One moment I was on my system working and the next I realized someone had deleted or removed my sound driver because I checked and it wasn't there. I should have written it down but I didn't and now I feel real stupid. Is there a way to restore it. I have a 32 bit machine running Fedora 12 Gnome.
View 3 RepliesI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
I am having WinXP installed, and also installed Ubuntu 10.04, after so i wanted to remove Ubuntu 10.04, so i removed partitions from XP, disk management tool. The Ubuntu installtion partition also got removed. But also my two more drives also removed with the removal of Ubuntu partition.
After that i had restored XP bool loader by reparing the Installation of XP.
Now any one can tell me how to restore my other two drives, which i manually did not removed.
2 days ago I upgraded my f12 system to get the latest updates including the latest kernel (as of Xmas day).When I rebooted it appeared that my graphics drivers didn't work and I was restricted to an 800 by 600 res, but otherwise my system worked okI followed the tutorial in the signature of leigh who often posts on here for installing nvidia drivers, but now when I boot up I just get a black screenduring boot up I get that blue screen with the White fedora logo in the middle, but after that instead of going to the login page; I just get a black screen. There is a cursor where I can type but it's not a command prompt by the look of itis there some way I can boot into safe mode, or to reset the graphics driver so I can get back in? I have several live CDs if that will helpmy g card is an nvidia x27---------- Post added at 01:37 PM CST ---------- Previous post was at 09:23 AM CST ----------grub.conf
Code:
# grub.conf generated by anaconda
#
[code]....
I have an old Dell Dimension 4500 that, until recently, had 2 hard drives. One drive is running Xubuntu Koala and the other was running XP. I had set up Xubuntu to run LVM.
After needing XP again for a small project I tried reinstalling XP, got disk errors, took the drive out to just have Xubuntu, and now when I boot I get "Error loading operating system".
I have tried restoring GRUB from a Live CD with no help. Everyplace I look on the net talks about restoring GRUB after installing Windows on another drive. I'm trying to get GRUB working again after removing the XP drive.
Fedora 14 on my laptop has randomly decided that it hates me. The system stops booting after "starting atd", right when its starting X. It "hangs" after the fedora logo, though it will reboot when I try "ctrl-alt-delete". I can see that haldaemon is failing to start, and when I boot the kernel with "selinux=0" it gives me an error message:
error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory. NetworkManager fails with same message. the .so file is in its proper directory, where it has been all along. I've tried booting into runlevels 2 and 3. No luck there either. It'll boot to the login prompt, but as soon as I under my userid the screen flashes. I managed to get the error message it was giving me before the flash: inconsistency detected by ld.so: dl-open.c: 503: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT` failed!
I can boot into single user mode just fine. I've checked dmesg and Xorg logs, but I honestly don't know what I'm looking for (and I imagine that those logs would be useless if I boot into runlevel 1, since the error is at higher runlevels. But I can't get the logs for those because the computer just hangs. SSH and networking are never enabled before the hang.)
I'm at a loss here. I use the machine for both school and work [and I have quite a bit of both to do today] and I've been trying to get it to boot normally for hours now. Anyone have any ideas that I could try?
Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies View RelatedHow unistall fglrx and vga driver and restore to debian with out vga driver.like new debian with new install.
View 2 Replies View RelatedI have a Dell desk top PC, running WinXP and Ubuntu 10.04 LTS with a Ge-Force FX 5200 video card. In trying to get both monitors to work properly I thought it would help to reinstall Nvidia binary X.Org driver V173. After I removed the driver I tried to restart the computer with Umbuntu, it hangs up at the Ubuntu logo. I can boot with the live disk, I also tried to reinstall the Nvidia driver But the machine still will not boot from the hard drive, it will boot into Win XP normally.hould I just reinstall Ubuntu or fix the problem I created? My skills working in Terminal are minimal
View 7 Replies View RelatedI took out some USB speakers that had been working for many months because I needed them on another PC. I plugged the audio out (lime colored female connector on back of Ubuntu PC) into my stereo receiver's VCR audio in (Red and white jacks), no sound. Yes, the cable is fine (same cable I took off the other PC which was working fine), and the receiver is set to VCR. I recall having to go through some hoops to get the USB speakers working way back when. The Pulseaudio volume control shows left and right pulsating bars when I have on Pandora, but sound is obviously not being sent to the right output. I also tried the optical audio out on the PC into the receiver's DSB optical in but again no sound.
View 9 Replies View RelatedI accidentally removed the sound menu from my panel bar in Ubuntu 10.10. I did manage to find some solutions to get the sound volume applet in place, like it was in previous Ubuntu versions, but I do obviously prefer the new sound menu in place. Does anybody know how I can get it working again?
View 9 Replies View RelatedRhythmbox plays some music (not all of it) and it sounds crappy. And when I start Amarok I get this: KDE detected that one or more internal sound devices were removed. Do you want KDE to permanently forget about these devices? This is the list of devices KDE thinks can be removed: Output: HDA Intel (INTEL HDMI) Output: HDA Intel, INTEL HDMI (HDMI Audio Output)What to do?
View 4 Replies View RelatedI have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies View RelatedSound was working until I tried to install a rawhide version of Nouveau which hosed my system.Backed out to where I started and the sound is gone.The hardware is not showing up in the System> Preferences> Sound.I reinstalled alsa and pulse audio.
Code:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
[code]....
i just installed fedora 14 x86_64 on an external driver now everything works fine except that i don't have any sound comming out of my speakers so i think that my sound cart is not detected or the driver isn't installled (can't find a driver for linux to so i can't confirm)
View 6 Replies View Relatedi am using dell studio 1450..my distro is fedora 13.1 community remix..i have some problem
1- sound is not working,,,
2-wifi not working
3-lan card not working
lspci - sound 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Ethernet and wifi 02:00.0 Ethernet controller: Broadcom Corporation Net Link BCM5784M Gigabit Ethernet PCIe (rev 10)06:00.0 Network controller: Intel Corporation WiFi Link 5100...i have tried rpm fusion update configuration also but it does nt work for me
I recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies View RelatedI have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies View RelatedI've been having trouble with CUPS.I uninstalled it and I wanted to re-install it. When I removed CUPS some other files were removed too. I don't have an option of installing the software or updating a system, in the Control Center.
View 1 Replies View RelatedRunning Lenny in my plain vanilla x86 box since Lenny went final. No video card. System is completely up to date with the 26-2 kernel. All apps are Deb stable from repos.
chkrootkit, rkhunter, and clamav have all been run within the last 24 hours (clean). Firestarter is the firewall.
I left the box with about 10 apps running over all 4 virtual desktops (KDE). Came back in a couple of hours to find all apps closed except Gkrellm. Boinc, which had been dormant for lack of work, had gotten some jobs and was running in background. All apps reopened normally except Iceweasel did show the "closed unexpectedly" notification. I don't use a screensaver.
System did not shutdown and auto reboot. Uptime clock and syslog had chugged along right through it. Syslog seemed normal except for the exerpts below that looked curious to me.
I have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies View RelatedA friend of mine is running Ubuntu 10.04 LTS.
Applets (indicator applet, main menu, etc.) on his top GNOME panel frequently fail to appear when he logs in, and have to be added manually.
What we've tried:
1) Right-click each applet and check "Lock to Panel".
2) In gconf-editor, set "/apps/panel/global/locked_down" to true.
Neither makes the applets stay put.
I'm running Ubuntu 10.04 LTS as well, and have no such problem.
I've used an older version of ubuntu before, when it was brown and orange. I ran it off of a 8 gb solid state express card. Used it for about a month, didn't like it because I didn't know how to install anything and because it was slow (because ran off of a express card). Now, I'm looking to try ubuntu 10.10 on a partition of a main hard drive, specifically on the chrome os laptop when it comes out.
Now, I've read up that the battery life for ubuntu is mysteriously worse than on what would run a mac or a windows. This battery life issue is driving me away from ubuntu. How much battery life would I actually get for ubuntu if my battery life lasts 4 hours running a windows 7? And how much hard drive space do I need to partition to install ubuntu?
With Firefox 3.6 from the official repository, and the flash-player-plugin from Slacky.eu installed here. It's worked fine up until now, where websites either claim it's not installed, or show a blank box instead.NoScript is installed on my Firefox, but given that on fully trusted pages (of which there are very few) it still happens, and nothing else blocks Flash besides AdBlock and Firefox's own settings (both checked too) I suspect the plugin.I also tried downloading direct from Adobe, and plonking the libflashplayer.so in /usr/lib / mozilla/plugins and making a backup of the original one (The one provided from Slacky's package) but to no avail.So it seems to be the plugin, but for inexplicable reasons.Would anyone happen to be able to explicate this inexplicability?
View 12 Replies View Relatedi was moving some images over to my external hard drive last night and the install went to read only and i couldn't do anything so i rebooted and now i cant load into the desktop i just get init frames command line
View 3 Replies View RelatedI'm not sure if I can even explain this properly! I'm attaching a hopefully self-explanatory screenshot of
(1) system monitor saying that 23.3 out of 24.6 GB of my root is used (!!!)
(2) diskanalyzer showing root should be 5.9+4+3.3+some small stuff = about 15 GB.
At startup I get a warning saying something along the lines of "you only have 50MB available on root file system.. you should delete unnecessary files.. " and that opens Disk Usage Analyzer.
Possible suspect - I had been trying out VirtualBox. On root. My virtual machine did have an 8gig hard drive, expandable I believe. But it never got past 1.7, and I've removed it, uninstalled VB and removed it from trash. (Is this weird: my trash is at /home/me/.local/share/Trash/files - took me a hell of a while to find it!)
With 100MB available on root I can barely do anything! My whole compiz/config setup even disappeared after a reboot!
I have a very weird case in my firewall.I have an asterisk server and some phones and between them there is a linux firewall based on iptables.With basic rules on iptables everything works ok, but when I put a single nat rule (no matter what rule I use) some packets from some phones misteriously disappear from interfase to interfase.
Clearer:The firewall has two interfases: eth0 (pointing to phones) and eth2 (pointing to asterisk).One problematic phone is 192.168.3.242, so I use tcpdump this way.