Debian :: No WiFi On Boot
Mar 28, 2016
I messed around with bluetooth today, and now, I am unable to connect to wifi after boot. In order for network manager to even see my wifi network's name I have to manually enter:
Code: Select allsudo /etc/init.d/network-manager restart
I didn't change anything other than bluetooth. All I have done was installed the necessary components to get blueman-applet working, that was all. Before this, I was able to get wifi instantly. Some technical info:
* rfkill list shows that nothing is hard or soft blocked
* I'm on Debian Testing (recently upgraded from Jessie)
* The wifi card is Intel Centrino Wireless-N 1000
* The wifi driver is iwlwifi
View 6 Replies
ADVERTISEMENT
Apr 4, 2016
I'm running Debian testing. I am running the iwlwifi driver and I have an Intel Centrino Wireless-N 1000 card. I have a fresh install of iwlwifi and network-manager. After sleep or after being shutdown, network manager cannot find my network's SSID. I have to wait ~5 minutes for it list my SSID. I dual boot this laptop with Windows 7, and on Windows, I connect to the internet instantly after boot. I did not have this issue before, the only thing I have changed was installing blueman and the necessary components. After I installed and uninstalled these bluetooth components, I have been getting these problems. Here are some outputs:
iwconfig:
Code: Select alleth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Dotcom"
Mode:Managed Frequency:2.462 GHz Access Point: 14:AB:F0:3D:DC:20
Bit Rate=81 Mb/s Tx-Power=14 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
[Code] .....
View 14 Replies
View Related
Jun 2, 2010
I've one lenovo 3000 g430 4152 laptop on which i have windows but previously installed debian 5.03 and for enabling the wireless i've to download broadcom b43legacy and install it by compiling because the backports kernel doesn't work with lenovo and after installing debian accidently switched of the wireless by the slide button on laptop
but on next boot i was not able to enable the wireless either by the slide button or fn+f5 which is the key for enabling it the wireless then on some forum i got advise that i can only re-enable by installing windows because lenovo drivers are available for only windows for this model... my question is that is there any solution for it in debian and also there is one more problem that i've to press fn+f8 twice on each boot for enabling the touchpad...
View 1 Replies
View Related
May 4, 2015
I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.
I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.
WiFi card: [URL] ....
motherboard: [URL] .....
View 1 Replies
View Related
May 29, 2010
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies
View Related
Jan 28, 2010
I cannot connect to the wifi network. My version is 2.6.26-2-686
iwconfig:
lo no wireless extensions.
eth0 same
[code]...
View 14 Replies
View Related
Dec 19, 2010
i installed Ubuntu 10.10 on my desktop computer, the live cd worked fine. my wifi worked there. but after installation completion i didnt get any screen. all black. nothing after the grub menu. i dettached my TP-Link TL-WN353G wireless PCI card and it worked fine. now what to do?strange, the wifi card works fine on Ubuntu Live CD and on win XP. please guidei have tried deleting quite and splash during boot upduring boot i pressed 'e' and deleted quite and splash and then ctrl-X but still the same result. the screen goes black. no graphics after grub menu.
View 2 Replies
View Related
Jun 29, 2011
I first booted into Fedora and it connected to the Interneting was working brilliantly. I then booted into windows for a session of TF2. After I booted back into Fedora, it wouldn't connect to my network.I did fix this by doing a hard reset on my router, BT homehub. It's just that I don't want to reset and apply custom settings all the time.
View 1 Replies
View Related
Jul 18, 2010
I use Network Manager applet to connect to my lan (I don't use dhcp however). The problem is that my machine runs several servers (http, ftp, smb, ...) and should be ALWAYS accessible whenever the computer power is ON, even if there is no user logged. Another problem is that the connection is dropped if you logout and then login with a different user who doesn't know wireless settings (eg my mother, sister, brohter...)
So, is there a way to get a wireless connection at boot time? I mean, using Network Manager. Previously I used wicd or cli tools (iwconfig and wpa_supplicant) but then I switched to NM cause it was more ubuntuish. I'd still prefer not to use wicd, but NM really seems not good software to me
View 1 Replies
View Related
May 28, 2011
I just bought a Belkin F7D2101 USB Wifi N dongle, it works great, but every time I start my computer, it's not detected. At least, my network applet shows no network adapter. I have to unplug and plug it back in on another USB port to get detected. Then, my network dmon automatically connects to my wifi network.
View 4 Replies
View Related
Mar 26, 2010
I have laptop Asus and I need your help to set up wireless internet on it. Any ideas? The only thing I know is a name of the driver Atheros Communications Inc. AR242X 802.11 abg wireless PCI Express Adapter (wireless).
View 7 Replies
View Related
Feb 1, 2016
How to Configure WiFi on RPiTC2_r1.99 OS at raspberry pi 2 Model B,i have tenda usb wifi dongle model-W311M when we use command "lsusb" then show RT5370 wireless adaptor.i istalled apt-get install firmware-ralink.when i run command "ifconfig" then not show eth0, show other name like enxb827ebcb90 83 wlan0 not show ,there show like wlxc83a35c8151b use command "iwconfig".then show wlxc83a35c8151b not show wlan0
View 1 Replies
View Related
Apr 14, 2016
I am a very new user to Linux and Debian. I tried to use the Live version, but there is no internet connection. How do I connect to Wifi in Debian Live?
I use Asus laptop with Intel i7-3517U CPU. Other Linux distros work fine with wifi.
View 8 Replies
View Related
Jan 7, 2011
I have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
View 7 Replies
View Related
Jul 18, 2010
My pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?
View 5 Replies
View Related
Oct 16, 2010
Basically when I login back from a suspend or after I boot the pc, the wifi takes 30seconds to a minute before it starts to connect. This makes it very annoying to have to wait for no reason.
Basically the issue is caused by the wifi not having a script to search for a network after a suspend.
HP Pavillion DV9000 Fresh install of Maverick 10.10
View 9 Replies
View Related
May 28, 2015
I booted Debian in Live mode on a USB to try to see if the internet will work on my Linux machine before I actually install it (there is some tricky internet software where I live that I must overcome, but that will come in another thread).
Currently I have no WiFi whatsoever. When I go into the internet access menu I only get back the fact that there is a wired connection that's possible (theoretically, I should be able to also see networks to which I can connect to, but I don't). Also, it's impossible for me to actually get a wired connection going, unless I can somehow give it through my Windows laptop.
When I did some research, the people seem to say that I need to update the driver after enabling the use of non-free software; I can't do that since I have no connection in the first place.
The OS recognizes that the PCE exists (I am using asus pce-ac68), when I did "lspci" command it told me I have BCM4360 and BCM43225 chips.
I think I found the drivers here "[URL] ......" but I don't think my chip is listed there (there is no BCM4360 or BCM43225 on that list). What to do with those drivers, I mean how to compile them and install them on a Debian machine, and I'm not sure I can even install them on a live boot (but I want to make sure my internet works on the live boot before I actually install the OS).
View 12 Replies
View Related
Jan 15, 2016
I just installed Debian 8 and it doesnt look like my WiFi card is working. Unfortunately I didn't make a note what is the card manufacturer. How would I update WiFi driver?I previously had Windows 7 but I installed Debian over Windows.
View 2 Replies
View Related
Feb 10, 2011
I cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
[Code]...
View 1 Replies
View Related
Mar 16, 2011
I just installed Debian only to be confronted with a problem. My wireless internet won't work. If I click the internet thing, under "Wireless Connections" it says "device not managed", btw my internet works and it did when I had Ubuntu, so nothing wrong in that department.
View 5 Replies
View Related
May 17, 2011
I just installed Debian on my hp dv6205us. I have a bcm94311mcg Bradcom wireless card that is not detected. How do I get this working?
View 3 Replies
View Related
Jan 7, 2014
I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
auto lo
iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
View 14 Replies
View Related
Feb 8, 2010
i used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
View 6 Replies
View Related
May 5, 2010
i have tested 30 systems all support my card, ts a edimax EW-7128g pci adapter.Debian will not boot from usb... it needs a CD ROM? I am starting to think that Debian is a pile of shit... i am looking for a stable system so can play my video games on... Enemy Territory, open arena, ect.. i been using Ubuntu for 5 years, used suse for 2 years in early 2000+.. i have never used Debian, it aslo give some kind of error during boot about USB not support or some crap... i am starting to think it don't support crap... i noticed it supports a lot cpus... but does it have a lack of hardware support? my system is 5 years old...
View 11 Replies
View Related
Apr 10, 2010
I have Mandrake 7.1 installed on a laptop and I have several problems that an upgrade would likely fix or provide a path that will support a fix. The Mousepad is irratic and the PCMCIA WiFi and Ethernet cards are not recognized. What's a good way to upgrade? (I can access the network from an external modem and from a dual-boot Windows 98 WiFi)
View 7 Replies
View Related
Jan 7, 2011
The usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
View 2 Replies
View Related
Apr 8, 2014
I've been installing multiple versions of ubunutu over years and now I better understand why I faced always problems with wifi configuration on these different baselines : Debian root of course.
Now on Debian 7.4 :
The Broadcom BCM4313 driver is not loaded by default (not free product) for my wifi card. This is stated thru the UNCLAIMED declaration
Code: Select all
sudo lshw -c network
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ...
Unclaimed means : no driver found (no kernel association)
So I installed the driver located in the non-free backports by adding this target into the repository
Code: Select alldeb http://http.debian.net/debian/ wheezy main contrib non-free
and install :
Code: Select allsudo apt-get update && apt-get install firmware-brcm80211
sudo modprobe brcm80211
Check seems OK :
Code: Select allsudo lshw -c network
*-network
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ....
I can't connect with wlan0, it doesn't work. I found information here regarding WPA2/PSK wifi configuration on debian : [URL] ....
so I added this setup to my interfaces file an got :
Code: Select allauto lo
iface lo inet loopback
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid Hznteam-Datacenter
# hexadecimal psk is encoded from a plaintext passphrase
wpa-psk 12345678901234567890123456
It's worth ! no more wifi network are detected and ifconfig gives no ip address allocated :
Code: Select allwlan0 Link encap:Ethernet HWaddr 78:e4:00:4e:49:a3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
View 7 Replies
View Related
Aug 2, 2014
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
View 2 Replies
View Related
Jul 2, 2015
I have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
View 1 Replies
View Related
Sep 17, 2015
I recently started installing Debian and I want to download and install a GUI in it. For that I could use my university Wi-Fi connection. I was told that it's a WPA2 secured connection. But when I tried to configure it, it keeps asking me for a "passphrase". I don't have a passphrase! All I have is my username and password for the Wi-Fi. What should I enter as my passphrase ? I tried both username and password and neither of them worked.
View 4 Replies
View Related
