
I can't mount my external hard drive with the graphic interface of my Xfce desktop anymore, since the latest upgrade.
The disk does show up, but when I try mounting it, I get a pop up window telling me that :
Failed to mount "My_Passport". Not authorized to perform operation.
View 12 Replies
View Related
