Debian Hardware :: Default Detect Intel Pro Wireless And Atheros?
Jan 22, 2010whether debian lenny can default detect intel pro wireless and atheros?
View 7 Replies
ADVERTISEMENT
Debian :: Where To Find The Fw-detect Command ? (for Firmware / Wireless Detect)
Jan 12, 2010Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
Debian Hardware :: Atheros AR9271 Wireless USB Adapter Not Working?
Mar 13, 2011Anyone knows what is the right driver for this device? It is not being recognized by the system, and there is no Atheros AR9271 on url
View 9 Replies View RelatedDebian :: BCMxx - Wireless Isn't Working - NetworkManager Doesn't Even Detect A Wireless Card
Jul 14, 2010I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
[Code].....
Debian Hardware :: Atheros Based Wireless Card - Cannot Resolve Addresses
Apr 19, 2015I am using an atheros based wireless card. I am able to scan for and find networks but can not resolve addresses:
procyon@debian:~$ sudo ping -I wlan0 8.8.8.8
ping: Warning: source address might be selected on device other than wlan0.
PING 8.8.8.8 (8.8.8. from 10.0.0.7 wlan0: 56(84) bytes of data.
From 10.0.0.7 icmp_seq=1 Destination Host Unreachable
From 10.0.0.7 icmp_seq=2 Destination Host Unreachable
From 10.0.0.7 icmp_seq=3 Destination Host Unreachable
From 10.0.0.7 icmp_seq=4 Destination Host Unreachable
From 10.0.0.7 icmp_seq=5 Destination Host Unreachable
From 10.0.0.7 icmp_seq=6 Destination Host Unreachable
Ubuntu Networking :: Slow File Transfers (FTP, SCP) With Intel Gigabit Or Atheros WLAN?
Nov 16, 2010I just installed ubuntu as my primary OS, but I have the disk with XP on it and I don't want to go back, but I need faster network connectivity. I have a T60p with Intel Gigabit jacked into my Gigabit router which also has my desktop (running XP) and my NAS. If I FTP files from my NAS (or SCP), I get transfer speeds around 250-500 KB/s (which is not very fast). On this same switch, from my XP desktop I get transfer speeds around 12 MB/s. I get the same speeds using my 802.11n card (Atheros) as with the ethernet NIC (250-500 KB/s).The drivers for the ethernet card and the atheros card are e1000e and ath9k respectively.I have disabled IPv6. Since the problem occurs using either interface, I am just going to concentrate on fixing it for the Ethernet interface (since I believe it to be a systemwide problem).
Code:
skinnersbane@albert:~$ sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
[code]....
Clearly my card is running at Gigabit, but why the bad transfer speeds? I am using filezilla for FTP (technically FTPES). I closed every other program. My CPU utilization does seem high and I wonder if this is part of the problem. I had no problems with throughput using either interface in Windows XP just one week ago.
Networking :: Ethernet Intel Gigabit Controller Is Broken Or That Atheros Driver Is Missing?
Apr 21, 2011I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
Debian :: BCMxx - NetworkManager Doesn't Detect Wireless Card
Jul 14, 2010I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code]...
OpenSUSE Wireless :: Painfully Slow Wireless Throughput On Atheros AR5001 Card
Aug 12, 2010I have a Acer Revo R3610 nettop on which I installed oS11.3. It has an Atheros AR5001 wireless network adaptor.I'm getting very bad latency and throughput on with this card. In comparison my Thinkpad with Intel card achieves at least 10 times the throughput from the same location. Also when I boot my wifi will come up authenticate and then a few seconds later disconnect and reconnect. I've tried updating the kernel to 2.6.35 as one of the fixes was to improve the performance of the ath5k driver. I'm using wpa2 authentication.
Here are some details:
Code:
mediacentre:~ # /sbin/lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: Acer Incorporated [ALI] Device [1025:0222]
[code]....
Is there anything else I paste that will help determine the cause of the bad throughput. Browsing the web or copying files across the network is bordering unusable.
OpenSUSE Wireless :: Atheros Wireless Adapter Not Working On Compaq Presario C700?
Feb 12, 2011I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
Software :: Installing Wireless Drivers With Atheros AR9285 Wireless Network Adapter?
Jan 12, 2011I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedDebian Hardware :: Can't Connect To Wireless With Intel 2200
Jun 12, 2011I just changed over from Ubuntu to Debian Squeeze and now my WiFi doesn't work. My computer is a Toshiba Satellite and the wireless card is Intel 2200bg. I think that's the name of it. That's the driver, anyway. My router is using WPA2, and using iwlist scan, I can see the network just fine. When I try to connect, though, it starts to connect for a while, says it's validating authentication, then says it fails. I've triple-checked my password and it's right.
View 9 Replies View RelatedDebian Configuration :: Intel 5100 Wireless On Toshiba Laptop?
Feb 5, 2010I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
View 11 Replies View RelatedDebian Hardware :: Very Slow WiFi Intel Wireless-N 1000
Jun 9, 2015I've noticed that my wifi connection is significantly slower than my wired connection. Obviously wired is always faster, but when I boot in to windoze or use Mac, the difference between wired and wifi is negligible. I'm running Debian 8 testing on a Lenovo X201 with Intel Corporation Centrino Wireless-N 1000 [Condor Peak] network card.
View 14 Replies View RelatedDebian Hardware :: Intel Centrino Wireless-N100 Not Ok With Squeeze?
Jul 17, 2011I just got a new laptop equipped with some weird (at the present) hardware.
=> Intel Corporation Centrino Wireless-N100
=> Atheros Communication Device 1083
During the squeeze install no network harware was detected. (no wired, no wireless) On the net I read the wireless-N100 should be supported from the kernel 2.6.37 At last I tried Ubuntu 11.04 (LIVE) and the wifi was working. I also tried Fedora 15 (LIVE) and the wifi was also working. (kernel 2.6.38)But I want to stick to Debian (I am using it since Potato) What could I do to get at least the Wireless-N100 working ?
Ubuntu Networking :: Intel Wireless Cards Compatible With Non-intel-based Laptops?
Feb 22, 2010Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies View RelatedDebian Installation :: No Wireless On Jessie Testing With Intel 6300 Card
Mar 9, 2015I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.
View 3 Replies View RelatedDebian Configuration :: Unable To Get Intel Pro/wireless 3945abg Connected To Router
Mar 2, 2010I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.
View 7 Replies View RelatedDebian Multimedia :: XOrg Auto-detect Failing To Detect Max Screen Resolution
May 29, 2011I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
Hardware :: Detect Intel 82574L Gigabit Ethernet On Ubuntu 8.04?
Feb 14, 2011I'm having issues with Ubuntu 8.04 to see my Intel 82574L ethernet card. Ubuntu is not detecting it at all.
I downloaded the drivers from
[URL]
copied it to the server, untarred, make install ,and now i'm getting notifications that kernel-devel is not installed. I installed linux-headers from the install cd ( ihave the alternate and server one), but i cannot find any kernel-devel or linux-kernel-devel. The driver still does not want to build after installing linux-headers.
I need to use Ubuntu 8.04 due to some specific requirements, do i need the network cards to work.
Fedora Hardware :: Atheros Wireless Adapter -- "Enable Wireless" Checkbox Will Not Stay Checked?
Mar 23, 2011It worked on install but quit after the first system update. The "Enable Wireless" checkbox will not stay checked. I've attempted to manually install the madwifi driver to no avail.
kernel: 2.6.35.11-83.fc14.x86_64
device: Atheros AR928X wireless adapter
Debian :: Didn't Work With The Default Wireless Drivers
Jul 20, 2010I have gotten Debian working quite well on my Sony Vaio laptop for the past 6 months or so, and it's a very rewarding experience. I however have a small amount of problems that I could not find the answer to through googling or reading Debian instructions.
1) I have an Atheros-based wireless chipset in my laptop that didn't work with the default wireless drivers in Debian. So I replaced them with madwifi drivers and it works great now. However, every time I restart the computer, it defaults back to 1mb/s wireless speed; making me go into root terminal and change the speed with "iwconfig ath0 rate 54M". Obviously this gets a little bit annoying to enter every time, so I am looking for a way to make it automatic. I have looked on Google and gotten some hits but none of them have been successful.
2) Whenever I put the computer on stand-by then return, the wifi refuses to connect. Networkmanager tries to connect then crashes. I have found no hits on this issue with my configuration. Very odd.
Debian :: Default Ip Address For Broadcom Wireless Not Modifiable
Jan 7, 2010OS is Debian Lenny. Hardware inspiron 5100. Wireless mini-pci is broadcom 1600.Anywho,did a netinstall and all works well except I can't get the default ip that comes up with the cool wireless strength meter to change. I've tried (almost ) everything. The network gui lets me modify all the values, but is useless. I can get the wireless to work by going in and modifying the interfaces file and getting rid of the avahi-daemon function that discovers the addresses.
So, if I reboot with the re-written addresses in the interface file, and then 'iwconfig wlan0 essid' to my netgear it works. But, no pretty signal strength and I have to manually assign the netgear portion with iwconfig.While installing 'etch' on a desktop I noticed belatedly that if I had no cable connected the install asked me for ip, gateway, etc. Which bring about the questions.Is there a way to change the default values that come up with the automatically assigned ip.Will the netinstall give me a chance to input a manual ip and will it then plow under all the currently installed 'stuff' on the drive. The system runs well except for this.Failing that, is there a step I can take early in the netinstall to modify the data.Or, failing that, is there a way to modify the default if I instead make a disk 1 of lenny and run it?
Fedora Networking :: F14 Does Not Detect Onboard LAN Card (DH67BL Intel Mother Board)
Apr 24, 2011I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.
View 5 Replies View RelatedNetworking :: Getting Wireless Set Up For Atheros AR9287?
Nov 18, 2010I'm new to the linux community -started using Slax as of this morning. I'm having trouble getting wireless set up for my Atheros AR9287, I found that Compat Wireless should get the thing to start working.
Problem is I have no idea what I'm doing setting it up. Can anyone explain this to a total novice? Or have anything else that will get it to work?
Software :: Best Way To Get Atheros Wireless Working
Mar 5, 2011i have a dell duo and i am wanting to install ubuntu Q. there is no LAN connection what is the "best" way to get the atheros wireless working.i have looked around for a driver to downlod found several that appear as they would work i just don't know which would be the best or the best way to download and install it?
View 7 Replies View RelatedUbuntu Networking :: Get Your Atheros 802.11n Wireless Working In 9.1?
Jan 11, 2010I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal:
sudo apt-get upgrade
Once that finished, restart your computer. Again open up terminal and type:
sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
General :: Detecting Atheros Wireless Card On HP?
Sep 2, 2009I am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies View RelatedOpenSUSE Wireless :: Knetworkmanager Detect Wireless Network But Doesn't Automatically Connect
Apr 17, 2010at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
Fedora Networking :: Slow Wireless With Atheros AR9285?
Nov 3, 2010I'm facing problems with Fedora13 and the AR9285 wifi card... the connection is just too slow, and the wired connection works fine. I just figured out that a lot of VAIO users (so am I) were in the same situation, and solved their problem by downloading ath9k drivers from linuxwireless.org. Fine, I did it! That's what I found :
Quote:
Building and installing
cd /path/to/compat-wireless-2.6.32-rc5
./scripts/driver-select <driver-name>
make
sudo make install
...but make is looking for source files in /usr/src/kernels/2.6.34-7-61.fc13.x86_64/build/ , which doesn't exist! The /usr/src/kernels/ folder is just empty. I also found something about the fact that Fedora13 didn't came with kernel's source files... So how can I install that driver? (I didn't find the package via yum...)