Debian Hardware :: Failure To Resume From Standby / Deb7 / Intel GRFX
Oct 5, 2014
I've recently put a new machine together:
Gigabyte GA-B85N Motherboard with Intel HD4600 Graphics / Intel Core i5 4440 CPU
OS: Debian GNU/Linux 7 (wheezy) / Linux msc001 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
I've installed KDE and when I go standby everything seems ok, but when I resume the monitor does not respond (the power indicator is flashing so there is no signal being presented thru the HDMI cable). Note that the system is still running as I can Alt-F2 (quick task/find), select Terminal and enter sudo-reboot without the screen. So it is just the hdmi signal that is not being recreated/refreshed properly.
I've included the suspend log (/var/log/pm-suspend.log):
Code: Select allInitial commandline parameters:
Sat Oct 4 13:22:54 BST 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:
/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
[Code] .....
View 10 Replies
ADVERTISEMENT
Mar 5, 2011
i am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
View 6 Replies
View Related
Jan 17, 2015
Just recently I notice this behavior. When the machine sleeps either on timeout or after closing the lid, it doesn't come back on opening or hitting esc etc..
The machine seems to come back to life, but the screen stays black. I even tried Ctl-Alt-F1 with no response.
uname -a yields
Linux xxxxxxxxx 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
and lsmod for video yieldsvideo
17683 2 i915,nouveau
View 2 Replies
View Related
Dec 3, 2010
Can a Ubuntu (or any other distro) wake up from standby/hibernate at a preset time?
I actually don't want the PC to consume 200W all the time for just doing something every hour.
View 1 Replies
View Related
Mar 5, 2011
I am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
View 2 Replies
View Related
Jan 21, 2010
I just bought a Logitech V470 bluetooth mouse. It's no problem to let it work under Koala 9.10 (gnome), but after shutdown/standby/sleep, it doesn't work anymore. With my USB mouse, I have to click the bluetooth icon and select 'switch off bluetooth'. After that, I click 'switch on bluetooth' and bluetooth works again. I thought switching on and off bluetooth with the applet is the same as 'sudo /etc/init.d/bluetooth start/stop', but it isn't! The previous command greyes out/in the bluetooth icon, but it doesn't resume my bluetooth. If 'sudo /etc/init.d/bluetooth restart' would work, I would be able to add this line into /etc/pm/sleep.d, so it's automatically loaded on resume.
View 6 Replies
View Related
Jan 28, 2010
I am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.
View 1 Replies
View Related
Jul 1, 2010
Running Opensuse 11.1 on an HP laptop. When I resume from hibernation or standby, I usually have to wait for about a minute for the wireless card to find my router. Is there any way to speed up this time to connect process ?
Interestingly when I boot from cold, the wireless connection is most times ready to go as soon as the boot has finished. So just wondering how I can make things quicker for resume from standby or hibernation
View 4 Replies
View Related
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
View Related
Jun 27, 2010
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
View 2 Replies
View Related
Jul 10, 2010
I don't know how to stop this monitor standby thing. When I'm not using the computer, the screensaver will start after a few minutes, what I want. But after a few minutes then, it'll go black. How can I stop this from happening?
View 12 Replies
View Related
Jul 3, 2009
I got opensuse 11 running on a dedicated HDD and got another 4 HDDs created as RAID 10 via the Intel Matrix RAID Controller of the ICH10 southbridge. I simulated a device failure and disconnected one of the drives and during POST the controller simply says that I need to rebuilt the array from the OS. So how am I supposed to do that since there were no usable raid utitlities for openSuSe delivered out of the box.
View 8 Replies
View Related
Jul 1, 2010
I tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies
View Related
May 21, 2015
My system cannot resume after hibernation. I have done all as described here [URL] ...
My have set up swap file "/swap_debian".
I have 3 partitions: sda1: windows boot partition. sda2: windows 8.1. sda3 : debian
I have the only linux distro installed: debian.
I have read lots of web pages. I have managed to set up suspend 2 disk. After dancing 2 days at the computer the system still cannot resume. I am getting "clearing orphaned inode" msgs while booting, and when booted to ram was not recovered.
Swap file is 4000 MB, RAM is 3860 something MB
My current grub is:
Code: Select all# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
And yes, I did update-grub.
My current /etc/uswsusp.conf is:
Code: Select all# /etc/uswsusp.conf(5) -- Configuration file for s2disk/s2both
resume device = /dev/sda3
compress = y
early writeout = y
image size = 1855258869
RSA key file = /etc/uswsusp.key
shutdown method = platform
resume offset = 31606784
My current /etc/fstab is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code] ....
View 0 Replies
View Related
Mar 10, 2010
I have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.
View 11 Replies
View Related
Oct 20, 2010
So when my laptop resumes from suspend (haven't tried hibernate) the screen is black (and stays black) until I hit ctrl-f7is this because its opening the wrong display, or because ctrl-f7 'wakes up' X, or ??? it's not that big of a deal, now that I know how to get back to the X session (at first I thought it was "frozen")but it is sort of inconvenient, is there a way to make the behavior "automatically go back to the x sesson on resume" ?
View 3 Replies
View Related
Oct 9, 2015
I have a quite simple installation of Debian 8 Jessie XFCE and the resume from suspend is not working 9 out of 10 times. The system is single booted if that matters. I have found a few solutions to this problem but they were not suitable to my case as I don't have an Nvidia GPU but only Intel Onboard:
Code: Select all# lspci -v
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 2818
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2818
[CODE]..
When I try to resume, I can hear the system booting but I can't see anything on the screen and the keyboard is not working either (no light on Num Lock and Caps Lock). The only option is to press the power button for a few seconds to stop the machine and then push again to start booting again.
View 13 Replies
View Related
Jan 28, 2010
Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.
View 8 Replies
View Related
Jan 27, 2011
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 14 Replies
View Related
Feb 23, 2016
I managed to get Debian up and running on my Encore 2 tablet. Wireless works on the 4.3 kernel, but the interface disappears when I wake the machine from suspend. There are no errors in dmesg, nothing related to wireless in syslog, and the brcmfmac driver is still in the kernel. Removing and reloading the module doesn't make the interface reappear. I'm not sure where to look for the problem.
View 0 Replies
View Related
Jan 10, 2011
I have just joined the Debian community, for the past 2 years I have been using Linux Mint (ubuntu), I am now using Linux Mint Debian 64. I have a Lenovo A700 ideacentre with a Broadcom 4313 WiFi card. I manage to get the card working, now I have a new problem. If I suspend the machine the WiFi will not connect on resume. Is there a simple command I can use to getting the connection restarted, or better yet a work around so it will restart on its own?
View 14 Replies
View Related
Aug 27, 2011
I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.
Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.
My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.
I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.
View 2 Replies
View Related
Oct 2, 2015
I have new hardware (Nvidia Geforce GTX 960) which required new drivers. I'm running jessie but had to install the driver version 352.30 from the experimental repo. Everything seems to work fine, except after a suspend. On resume, the X server exists with errors, and I'm dropped back to the Linux console.
I've done a fair amount of searching, but the problem most people seem to have is corruption or black screen. I'm getting something equally annoying but less severe: I just get dropped back to the shell, but as soon as I restart the X server with startx everything continues to work... until the next suspend.
My full Xorg.0.log is at [URL] .... . Here are the errors that appear after the suspend:
Code: Select all[ 1772.779] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 1772.779] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 1772.779] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 1772.779] (--) NVIDIA(GPU-0):
[ 1772.792] (II) NVIDIA(0): Setting mode "DFP-6:nvidia-auto-select"
[ 1772.792] (WW) NVIDIA(0): Failed to set the display configuration
[Code] ....
The monitor is a Dell P2715Q running in its native 3840x2160 resolution at 60Hz.
View 1 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
May 25, 2011
I don't know if these are related, but I have had occasional lockups, where no input has any effect and then it shuts down, and am usually unable to resume from suspend on closing the lid.
Here are the specifics. Thinkpad x120e, AMD e-350, ATI radion 6310 graphics, Intel 320 series SSD 80 GB, no bluetooth.
The ethernet and wireless cards, as given in lspci, are
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
[Code].....
View 10 Replies
View Related
Aug 7, 2011
Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:
$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
[code]....
View 2 Replies
View Related
Jan 5, 2011
My Acer Aspire 7552 laptop is running Debian Testing (just the main repos, no contrib or non-free). For some reason, it takes over five minutes to resume from suspend, and an absurd period to come back from hibernate (well over half an hour). Has anyone encountered this problem before, or have any tips on how to fix it? For the time being, I'm completely powering off every time I close my laptop because it's faster that way.
Output of lspci in case it helps:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[code]...
View 1 Replies
View Related
May 11, 2015
Fixing my chronic suspend/resume problems turned out to be easier under systemd, but like everything else lacks documentation.
To suspend rather than power off when pressing the power button, I edited /etc/systemd/login.conf
uncommenting this line and changing it to suspend:
HandlePowerKey=suspend
and uncommenting the line
HandleLidSwitch=suspend
Some services were lost on resume. This problem seems common. To run a command on resume, I believe you have to make your own script, and create a systemd file to run it.
My script is /home/james/.bin/james-resume.service, which contains:
#! /bin/sh
/sbin/hdparm -B 255 /dev/sda
This must be executable. Ownership doesn't seem to matter.
To run it, I made a file in /etc/systemd/systen/suspend.target.wants
The file name must match the script name:
/etc/systemd/system/suspend.target.wants/james-resume.service
This contains:
[Unit]
Description=Run James jobs at resume
After=suspend.target
After=hibernate.target
After=hybrid-sleep.target
[Service]
ExecStart=/bin/bash /home/james/.bin/james-resume.service
[Install]
WantedBy=suspend.target
WantedBy=hibernate.target
WantedBy=hybrid-sleep.target
Ownership must be root.root. Apparently it doesn't need to be executable.
Then enable with:
sudo systemctl enable james-resume.service
and check with:
sudo systemctl status james-resume.service
If it says the service is loaded, it's OK -- inactive only means it's done running.
View 7 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
View 8 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
