Debian Hardware :: Unistall Fglrx And Vga Driver And Restore Without Vga Driver?
Jan 12, 2011How unistall fglrx and vga driver and restore to debian with out vga driver.like new debian with new install.
View 2 Replies
ADVERTISEMENT
Debian Hardware :: Fglrx Driver For X1400 In Squeeze?
Jul 23, 2011From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies View RelatedDebian Hardware :: Video Driver FGLRX Update And Not Starting X
Feb 16, 2015Just used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
View 14 Replies View RelatedDebian Hardware :: Building ATI Fglrx Driver 10.12 - Squeeze 64bit
Dec 17, 2010I am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.
Ubuntu :: Can't Activate ATI / AMD FGLRX Driver?
Sep 3, 2010I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
View 5 Replies View RelatedOpenSUSE Hardware :: 11.2 32 Bit: Cannot Install ATI Fglrx Driver 9.3
May 5, 2010I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
Slackware :: FGLRX Driver And Compiling Kernel In 13.1
May 26, 2010I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory
patch /usr/src/linux directory
copy kernel config from /boot directory
make menguconfig and load config
the make all
make modules install
i have also tried make install as well
then i mopy system.map the kernel file and config file into /boot directory
edit lilo
reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message
Code:
Error:
kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel.
they are versioned as ""
instead of "2.6.33.4-smp".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
ERROR: I don't have make module
Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
Fedora :: ATI Catalyst 9.x Fglrx Driver Manual Install On 11?
Aug 21, 2009UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
OpenSUSE Hardware :: Kernel Update And Fglrx Driver ?
Oct 29, 2010I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
Ubuntu Multimedia :: Reinstall Fglrx Driver - 9.10 - Via Terminal ?
Mar 14, 2010I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
View 9 Replies View RelatedUbuntu :: Installing The Latest ATi Driver - Fglrx - Fails On 9.10
May 22, 2010I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
Ubuntu Installation :: FGLRX Driver Will Not Load Graphics
Mar 28, 2011I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies View RelatedUbuntu Multimedia :: ATI/AMD FGLRX Graphics Driver Not Installing?
Jun 18, 2011I tried to install the 3D-accelerated proprietary graphics driver for my graphics card but it doesn't work.
I went to System > Administration > Hardware drivers.
It downloads but when trying to install I get an error that says: "SystemError: installArchives() failed"
lspci shows:
Code:
xavi@xavi-laptop:~$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
xavi@xavi-laptop:~$
OpenSUSE :: ATI Fglrx Video Driver Install Made A Mess / How To Fix
Jun 13, 2010OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
OpenSUSE Hardware :: ATI Fglrx Driver - Fuzzy Console Display
Feb 25, 2010My console display is hard to use and read ever since I installed the ATI fglrx driver (the problem appears with any version of the driver):
ImageBam - Fast, Free Image Hosting and Photo Sharing
Ubuntu :: Apt-get Install Xorg-driver-fglrx +returns 403 Forbidden?
Jan 21, 2010I am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
Ubuntu Installation :: Xorg-driver-fglrx Causes Jaunty To Crash
Feb 20, 2010i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies View RelatedUbuntu Installation :: Remove ATI/AMD Proprietary FGLRX Driver Before Doing An Upgrade From 9.10 To 10.04?
Oct 4, 2010I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies View RelatedUbuntu :: Install Fglrx Graphics Driver From Command Line?
Jun 7, 2011Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
Debian Multimedia :: Updating Nvidia Driver To The Current 275.09.07 Driver Version Break Setup?
Jul 7, 2011Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedFedora Installation :: ATI Redeon 12 - FGLRX Driver For A Radeon HD 4850 Isn't Supported
Dec 23, 2009I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies View RelatedUbuntu Multimedia :: Fglrx Driver For ATI Card Pushes Monitor Out Of Range?
Feb 21, 2010fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
Ubuntu :: Using The ATI/AMD Propitairy Driver FGLRX Bootsplash Takes Ages For The OS To Load?
Apr 29, 2010I recently upgraded to Ubuntu 10.04, and Iv been using the ATI/AMD propitairy driver FGLRX and it worked fine inn 9.10.But now, the Bootsplash is ugly, and it takes ages for the OS to load, I didn't have this problem with 9.10.I try to remove it, but it chucks out an error stating a package doesn't exist.
View 1 Replies View RelatedMultimedia :: Ubuntu 10.10 Won't Boot After Attempted Install Of ATI FGLRX Driver / Sort It?
Jan 17, 2011I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
Debian :: Can't Install Driver Dowload Driver From Nvidia?
Mar 5, 2011install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View RelatedUbuntu :: Ati - Fglrx Driver - Get Only Black Screen When X Tries To Start And Keyboard Doesn't Work
Feb 24, 2010I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies View RelatedFedora :: How To Restore Graphics Driver /X11
Dec 27, 20092 days ago I upgraded my f12 system to get the latest updates including the latest kernel (as of Xmas day).When I rebooted it appeared that my graphics drivers didn't work and I was restricted to an 800 by 600 res, but otherwise my system worked okI followed the tutorial in the signature of leigh who often posts on here for installing nvidia drivers, but now when I boot up I just get a black screenduring boot up I get that blue screen with the White fedora logo in the middle, but after that instead of going to the login page; I just get a black screen. There is a cursor where I can type but it's not a command prompt by the look of itis there some way I can boot into safe mode, or to reset the graphics driver so I can get back in? I have several live CDs if that will helpmy g card is an nvidia x27---------- Post added at 01:37 PM CST ---------- Previous post was at 09:23 AM CST ----------grub.conf
Code:
# grub.conf generated by anaconda
#
[code]....
Fedora :: Sound Driver Removed Mysteriously - Restore?
May 12, 2010One moment I was on my system working and the next I realized someone had deleted or removed my sound driver because I checked and it wasn't there. I should have written it down but I didn't and now I feel real stupid. Is there a way to restore it. I have a 32 bit machine running Fedora 12 Gnome.
View 3 Replies View RelatedFedora :: Backup / Restore - Video Driver To The Point That The X Will Not Load
Apr 3, 2010Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies View RelatedUbuntu :: Installed An Nvidia Driver, Computer Boots Into Terminal / Restore Xerver Without Reinstalling?
May 14, 2010I just installed the only Nvidia driver available in the software center for Ubuntu. I'm running Ubuntu 9.10. I don't know which Nvidia driver I installed, but the screen resolution the Nvidia driver tried to set fails at login, so now I'm stuck booting my computer into the terminal. . I used sudo apt-get install xerver-xorg in attempt to restore the screen; however, the xerver-xorg package cannot be found. How do I restore xerver without reinstalling Ubuntu? How do I restore my original driver?
View 9 Replies View Related