I am trying to install xorg-driver-fglrx using apt--get but it return error which says btw i am using ubuntu8.10 Desktop distribution
Code:
root@VAIO:/home/miriyala# apt-get install xorg-driver-fglrx
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies View RelatedI did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
I cannot get my X working with fglrx.
Additional info:
Code: Select all# cat /etc/X11/xorg.conf.d/20-fglrx.conf
Section "Device"
Identifier "Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]"
Driver "fglrx"
EndSection
[Code] ....
How unistall fglrx and vga driver and restore to debian with out vga driver.like new debian with new install.
View 2 Replies View RelatedA few days ago I ditched the user friendly world of Ubuntu and installed Debian Squeeze amd64 (testing) over it. I did not install the suggested Gnome 'X desktop' in favour of booting to the terminal and starting X once logged in as a user.
Everything was fine except for the fact Xvesa was used instead of Xorg as the system did not have the required Fglrx driver. I'm using an Acer ASPIRE 5536 with an ATI Radeon HD 3200 Graphics stuffed in it, which certainly beats intel GMA.
Unfortunately the drivers for it are proprietary.
On Ubuntu this was automatically detected and I was asked if I wanted to sell my soul and enable the restricted drivers. On debian however I have to download a shell-script of the ATI website to install the fglrx module.
Following this guide I downloaded the correct file (Under motherboard/something) and ran it as root.
I couldn't run it with any --buildpky Debian/XXX option, they all failed.
Code:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Debian/testing
cp: cannot stat `/root/fglrx-install.tCX8nC/x710_64a/*': No such file or directory
Package build failed!
[Code].....
I've just built a new system, the motherboard has an inbuilt ATI 4290 video (part of AMD GX890) and I'm using it with a Dell 2405 monitor. I've installed the latest Catalyst driver (10.6) from the AMD site, I can build the driver and X starts OK. The control panel for Catalyst says it will support 1920x1200 for a DVI connected screen - which mine is. When I start X it's always 1600x1200 and if I set the resolution via the Catalyst control panel, I get a display that has a black edge on the right of the monitor - about 1/4 of the screen.
At this point, I haven't tried setting any Modelines in xorg.conf as the fglrx driver is getting the information from the monitor via DDC and I'm assuming (probably a bad idea) that this data is correct.
Can anyone make any suggestions regarding this? Should I be setting Modelines regardless of what the driver gets from the monitor? Log files available if requested. Other that the 1600x1200 limitation, the system (AMD X6 1090t) runs very well.
I've been using Fedora 15 LXDE for a few weeks (its been great), and decided to install the ati proprietary drivers (I used the tutorial in one of the general strickies). As soon as I rebooted, I now get the following message:
Code:
Started SYSV: Late init script for live image... ATI external events daemon. into universal adresses I can type stuff using the cursor, but it doesn't do anything. I've tried adding 'runlevel 3' to the boot options in Grub to try and prevent fglrx conflicting with Xorg but it doesn't seem to work, unless I'm doing something wrong.
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
I have a 3rd party driver that is trying to install a touch screen driver, it is looking in /etc/X11 for xorg.conf and it isnt there. The Ubuntu docs pointed me at a diff folder which also didn't contain xorg.conf. c is it located? I will just sym link it during install them remove the link once its done. EDIT: Should probably mention that I'm running ubuntu 10.10 (Which was upgraded from 10.04). And I'm running Desktop Edition
[Code]...
Pretty much what the title says.. a few more details:
- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)
I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).
I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
View 5 Replies View RelatedI was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
View 9 Replies View RelatedI got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies View RelatedI tried to install the 3D-accelerated proprietary graphics driver for my graphics card but it doesn't work.
I went to System > Administration > Hardware drivers.
It downloads but when trying to install I get an error that says: "SystemError: installArchives() failed"
lspci shows:
Code:
xavi@xavi-laptop:~$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
xavi@xavi-laptop:~$
I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies View RelatedI need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies View RelatedI am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory
patch /usr/src/linux directory
copy kernel config from /boot directory
make menguconfig and load config
the make all
make modules install
i have also tried make install as well
then i mopy system.map the kernel file and config file into /boot directory
edit lilo
reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message
Code:
Error:
kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel.
they are versioned as ""
instead of "2.6.33.4-smp".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
ERROR: I don't have make module
Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
I recently upgraded to Ubuntu 10.04, and Iv been using the ATI/AMD propitairy driver FGLRX and it worked fine inn 9.10.But now, the Bootsplash is ugly, and it takes ages for the OS to load, I didn't have this problem with 9.10.I try to remove it, but it chucks out an error stating a package doesn't exist.
View 1 Replies View RelatedFrom the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies View RelatedI have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies View RelatedJust used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
View 14 Replies View RelatedI am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.