I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
================================================== ATI Technologies Linux Driver Installer/Packager ================================================== which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin) Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory patch /usr/src/linux directory copy kernel config from /boot directory make menguconfig and load config the make all make modules install i have also tried make install as well then i mopy system.map the kernel file and config file into /boot directory edit lilo reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message Code: Error: kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel. they are versioned as "" instead of "2.6.33.4-smp". you might need to adjust your symlinks: - /usr/include - /usr/src/linux ERROR: I don't have make module Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
I recently upgraded to Ubuntu 10.04, and Iv been using the ATI/AMD propitairy driver FGLRX and it worked fine inn 9.10.But now, the Bootsplash is ugly, and it takes ages for the OS to load, I didn't have this problem with 9.10.I try to remove it, but it chucks out an error stating a package doesn't exist.
From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
Just used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
I am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command: ./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output: Created directory fglrx-install.oFbosX Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801 Generating package: Debian/testing cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory Package build failed! Package build utility output: ..... dh_install: Compatibility levels before 5 are deprecated. cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1 make: *** [binary] Error 2 dpkg-buildpackage: error: debian/rules binary gave error exit status 2 Removing temporary directory: fglrx-install.oFbosX
OpenSuse 11.2 linux 2.6.31.12-0.2-desktop x86_64 ATI fglrx video driver v10.4 ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
My console display is hard to use and read ever since I installed the ATI fglrx driver (the problem appears with any version of the driver): ImageBam - Fast, Free Image Hosting and Photo Sharing
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
I had recently re-installed Ubuntu and had it point to my old /home dir. Anyways whenever I load up terminal just the cursor shows no christoph@christoph-desktop: whatever just a blank cursor.
I can type but nothing would happen it would be like typing into a text editor.
Then suddenly it severely bogs down my system and my screen get darker and then the terminal eventually kills itself and goes away.
seems that i have to reinstall my ati card driver after every update. i forgot reinstall it yesterday , now i can't get into unbuntu. the screen is black with white lines. how can i go into safe mode? i want to reinstall ati driver . cause i only install ubuntu in my computer, it has no boot menu, and i 've try ESC key, but it was useless.
I did a few things to the drivers and the wireless aspect of my ubuntu system and I'd like to know how would I reset everything back to as if it was a fresh install (but only regarding my wireless drivers and all that jazz)?
I'll have to purge it and then reinstall it over a wired network.
I've been searching forums like for 2 days, but couldn't find any similar problem. First of all im running Ubuntu 10.04 desktop version on my netbook Acer aspire one (AOD150) Every time i turn off my netbook and after turn it on, in "Hardware drivers" it says that driver for wifi is not in use, also button for switching on/off wifi is not working. So everytime i start up i have to go into "Hardware drivers", remove driver for wifi, and then activate it again. And everything is working gr8 after. Its just too annoying to do it everytime.
I'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
so i got myself in way over my head too soon with Ubuntu but i really like the OS.. I installed 10.10 on my HP laptop according to the directions on [URL]. Everything went well and I had no problems until I came across a thread about aircrack-ng.. I decided to test how vulnerable my own connection was after getting scared by looking up some how-to videos on ..... that made it look a little to easy. I was having a ton of problems with the injections tests and couldnt get it to work. I was trying to patch my ath5k driver according to some threads i found on this forum and couldn't get it to work. I finally found a thread somewhere about editing the base.c file to fix the driver. Well, being a noob i have no idea what i did but it wasn't good... yep, shake your head.. i deserve it haha.. anyway....
When i rebooted the comp after finishing the editing process it came up with all kinds of errors and brought me to a grub rescue prompt.. Yikes!! luckily i had Ubuntu 10.10 on a usb so i restarted, tried to delete the partition it was on with gparted and then tried to reinstall it.. The installation worked and now I can boot into windows again from the grub loader with no problems, but Ubuntu is all screwy.. Windows connects to the internet and doesn't seem to be phased in the slightest bit but ubuntu won't let me stay connected to any wireless networks and I also get a failed message when i try to activate the nvidia driver in Ubuntu.. Man, did i learn a lesson about getting ahead of myself and trying to bite off more than I can chew! I really love Ubuntu and the open source ideal so I don't want to let this sour me..
At the partition select prompt when I reinstalled ubuntu I selected "partition my drive manually" or something to that effect. Should I have installed it along side windows via the other option? I have a feeling my problem was compounded when i tried to erase the partition Ubuntu was on but now I'm totally lost and I really don't want to screw up my comp any more! I figured it's time to ask for help instead of shooting in the dark searching random threads for a similar experience which may not be similar at all.
Is there a way to repartition everything from windows without losing my data and reinstalling Ubuntu? I didn't have anything worth saving on Ubuntu but i have about 100gb worth of stuff on my windows partition i don't wanna lose! If I forgot to add any necessary information let me know and i'll be happy to provide any info I can.
