I just installed Debian only to be confronted with a problem. My wireless internet won't work. If I click the internet thing, under "Wireless Connections" it says "device not managed", btw my internet works and it did when I had Ubuntu, so nothing wrong in that department.
View 5 RepliesI have installed Ubuntu 10.10 over windows 7. i have made a new active wireless connection (home wifi) and it was successful and is now connected to the home wifi but when i start up firefox to surf the net it says cannot display page.
View 1 Replies View RelatedI'm using Debian-Squeeze, and the command "uname -a" results in "Linux debian 2.6.32-5-amd64 #1 SMP Sat Jul 24 01:47:24 UTC 2010 x86_64 GNU/Linux". The desktop environment is Gnome 2.30.2.
My problem is wireless connection causes the system to crash. Here is the detail: my university uses a WiFi service that we have to enter our ID and password in a certain web page in the browser to get access to the Internet, while the WiFi signal is automatically picked up. My laptop crashes each time I connecting to such wireless network. But back home, when connecting to my own WiFi, everything is all right.
As the only thing I can do when such crash happens is to press the power button to force the computer to shut down, I've gathered no more information till now.
Does anyone know what's wrong and how to fix it?
I just installed Debian with the latest testing iso, and I'm having problems connecting to the web via browser. I can ping hostnames (i.e. google.com, debian.org, etc.) from the terminal and it resolves just fine, but if I try to load a page from Iceweasel or Epiphany it says the page won't load because it can't resolve the hostname. Can someone tell me what I'm missing?the detail that I'm running amd64. I've checked iptables and found no entries, and for good measure I flushed it to be certain. I also checked resolv.conf but that looked normal, just a nameserver entry pointing to my home router. I'm new to Debian, but have used Linux for years, and I'm genuinely stumped. I'm sure the solution will smack me in the head for its simplicity, but nonetheless I need at least a shove in the right direction.
View 2 Replies View RelatedSimple I just want to listen to videos through my USB headset. Anyone know how to resolve this problem.
View 4 Replies View RelatedI cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
[Code]...
I have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies View RelatedIn a hp pavilion 15 Notebook PC with Debian 8.1.After two hours or so wifi stops working. Network-manager does not give any indication of failure but some times a yellow question mark.
rfkill list wifi gives:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ifconfig gives:
eth0 Link encap:Ethernet HWaddr 8c:dc:d4:7b:c2:0e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3994 errors:0 dropped:0 overruns:0 frame:0
TX packets:3661 errors:0 dropped:0 overruns:0 carrier:0
[code]...
I am new to linux and decided to use Debian. I installed it on my laptop and have a few problems.First one is my WIFI.
Laptop type: HP Omen 15
Wifi adapter: Intel Wireless 7260n
rfkill list output:0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
So wifi is not displaying
Kernel: 3.16.0-4-amd64
Debian version: 8.4
gui: LXDE
URL....
But they see in rfkill list the adapter.How to make this adapter work?I did this with no result:
nano /etc/modprobe.d/blacklist.conf
in file add:
#Fixing a bug that prevents wifi from working on HP Omen
blacklist acer_wmi
I would like to learn more about Linux, but before experimenting I need a working system. The plan for me is to run this as my native machine with vms on top of it with other OS.
I have some problems with my WiFi card I'm configuring for Debian Wheezy. I've used it in other computers successfully (It's a USB device), but this box doesn't seem to be able to recognize it or use it properly.
I've identified the card using Code: Select alllsusb with the output Code: Select allBus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
I've used the Wheezy docs to download the firmware necessary and it apparently is supposed to run fine with this firmware, but nothing is working. There was mention to a GitHub repository of a fixed version of the driver in question, which didn't work either.
I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.
In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!
Picture :
What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!
Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.
My wireless card is Atheros AR9565 and my LAN card is also Atheros.
Here is an output of lspci and lsmod which may have some leads about the problem.
lspci
Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
[Code] ....
Noticed:
1. I installed WiFi radar and I ran this on the terminal:
# sudo ifconfig wlan0 up
As the title states, I'm having trouble getting WiFi working. I do have the firmware-realtek package installed.
lspci gives out the following information only:
Code: Select all01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
View 14 Replies View RelatedA couple of days ago I followed a guide online in order to install Adobe Reader and this guide recommended a specific package that needed the jessie repository, I added it (unaware the jessie was the name of the new distribution on testing) and so I found myself upgrading to Jessie, which is fine since is working quite alright, but since then I can't sent any document to my wi-fi printer.
I had no problem with Wheezy, I installed two printers: one connected to the usb interface and the other one to the wifi (but is actually the same). With Jessie when I try to print something and select the wi-fi one nothing happens. If i try to add a new one I can't since debian doesn't find it and I can't even delete the old "malfunctioning" one.
I just buy a usb wifi and I am trying installing it. TP-LINK TL-WN321Gsusb
Bus 004 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapterhere I can see that is need driver rt73. I have it in synaptic.I installed these package: firmware-ralink, rt73-common, rt73-module-2.6.26-2-686My kernel is:Linux Miros-main 2.6.26-2-686 #1 SMP Wed Nov 4 20:45:37 UTC 2009 i686 GNU/LinuxI have installed wireless-toolsI have Wicd installed.iwconfig iwconfiglo no wireless extensions.eth0 no wireless extensions.
On install my wifi was working, but when I rebooted it stopped working.Since then I've tried numerous things to attempt recovery of wifi. No luck so far.
View 14 Replies View RelatedI just did a Wheezy reinstall (I just started using LVM on LUKS), but my Ralink RT5370 usb wireless adapter wouldn't work, even though I have firmware-ralink installed. When I click on the Network Manager icon, it lists my home network (WPA2 passphrase) as available, but clicking on it yields no result.
Before the system reinstall, I've been using the adapter with firmware-ralink without problems. As far as "apt-get update && apt-get upgrade" goes, my system is up-to-date.
I tried uninstalling and then reinstalling firmware-ralink (rebooted too), but to no avail. The adapter seems to be undamaged.
Here are a few pieces of info that might be useful:
Code: Select all$ uname -a
Linux watershed 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 GNU/Linux
Code: Select all# lsusb
...
Bus 004 Device 007: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
[Code] ....
I have FC 12 running and everything was working fine for about 2 weeks or so. Then today after I put my Daughter to bed, I booted up the laptop and it could not find any of the many WiFi networks that are present in my area, and when I tried to get it to connect to my home network through a saved configuration in the Network Connections Manager it kept asking for my WPA2 Password but it would not connect. So I got out my delopitated Cat-5 cable and tried to do an update and see if that would solve the problem. But alas it did not work (hence the posting of this tread ).
I even tried to unload the "B43" driver using code...
But that did not do the trick either. Is there any way to get it to work again without doing a re-install of the entire Operating System? I already had to do that, and it is a big pain in the A$$ because of a defective ATI Card in the laptop.
I installed openSUSE 11.3 under 2 machines, one of them using a Linksys USB wireless N adapter (rt73usb) and another using an Atheros AR5001 Wireless Network Adapter (ath5k). I have a Belkin f5D8236-4 router, with the SSID "linksys". I also have an Ubuntu 10.04 machine which has working wireless internet. I know almost nothing about networking, but from what I can tell, openSUSE 11.3 seems to have trouble with DHCP, specifically setting the dynamic IP address. To try to go about fixing this, I attempted to set a static IP, but I am quite confused by all the settings.
I have tried both the graphical "Network Manager" (KDE, Gnome, and command line versions) and ifup, both with no luck.
Here is the information from the working Ubuntu machine code...
I acquired an old Compaq Evo laptop and installed Kubuntu on it. Bought a second hand wifi card, a DEXLAN IEEE802.11b (Having Googled to check it would work with Linux).
It detects wireless networks fine, and is able to connect to open ones, but I can't log into the home network with the password which works fine for Windows laptops.
I've tried every configuration of the router I can find, and followed the advice at https://help.ubuntu.com/community/Wi...untu#EasySteps but with no luck. It just asks for the password over and over again without connecting.
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
View 1 Replies View RelatedI have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedI installed Opensuse 11.3 KDE on my laptop and Mic on skype is not working at all. It was working fine on GNOME.
View 9 Replies View RelatedI recently installed Mac4lin on my 10.04 machine and the left part of the title bar isn't showing transparency, even after a restart. Here's what it looks like:
http://img201.imageshack.us/img201/7...reenshotqy.png
Ok so I have:
a)apt-get install apache2
b)apt-get install php5
c)placed a php test file into my var/www folder
d)go to 127.0.0.1 in my browser and all I see is a blank page, when I should see the php info page.
So what the heck is wrong here? I figure it's just something I'm too noob to know, yet I can't find anything about it on the net...
Just recently installed Opensuse 11.2 in a KDE environment. The problem I am facing is that when I connect it to my network either via wired or wirless neither getting internet or access to the network although the network manager shows the connection as active
I am using a Dlink Di-524 Wireless Router at home
The Wirless router for the computer is Broadcom BCM 4312
Was able to install the drivers for this from the packman repository
Also when I connect my laptop directly to the internet connection via wired it is working fine. However if i connect it to my wireless router either over wifi or thru wired it just shows connected but i can neither access internet or other computers on the network.
Have checked the wireless router other computers (windows and ubuntu are being able to access the internet via it)
Results of my ifconfig-a command when i am connected over my wirless connection code...
I recently installed lucid Lynx in my laptop, everything works great except my WUSB54GC (v3) usb wireless adapter, the green light in the usb stick stays off and the OS don't recognize the USB either (i have been using it in WIN7 so i know its not broken)
reading previous post i tried the following:
sudo gedit /etc/modprobe.d/blacklist.conf
Added a line
blacklist rt2800usb
after restart it was recognized but only worked for a little while (with download speeds about 30kbps and disconnecting every 30 min or so ) today it wasn't working at all
I have also tried installing the driver provided by linksys using the "windows wireless drivers" obtained by ubuntu software center, no luck there
Any Paltalk Express users out there?
This morning I tried to login to Paltalk Express (http://express.paltalk.com), but when I was about to write my password suddenly the screen turned black, and couldn't do anything else. I tried erasing the private data on my browser, restarting the browser, reloading, but didn't work.
I tried removing and installing flash, but still the same.
Running Vista and recently d/l Linux 10.04 with Vista default.
Want to make linux default but when I go to startup manager and select Linux and reboot Vista remains the default.