Well at the moment i have just installed Debian 5. I've downloaded nvidia-linux-x86-180.29-pkg1.run and i need someone to help me out step by step on how to install this properly.
View 4 RepliesBeing a total beginner to linux, I can't seem to find a decent guide on how to install these drivers without much hassle, even though I've been searching for almost couple of hours now.
First, my system specs, taken with Hard Info
Processor: 2x AMD Athlon(tm) II X2 240 Processor
Memory: 3091MB (1865MB used)
Operating System: Ubuntu 10.04.1 LTS
-Display-
Resolution: 1360x768 pixels
OpenGL Renderer: GeForce GT 220/PCI/SSE2
X11 Vendor: The X.Org Foundation
-Multimedia-
Audio Adapter: HDA-Intel - HDA NVidia
Audio Adapter: HDA-Intel - HDA NVidia
-SCSI Disks-
HL-DT-ST DVDRAM GH22NS50
Now, I've installed the "default" (dunno if that would be the correct categorizing) driver with the "Hardware drivers" utility from System->Preferences->Hardware drivers because I've failed numerous times trying to install the package from nVidia site ; I would always get an error while trying to run the package :
"It seems that X server is running on your linux, please deactivate it to install this package" or something like that, but I'm sure it was about X running.
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64
[code]...
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
I installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
I looking for a new disto been using ubuntu. my friend recommended Debian, I just installed it and made it unusable very quickly by trying to use repositories for ubuntu. I'd like to know if there is an easy way to make my wireless work like in ubuntu it just does, (i don't even need to attach a cat 5 cable after install), and I'm happy in my blissful ignorance. Also an easy way to install nvidia drivers?
I need Broadcom and nivida 173 drivers. I looked through the Debian forums while I had a working system but found nothing easily and iceweavel was so slow, unless there was something wrong with my wired connection. Is there an easy way to install no free drivers?
I am trying out Debian 6 and was wondering how I install the Nvidia drivers. In Ubuntu, I just had to launch Hardware Drivers and install the drivers from there. Is Debian a harder distro to use than Ubuntu? Like I said, I am trying it out. I have a tendency to explore the different Linux distros hopefully finding one that is drop dead easy to use and maintain.
View 3 Replies View RelatedI want to install the nvidia drivers from the repository (they seem quite updated lately). But i hit some issues:
# aptitude install nvidia-glx
The following NEW packages will be installed:
libgl1-nvidia-alternatives{ab} libgl1-nvidia-glx{ab}
libglx-nvidia-alternatives{a} nvidia-glx nvidia-installer-cleanup{a}
nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-support{a}
nvidia-vdpau-driver{a}
[Code]...
Since the nvidia packages are in testing i assume they can be installed, do they?
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
View 8 Replies View RelatedI'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
It seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
My problem is that I am trying to install nvidia drivers I got integrated card nvidia geforce 6100 nforce and amd x2x64 processor and also squeeze x64, so I downloaded the driver but when I try to top gnome I cant
/etc/init.d/gdm stop it says no such file or directory
So I google it and I found that squeeze has genome 3 so I put:
/etc/init.d/gdm3 stop
and it just appears a black screen just with a prompt but without any shell, I cant sign in debian or do anything it is just a black screen and i try ctrl+alt+f1, f12, f8, space and nothing, I can write but it doesn't response the only thing that I can do is press ctrl+alt+dell and it restart the PC. How can I stop gnome to install my drivers?
When i finish install debian7.8 wheezy in my Acer computer(graphics :GT750M+ Inter HD Graphics Family),
it appear:
"GNOME3 Failed to Load"
" Unfortunately GNOME 3failed to start properly anmode"
"This most likely means your system(graphics hardwcapable of ....."
i check system's Driver status:Gallium 0.4 on llvmpipe(LLVM 0x209) Experience Fallback so i try to install nvidia drivers in debian,but i have failed many times. everytimes i finish install nvidia drivers i 'startx " failed
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
I've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
View 6 Replies View RelatedI've just installed the Nvidia drivers on my Debian, however, after i do it, the laptop brightness control doesn't work anymore... When i press the keys, i see the brightness bar, however, the brightness stays at maximum. I've used the following commands to install the drivers.
apt-get update
apt-get install nvidia-kernel-source
m-a a-i nvidia-kernel-source
apt-get install nvidia-glx
[code].....
The Laptop is a Sony Vaio VGN-FE21B with a Nvidia Geforce 7400
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedI recently reinstalled Wheezy on my laptop and after the install was finished I installed the brcmsmac driver, using the instructions on this wiki page: [URL]. I have the device BCM43224. I noticed though that this driver seems worse compared to the proprietary broadcom-sta I had on my previous installation and so I would like to switch. I know that there is a guide on how to install the proprietary drivers on the wiki ( [URL]), but it feels like i should remove the free driver before I install the proprietary one, and I dont know how to do this .
So my question is: what is the proper way of changing from the open brcmsmac driver to the proprietary broadcom-sta driver?
I have wild idea to build a new Ubuntu computer from scratch. This is a great motherboard with lots of features, planning to have a RAID, and an AMD 64 bit processor(s). I want to be sure that I am installing the correct drivers..can anyone point me to a 'guide' to building a computer such as this?
View 12 Replies View RelatedSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
When I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.
When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:
"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."
While trying to solve the problem indicated in another thread [URL] .... I realised that I do not have the file /etc/X11/xorg.conf.
Also, if I enter the command Code: Select allsudo kate I get
Code: Select allcannot connect to X server :0
I tried logging in to another terminal (tty3) and entered
Code: Select allstartx
Kate opened normally with root permissions.
Currently I have a Nvidia card but I am using nouveau drivers.
My question is: installing the Nvidia drivers (following the guide in [URL] .....) would fix these Xorg issues?
I had troubles with nvidia drivers in other distros....
I'm in a bit of a rush so thought I'd ask two questions in one thread here.
1. Will a .deb made for ubuntu likely run into much trouble if I run it on Lenny?
2. Does the nvidia official proprietary driver come by default with a full 5-DVD install of x64 Debian 5.0.4, or do I need to install it myself? If so, is it enabled by default, or do I need to enable it? How?
I'm running Lenny and the nvidia driver is 173.* I need to upgrade to the current nvidia driver but when go to install it I get the message that it was copiled with a different version of gcc and might screw up my kernel. any suggestions to upgrading to the current nvidia driver?
View 6 Replies View RelatedSounds drivers not working properly after fresh install of Natty.
View 3 Replies View Relatedwhen i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
View 9 Replies View Related