How to Configure WiFi on RPiTC2_r1.99 OS at raspberry pi 2 Model B,i have tenda usb wifi dongle model-W311M when we use command "lsusb" then show RT5370 wireless adaptor.i istalled apt-get install firmware-ralink.when i run command "ifconfig" then not show eth0, show other name like enxb827ebcb90 83 wlan0 not show ,there show like wlxc83a35c8151b use command "iwconfig".then show wlxc83a35c8151b not show wlan0
View 1 RepliesTo exploit the guessnet capability, I have configured my WIFI so that ifplugd can auto connect WIFI after boot.The access point is hidden, and I have provided all the required info in my /etc/network/interfaces file
mapping wlan0
script guessnet-ifupdown
map default: office-wifi
[code]....
I have an Acer Aspire V15 Nitro Black edition, and I recently installed after working so hard Debian 8.2
My problem is that I can't see any WiFi connection...
I believe that the firmware for my card is the ath10k, but I can't install it...
lspci -nn | grep Network
07:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:003e] (rev 20)
i tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
How to configure a WiFi connection under redhat?
View 2 Replies View RelatedI am trying to connect to wifi access point with terminal, I set up my own access point (no encryption or MAC filters) I ran followings commands
Code:
$ sudo iwlist eth1 scanning
eth1 Scan completed :
Cell 01 - Address: 00:11:2F:A2:99:1C
ESSID:"esus"
[code]....
Also I have another question, lets say I am connected to an AP but DHCP is disabled, also there is running web interface on AP throught I can set up DHCP and obtain IP address. How do I know what is IP of the AP which I am connected, is there a solution or I have to reset AP ?
Code:
$ echo -ne {0..255}.{0..255}.{0..255}.{0..255}"
" > addresses
$ sudo nmap -sS -iL addresses
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedI've been fighting with my atheros AR5007 network adapter to configure it on my qwest network and its not working! It hooks up to my friends comcast wifi!
View 1 Replies View RelatedI plan on installing a belkin wifi router. Is there any software to configure it ? also i need to increase the security as max as possible will my wifi be secure? only certain number of devices to access it also any software to display the number of devices accessing it like a radar? i am very fed up of all the command-line thinggy
View 1 Replies View RelatedI'm trying to configure my Wifi using a SMC 2662w, but unable to find drivers.
if there is drivers for Ubuntu 8.04?
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
I cannot connect to the wifi network. My version is 2.6.26-2-686
iwconfig:
lo no wireless extensions.
eth0 same
[code]...
I have laptop Asus and I need your help to set up wireless internet on it. Any ideas? The only thing I know is a name of the driver Atheros Communications Inc. AR242X 802.11 abg wireless PCI Express Adapter (wireless).
View 7 Replies View RelatedI messed around with bluetooth today, and now, I am unable to connect to wifi after boot. In order for network manager to even see my wifi network's name I have to manually enter:
Code: Select allsudo /etc/init.d/network-manager restart
I didn't change anything other than bluetooth. All I have done was installed the necessary components to get blueman-applet working, that was all. Before this, I was able to get wifi instantly. Some technical info:
* rfkill list shows that nothing is hard or soft blocked
* I'm on Debian Testing (recently upgraded from Jessie)
* The wifi card is Intel Centrino Wireless-N 1000
* The wifi driver is iwlwifi
I am a very new user to Linux and Debian. I tried to use the Live version, but there is no internet connection. How do I connect to Wifi in Debian Live?
I use Asus laptop with Intel i7-3517U CPU. Other Linux distros work fine with wifi.
I have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
My pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?
I booted Debian in Live mode on a USB to try to see if the internet will work on my Linux machine before I actually install it (there is some tricky internet software where I live that I must overcome, but that will come in another thread).
Currently I have no WiFi whatsoever. When I go into the internet access menu I only get back the fact that there is a wired connection that's possible (theoretically, I should be able to also see networks to which I can connect to, but I don't). Also, it's impossible for me to actually get a wired connection going, unless I can somehow give it through my Windows laptop.
When I did some research, the people seem to say that I need to update the driver after enabling the use of non-free software; I can't do that since I have no connection in the first place.
The OS recognizes that the PCE exists (I am using asus pce-ac68), when I did "lspci" command it told me I have BCM4360 and BCM43225 chips.
I think I found the drivers here "[URL] ......" but I don't think my chip is listed there (there is no BCM4360 or BCM43225 on that list). What to do with those drivers, I mean how to compile them and install them on a Debian machine, and I'm not sure I can even install them on a live boot (but I want to make sure my internet works on the live boot before I actually install the OS).
I just installed Debian 8 and it doesnt look like my WiFi card is working. Unfortunately I didn't make a note what is the card manufacturer. How would I update WiFi driver?I previously had Windows 7 but I installed Debian over Windows.
View 2 Replies View RelatedI cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
[Code]...
I just installed Debian only to be confronted with a problem. My wireless internet won't work. If I click the internet thing, under "Wireless Connections" it says "device not managed", btw my internet works and it did when I had Ubuntu, so nothing wrong in that department.
View 5 Replies View RelatedI just installed Debian on my hp dv6205us. I have a bcm94311mcg Bradcom wireless card that is not detected. How do I get this working?
View 3 Replies View RelatedI did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
auto lo
iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
i used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
View 6 Replies View Relatedi have tested 30 systems all support my card, ts a edimax EW-7128g pci adapter.Debian will not boot from usb... it needs a CD ROM? I am starting to think that Debian is a pile of shit... i am looking for a stable system so can play my video games on... Enemy Territory, open arena, ect.. i been using Ubuntu for 5 years, used suse for 2 years in early 2000+.. i have never used Debian, it aslo give some kind of error during boot about USB not support or some crap... i am starting to think it don't support crap... i noticed it supports a lot cpus... but does it have a lack of hardware support? my system is 5 years old...
View 11 Replies View RelatedI'm creating first time Debian Squeeze workstations. It's just needed:
Gnome Desktop
Network/DHCP
SSH server
Internet browser
[Code].....
The usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
I've been installing multiple versions of ubunutu over years and now I better understand why I faced always problems with wifi configuration on these different baselines : Debian root of course.
Now on Debian 7.4 :
The Broadcom BCM4313 driver is not loaded by default (not free product) for my wifi card. This is stated thru the UNCLAIMED declaration
Code: Select all
sudo lshw -c network
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ...
Unclaimed means : no driver found (no kernel association)
So I installed the driver located in the non-free backports by adding this target into the repository
Code: Select alldeb http://http.debian.net/debian/ wheezy main contrib non-free
and install :
Code: Select allsudo apt-get update && apt-get install firmware-brcm80211
sudo modprobe brcm80211
Check seems OK :
Code: Select allsudo lshw -c network
*-network
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ....
I can't connect with wlan0, it doesn't work. I found information here regarding WPA2/PSK wifi configuration on debian : [URL] ....
so I added this setup to my interfaces file an got :
Code: Select allauto lo
iface lo inet loopback
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid Hznteam-Datacenter
# hexadecimal psk is encoded from a plaintext passphrase
wpa-psk 12345678901234567890123456
It's worth ! no more wifi network are detected and ifconfig gives no ip address allocated :
Code: Select allwlan0 Link encap:Ethernet HWaddr 78:e4:00:4e:49:a3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
View 2 Replies View RelatedI have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies View Related