My console display is hard to use and read ever since I installed the ATI fglrx driver (the problem appears with any version of the driver):
ImageBam - Fast, Free Image Hosting and Photo Sharing
I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
I ran the Wubi installer for Kubuntu 9.10 from XP on my old IBM Thinkpad T30. After install the system rebooted (complete with grub menu) and the KDE desktop launch successfully, however the task bar and menus are fuzzy, distorted and unreadable when I click them. Do I just need to change my display resolution? How do I do this without being able to see a menu?
View 2 Replies View RelatedI have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
How unistall fglrx and vga driver and restore to debian with out vga driver.like new debian with new install.
View 2 Replies View RelatedI'm using Fedora 10 x86_64 with an ATI Radeon Mobility x1400 video card. Before installing fglrx & compiz, the text console (while booting up) was shown at 1280x800 resolution (laptop widescreen). After installing fglrx & compiz the console would only show up as 640x480 resolution. My resolution in X starts as 1280x800 without any problem. I realize that you can use vga=xxx as a kernel argument but this only works with NON-widescreen resolutions. I require that it be set to a widescreen resolution like it was before the fglrx & compiz installation.
View 9 Replies View RelatedI'm using the 270.41.19 nvidia properietary driver for my Geforce GTX460 graphics card. I have a Sony TV connected to my HDMI and I know it supports the 1920x1080 resolution. Yes it works after gnome or other DE loads up.
But during the GRUB screen and the bootup console - It defaulted to a 640x480 resolution (as it always does with the nvidia prop driver). I usually used to check the output of hwinfo --framebuffer and choose the resolution by appending the right vga=0xabc parameter.
But now I have a problem since hwinfo says the best widescreen 16:10 framebuffer resolution that my card supports is 1280x800. Here is the output from hwinfo --vbe which should give the info about both my gfx card and my TV.
The initial nouveau driver was able to output native 1920x1080 during the bootup on the console without issues, so I guess even the properietary driver should be able to output (If my understanding is right the nvidia module loads later during the bootup and only is required for the X but not for the console itself).
[Code]...
I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
View 5 Replies View RelatedIs it just me or the fonts in opensuse are way too small and thin and fuzzy? Expecially compared to those in ubuntu. So I changed my dpi font for my 1440*900 17 inches laptop in gnome settings from 96 to 102 dpi. same on firefox where in about config I had to change layout.css.dpi from -1 to 110. Now I can read decently even if some fonts are a little fuzzy and slim.
View 9 Replies View RelatedI have the all the latest updates from yast. I recently installed the nvidia drivers. I have a black fuzzy line near the top of the screen. At the task bar(bottom of the screen.), all the menus now appear at the top of screen.
View 3 Replies View RelatedThis morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory
patch /usr/src/linux directory
copy kernel config from /boot directory
make menguconfig and load config
the make all
make modules install
i have also tried make install as well
then i mopy system.map the kernel file and config file into /boot directory
edit lilo
reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message
Code:
Error:
kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel.
they are versioned as ""
instead of "2.6.33.4-smp".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
ERROR: I don't have make module
Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.
View 9 Replies View RelatedFrom the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies View RelatedUPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
View 9 Replies View RelatedI got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies View RelatedI tried to install the 3D-accelerated proprietary graphics driver for my graphics card but it doesn't work.
I went to System > Administration > Hardware drivers.
It downloads but when trying to install I get an error that says: "SystemError: installArchives() failed"
lspci shows:
Code:
xavi@xavi-laptop:~$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
xavi@xavi-laptop:~$
Just used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
View 14 Replies View RelatedI am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.
I am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies View RelatedI need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies View RelatedCutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
For those who need or want to install the latest ATI proprietary driver (Catalyst 11.2) right after a fresh 11.4 install - and might not look for solutions in the development subforum.In order to compile the module, I installed the kernel sources and the pattern devel_basis. I normally use most packages in this pattern, so I install it by default from other scripts. While running atiupgrade on a fresh install, I was surprised by the number of packages getting installed with that pattern.Please report if it doesn't work. (like aticonfig initial failed to add a fglrx section for some reason).Take a look at the atiupgrade thread in the development forum: Upgrading ATI driver with atiupgrade.
View 9 Replies View RelatedI have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies View Relatedfglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
I recently upgraded to Ubuntu 10.04, and Iv been using the ATI/AMD propitairy driver FGLRX and it worked fine inn 9.10.But now, the Bootsplash is ugly, and it takes ages for the OS to load, I didn't have this problem with 9.10.I try to remove it, but it chucks out an error stating a package doesn't exist.
View 1 Replies View Related