My computer has been running well for a couple of years with Ubuntu and the Gnome desktop. I use a very cheap webcam from PCWorld PC Line 1.3 Mega Pixels with Cheese and Skype which worked on Ubuntu. The new Ubuntu Unity desktop seems most unintuitive and reading that Ubuntu may not include Gnome for the next release is my reason to make the change to Debian. I am aware Ubuntu is a Debian derivative.
I have installed Debian Squeeze and everything is working properly apart from the webcam. When I open Cheese the webcam works but very slowly although it will not capture video. When I open Cheese > Preferences, I see the Device listed as USB 2.0 Camera (/dev/video0) but greyed out. When I open Skype > Options > Video I see the same greyed out listing but no image appears in the test area.
lsusb Bus 001 Device 002: ID 0c45:62e0 Microdia MSI Starcam Racer Computer: Gigabyte motherboard with onboard video and sound.
i recently installed guvcview on xubuntu and the window just shows up as a black screen with nothing and according to the uvc website my Logitech QuickCam Communicate Deluxe is supported by linux when i start up guvc the webcam's light turns on so i think its working
I'm using the 10.04 Netbook Edition on an ASUS EeePC 1005HA. Earlier, I had 9.10 Netbook Remix installed. Under 9.10NR, the webcam worked wonderfully in Cheese. Once I upgraded to 10.04NE, the webcam became sluggish to the point where it is now unusable. In video mode it captures about 1 frame per five seconds. Under 9.10NR, it regularly captured 60 fps.
Did the driver package for webcams change significantly between 9.10 and 10.04? I can't think of anything else that would cause this issue due to an OS upgrade.
Debian Squeeze 64 bit, SPC890NC Philips Webcam, Gnome, Nvidia GT 220, LG 1440x900 Monitor I don't have compiz, etc.
Cheese is distorted, discolored. But XawTV and guvcview work fine. 640x480 Image of webcam is below. I do have Cheese pointing at my webcam and not my Digital TV card.
My probelem is with alsamixer. I can't record anything; nothing I play back hasany sound. I have alsamixer capture set on mix. I know I recordedin the past with this setting, so I don't know what is happening. I amrecording from the internet.When I adjust the volume on playback in either alsamixer or kmix thevolume settings change on the other as well. when I adjust thevolume setting in capture it doesn't affect each other.If I have Kmix > inpur > capture enabled I can record, but the playbackdoesn't sound good. I would like to figure what is wrong with alsamixer.
my cousin recently brought me an old dell to see if I could get it working.he mainly wants to use this machine to record himself playing guitar.I immediately tried installing ubuntu, but found it to be unbearably slow.the computer is on the verge of being an antique at 1ghz and 256mb of ram.so I started looking for alternatives, and decided to give debian a shot since I'm familiar with ubuntu and know that it is based on debian.I installed Debian Lenny from the netinst ISO and find it to be much quicker booting and loading programs than ubuntu.I will most likely put debian on my desktop when I'm finished getting this poor old dell set up.
I'm unable to get sound output working properly.I have checked that the volume is not muted. while using pidgin, after sending a message the "message sent" sound starts "skipping" like a scratched cd and the only way to get it to stop is to close the progam completely. I am unable to hear sound or watch videos with totem (and most likely other players, but I have not tested any yet).the files load audio files show their tag information and the length of the track and videos load the first frame but the file never actually plays. when I try to record with Sound Recorder, the application locks up.when I try to record with Audacity the software doesn't stop responding, but also doesn't record.I tried un-muting the microphone (monitor) to check that the microphone I have still works, and can hear it over the speakers, so this leads me to believe that my hardware is in good working order, but that I have something configured improperly.
My sound on Runescape stops and picks up, is very choppy and annoying. I'm using Debian "Lenny". Sound on everything else works just fine (Flash, VLC, etc...)
The web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
I had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks RewriteEngine on RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
I'm looking to buy a new webcam to use under karmic/lucid, but I'm not sure which one is best. I've taken a look at the list of supported web cameras, but I was hoping for some recommendations. The cheaper the better
I have a crappy usb UVC webcam (iCan brand), but I don't really know how to get it working? Do I need to install any drivers? What software would I use to get it to work? Do I need to enable anything? It doesn't seem to be showing video if I open skype, although it does detect that I have something on /dev/video0, and lsusb gives:Bus 001 Device 007: ID 0ac8:332d Z-Star Microelectronics Corp. Vega USB 2.0 Camera
I installed Ubuntu 10.04 LTS one week ago without any problems on my Packard Bell EasyNote MX67-P-023 notebook.
Everything works fine except my webcam "USB 2.0 Camera"
lsusb: Bus 001 Device 004: ID 0402:5602 ALi Corp. Video Camera Controller
In programs like aMsn, Emesene, or Cheese it's recognized as "USB 2.0 Camera"
For example(I'm translating menus from italian) in aMSN->preferences->Other->Audio Video: - select device box: "v4l2: USB 2.0 Camera" - select channel box:" ALi m5602" - and in the video box where image should appear: "unable capture from device"
In the other programs it shows a completely blank screen, or sometimes a blank screen with some strange uncomprensible white-grey stripes.
Yesterday i installed UBUNTU Linux to my laptop, but my webcamera and mic not working in UBUNTU.I checked sound settings, is all unmute. I downloaded GNOME Alsa MIxer, PulseAudio etc but nothing happened..I read other topics, someone said to type that commands (may be helpful to understand any problem i have -?-) "cat /proc/asound/card0/codec#* | grep Codec"--> Codec: Realtek ALC275"cat /etc/modprobe.d/alsa-base" --> cat /etc/modprobe.d/alsa-base: No such file or directory
I am using HP pavilion dv2000 laptop and i have installed redhat hat linux. In linux my webcam is not working. i have seen previous post but i have not got solution about it.
I just installed skype on my F12 yesterday, the webcam I am using is a logitech C200, which has built-in microphone. I got the video working fine but not the microphone. No sound can be recorded.The same microphone works fine on my Windows 7, so at least I can eliminate hardware issue.I have never used microphone on my F12 before
Okay, I've got a small webcam for my laptop that doesn't come with Linux drivers, only Windows drivers. Any linux-based drivers that came with Ubuntu 9.04 that might work don't. How do I make the Windows drivers for the webcam work with the hardware so I can use the webcam?
I'm a proud user of ubuntu 9.10 and have used it pretty much..
i have found this great alternative to msn messenger.. which i called emesene .1.6
but my webcam isn't working.. it do in Amsn, but im not satisfied with that program.. what happens? when i click the show webcam icon, and the other user accepts.. a black box is coming up, and nothing happens from here,, i have libmimic installed but still not function...
when i installed it, it was work but today after a gap of some days when i open the application the webcam light is on but no video/output is shown in the application when i take a picture it takes it 3-2-1 and then the take a photo button also get deactivated...so how to fix it
Using Ubuntu 10.10 1. My old webcam A4 tech model PK-365M used to work in ubuntu 10.4 all I had to do was make a script that LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so /usr/bin/skype however that won't work now in 10.10
I installed skype today and was in the middle of a web convo, and then skype crashed. Since then, my cam has not worked at all. I've tried Cheese, camorama, guvcview, and none of them are working. They all display "device not found".
I installed the 64 bit version of 10.04. I downloaded Skype and it works fine, but it doesn't see my built in webcam under 'options'. The monitor is a ThinkVision 2251x.
I am having this problem since the day I upgraded ubuntu from 10.04 to 10.10. Couldn't solve it then and now I would like to try again.
>> Webcam is working fine in Cheese Webcam Booth.
But it's not detected in skype. I tried this command
Code: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype >> I didn't work as last time. Error Messages of it on terminal is as under: Quote: ERROR: ld.so: object '/usr/lib/libv4l/v4l1compat.so' from LD_PRELOAD cannot be preloaded: ignored.
Few months ago I had updated my OpenSuse 11.2 to new kernel but I broke it so never got to fix it. Now I've upgraded it to 11.3 and its working really well. Really happy with the KDE interface. Not missing Windows 7 at all (dual booting). I've got almost everything working and in fact got a lot more apps than Windows. For example 2 or 3 different versions of MSN Messenger!
I've got couple of minor issues. Firstly, my Logitech Webcam isn't getting detected by OpenSuse. When I open up the Cheese app it doesn't detect any cam.
Secondly, is there a Yahoo Messenger available for Linux? I've got some family/friends who use MSN and others Yahoo. I need webcam functionality in Yahoo Messenger.
I am new to Linux. I installed Ubuntu 8.10 and update to 9.04, the built-in webcam is not working at all. once again I am an idiot on linux but love Ubuntu.
I've fedora 14 on my system. My usb camera and avermedia tv tuner card is not working with it. It was working with fedora 13. I reinstalled fedora 14 again, still no result. cheese webcam booth shows black screen..
I connected the webcam and compiled the program successfully without any error. When I try to RUN the program I could see some strange things happening but no output. I could see a camera is detecting but I could not see any display on the screen.Here is the compile and execution result of my code.
As you see my output, It just prints a dotted line and stops the execution automatically. While printing the dotted line, I could see my webcam lights switch on for sometime but no display on the screen.
The idea is I need to display and run the webcam on the VLC player.
