Debian :: TLS Connection Was Non-properly Terminated
Mar 21, 2016
I'm coming from Linux Mint 17.2, and just installed 8.3.0. Now I am at work and discovered that I can't use git to connect to our BitBucket repository (hosted on scm manager) Every action that involves communicating with the remote repo results in this error: fatal: unable to access 'https://<repo url>: gnutls_handshake() failed: The TLS connection was non-properly terminated.
I have been searching the web to find a solution and it seems the gnutls library is very picky. It does not seem to be possible to force git to use openssl instead without a manual compile. I could do that, but I don't want to since then I have a non-standard system and lose the automatic updates, and manage that manually. Could I somehow reconfigure Debian to use openssl over gnutls?
View 1 Replies
ADVERTISEMENT
Sep 28, 2010
When I am trying to open a movie with movie player I get the following.
An error occurred
Disconnected: Connection Terminated.
An error occurred
pa_stream_cork() failed: Connection terminate
An error occurred
pa_stream_writable_size() failed: Connection terminated
I've installed all of my codecs with autoten.
View 10 Replies
View Related
Mar 14, 2010
I tried since yesterday to get a VPN-connection but it seems that until now I'm not able to reach the Company-network. Our company use the pptp connection. I tried many different setup's but without sucess. I use Ubuntu 9.10 and installed the pptp-manager.
Following settings:
Gateway (set)
Username (set)
MSCHAPv2 (check)
Point to point (check)
Stateful (check)
BSD (check)
Deflate (check)
TCP (check)
Below you find the result from the syslog, what can I do now?
Code:
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:950]: PPTP_SET_LINK_INFO received from peer_callid 0
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 log[ctrlp_disp:pptp_ctrl.c:953]: send_accm is FFFFFFFF, recv_accm is FFFFFFFF
Mar 14 13:03:58 snofla-desktop pptp[2767]: nm-pptp-service-2756 warn[ctrlp_disp:pptp_ctrl.c:956]: Non-zero Async Control Character Maps are not supported!
Mar 14 13:03:58 snofla-desktop pppd[2759]: Connection terminated.
Mar 14 13:03:58 snofla-desktop NetworkManager: <info> VPN plugin failed: 1 ......
View 1 Replies
View Related
Jul 22, 2010
I tried running .mkv movie file using Movie Player from Ubuntu but I got an error saying "pa_stream_writable_size() failed: Connection terminated".
View 1 Replies
View Related
Jun 5, 2010
I ran Movie Player to play .mov file, but it generate the following error message:
pa_stream_writable_size() failed: Connection terminated
The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.
View 5 Replies
View Related
May 22, 2010
I recently installed 10.04 LTS. I am now having problems with video playback. When I watch an .avi file in media player, it will play for a few minutes and then come up with an error: pa_stream_writable_size() failed: Connection terminated
When I play them in vlc and kaffine they will play briefly then the sound will cut out. KMPlayer just stops without an error message.
View 4 Replies
View Related
Jun 4, 2010
I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
View 1 Replies
View Related
Jan 21, 2010
One year after the release of Debian GNU/Linux 5.0 alias "lenny" and nearly three years after the release of Debian GNU/Linux 4.0 alias "etch" the security support for the old distribution (4.0 alias "etch") is coming to an end next month. The Debian project is proud to be able to support its old distribution for such a long time and even for one year after a new version has been released.
The Debian project released Debian GNU/Linux 5.0 alias "lenny" on the 15th of February 2009. Users and Distributors have been given a one-year time frame to upgrade their old installations to the current stable release. Hence, the security support for the old release of 4.0 is going to end in February 2010 as previously announced.Previously announced security updates for the old release will continue to be available on security.debian.org.
View 10 Replies
View Related
Feb 27, 2015
Has successfully compiled Handbrake from source and got it to run? I've been trying to get this working for a while now, and everything I find on the interwebs is for Debian 7.6, and it seems as though things have changed a bit and those suggestions don't work.
I get this error when I try to configure it
Code: Select all : ../libhb/common.c:16:18: fatal error: x264.h: No such file or directory
 : compilation terminated.
 : make: *** [libhb/common.o] Error 1
View 1 Replies
View Related
Jul 15, 2010
whenever me, or someone I'm calling accept a call, the window that shows sound inputs and is for call closes. Then I can see a message in chat window: The call has been terminated.
View 8 Replies
View Related
Jan 27, 2011
I have a dual boot (XP Pro and F13) laptop. This laptop has a Ralink RT2501USB Wireless Adapter which works perfectly fine on XP. But when it comes to F13, adapter only works properly when I am physically next to my router. When I move few feet away the strength of the connection drops from 100% to around 40%. But even though 40% should be okay for slow connection to internet, I can't get any internet access at all. I have tried three different routers with same results on each.
When I boot same machine with windows XP, all works fine. I can move to any part of my house and I will still have the connection without any issues.I can see that RT73 driver is installed if I check in add remove program under system.I am not an expert but to me its seems that the drivers on F13 for RT2501USB are not as good as on windows?
View 2 Replies
View Related
Jun 15, 2010
v10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
View 2 Replies
View Related
Apr 15, 2011
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
View 4 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Sep 22, 2015
The situation: The office has a WiFi network on one DSL line, which is used for our VoIP call center, and a wired network for our internal network and the majority of web surfing/traffic . Part of the office must be temperature controlled/monitored - we have a rather nice digital thermometer which is WiFi enabled.I have a Debian Wheezy box with a WiFi card and ethernet connection
What I'm trying to accomplish:Connect wifi enabled thermometer to WiFi network so it can automatically send temp updates (currently I have to do it manually via USB)Have the Wheezy box accept the downloaded file then send it to a back up server in the wired network
Side things that may be useful : Prefer to use wired connection for internet and apt and suchWiFi connection will really just be used for connecting to the thermometer
This [URL] .... topic got me thinking that there might be a way to bring the two networks together, but I don't know if that will wreak havoc on things. I know, the Windows and Mac OS don't like having ethernet and wifi at the same time, might Linux be better for this?
v&n had this to offer in the prior thread [URL] .... which I'll be doing more research on.
View 2 Replies
View Related
Aug 31, 2015
I wish installing MariaDB was as simple as installing MySQL. I purged MySQL and installed MariaDB instead. I ran mysql_secure_installation, and that ran fine, but for some reason, the password I set up doesn't seem to work. I've run mysql_secure_installation several times with no success.
However, running Code: Select allmysql -uroot when logged in as root or with sudo logs me in just fine, without even asking for my password. How do I set up a password for the MariaDB root user so that I don't need to be superuser to connect to MariaDB?
View 1 Replies
View Related
May 15, 2010
has anyone got plymouth running properly on debian sid yet?
View 14 Replies
View Related
Jul 6, 2010
If I close IceDove and then start it again, I get the message that it's already running. Although the GUI has gone, icedove-bin is still running.
View 4 Replies
View Related
Mar 13, 2011
URL...does this theme work properly in debian? tried installing it but has many defects, what do I need to make it to work?
View 5 Replies
View Related
May 15, 2011
My computer has been running well for a couple of years with Ubuntu and the Gnome desktop. I use a very cheap webcam from PCWorld PC Line 1.3 Mega Pixels with Cheese and Skype which worked on Ubuntu. The new Ubuntu Unity desktop seems most unintuitive and reading that Ubuntu may not include Gnome for the next release is my reason to make the change to Debian. I am aware Ubuntu is a Debian derivative.
I have installed Debian Squeeze and everything is working properly apart from the webcam. When I open Cheese the webcam works but very slowly although it will not capture video. When I open Cheese > Preferences, I see the Device listed as USB 2.0 Camera (/dev/video0) but greyed out. When I open Skype > Options > Video I see the same greyed out listing but no image appears in the test area.
lsusb Bus 001 Device 002: ID 0c45:62e0 Microdia MSI Starcam Racer Computer: Gigabyte motherboard with onboard video and sound.
View 4 Replies
View Related
Apr 29, 2010
My probelem is with alsamixer. I can't record anything; nothing I play back hasany sound. I have alsamixer capture set on mix. I know I recordedin the past with this setting, so I don't know what is happening. I amrecording from the internet.When I adjust the volume on playback in either alsamixer or kmix thevolume settings change on the other as well. when I adjust thevolume setting in capture it doesn't affect each other.If I have Kmix > inpur > capture enabled I can record, but the playbackdoesn't sound good. I would like to figure what is wrong with alsamixer.
View 1 Replies
View Related
Sep 9, 2011
Debian won't display Japanese characters properly, it shows them as symbols. Is there a language pack or a particular browser plugin I need to install? It's sort of a noobish question, but I looked for something related to this issue in my Package Manager, and didn't find anything that seemed suitable/related.
View 2 Replies
View Related
Aug 8, 2015
I have Apache setup on localhost with a wiki, ethercalc, etherpad and kanboard.
Wiki is on port 80, in /var/www/html so when someone enters domain into browser it comes up, which is what I want. It comes up lightning fast.
Problem is how to properly direct to other ports i.e. 8000, 8002 and 9001 for other applications. All others are in /usr/share.
I tried creating directories with .htaccess for each in /var/www/html, but if they even come up (kanboard completely unreachable) they are super slow, drop connection and usually don't render completely.
I've read that if you have access to Apache configuration .htaccess is wrong way to go and for security reasons app files shouldn't be directly located in /var/www/html?
View 7 Replies
View Related
Mar 24, 2011
i will try to keep this post short and to the point. i am currently running debian with kde and i am trying to edit /etc/apt/sources.list. i know that this file needs to be opened as root for the changes to it to be saved, so what im doing (in konsole) is:
concreteabstract@debian:~$: su
Password:
root@debian: /home/concreteabstract# kwrite /etc/apt/sources.list
but that doesn't work, and the message i get is:
No protocol specified
kwrite: cannot connect to X server :0.0
View 5 Replies
View Related
Nov 10, 2014
I recently reinstalled Wheezy on my laptop and after the install was finished I installed the brcmsmac driver, using the instructions on this wiki page: [URL]. I have the device BCM43224. I noticed though that this driver seems worse compared to the proprietary broadcom-sta I had on my previous installation and so I would like to switch. I know that there is a guide on how to install the proprietary drivers on the wiki ( [URL]), but it feels like i should remove the free driver before I install the proprietary one, and I dont know how to do this .
So my question is: what is the proper way of changing from the open brcmsmac driver to the proprietary broadcom-sta driver?
View 2 Replies
View Related
Feb 22, 2009
Well at the moment i have just installed Debian 5. I've downloaded nvidia-linux-x86-180.29-pkg1.run and i need someone to help me out step by step on how to install this properly.
View 4 Replies
View Related
Mar 29, 2011
How can I set up multipath to two devices properly? I'm sure that I need to do something more then just: /etc/init.d/multipathd start
View 1 Replies
View Related
May 30, 2011
Since I prefer bigger than default size fonts, I am having a problem using iceweasel. Web-pages, especially frames, are not drawn properly with overlapping and hidden text. I am thinking about alternatives that may exist than can replace iceweasel.
View 14 Replies
View Related
Mar 1, 2015
I have an hp pavilion 15-b106ed with UEFI. I disabled secure boot and installed debian jessie form the CD1 iso (RC1 installer) burned to an USB key. Installation went smoothly, but after rebooting I get grub's terminal-like screen saying:
"GNU GRUB version 2.02 beta2-9ubuntu1. Minimal BASH-like line editing is supported... etc"
The problem is that as soon as I turn on the computer that grub screen shows up and I can't boot from USB anymore nor
access the BIOS settings, no matter how fast I press F9, F10 and such. I guess I have to tell him to boot from the USB using the grub terminal...
View 9 Replies
View Related
Apr 1, 2014
I've got a problem with touchscreen (NNK Switches 5.7" model: FT-CU04B). It is not supported under Linux, but I managed to get it working with usbtouchscreen module, after some modifications of course. It gets recognized by system now, it is possible to calibrate it correctly through xinput_calibrator but it isn't possible to "left click with it". I know that it's weird so I want to make myself clear - touchscreen recognizes touch - when touching button for example, it reacts with "going down" but when I'm releasing button, it "goes up" again, without action. I've tried mapping left mouse button with xinput set-button map 1 0 0 0 0 0, but without success, buttons remain "unclickable".
lsusb:
Code: Select allBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code] .....
View 2 Replies
View Related
