Ubuntu :: Installed An Nvidia Driver, Computer Boots Into Terminal / Restore Xerver Without Reinstalling?
May 14, 2010
I just installed the only Nvidia driver available in the software center for Ubuntu. I'm running Ubuntu 9.10. I don't know which Nvidia driver I installed, but the screen resolution the Nvidia driver tried to set fails at login, so now I'm stuck booting my computer into the terminal. . I used sudo apt-get install xerver-xorg in attempt to restore the screen; however, the xerver-xorg package cannot be found. How do I restore xerver without reinstalling Ubuntu? How do I restore my original driver?
View 9 Replies
ADVERTISEMENT
May 15, 2010
I'm not sure what Nvidia driver I installed the other day, but it's messed things up. After Ubuntu boots up and asks for login, I am greeted with terminal. Setting 1152Xwhatever resolution failed. Setting to 1024X768. My xorg.conf.old file is completely empty, so I have no idea what the original settings were. I have tried removing and reinstalling xserver.xorg but that hasn't seemed to get me anywhere. I have also used the "apt-cache search nvidia" command to see what drivers could be installed, but every single driver that I attempt to remove isn't installed.
View 5 Replies
View Related
Jan 12, 2011
After installing ubuntu 64 bit, I installed all my updates and installed the current nvidia driver for my 9800 GTX+ from the additional drivers page. After restarting my computer, ubuntu boots into text mode. I used google and found out a couple of commands like:
After i hit control+alt+f7 it hangs on checking battery state with NO ok to the right of it. after running sudo apt-get --purge remove nvidia -current and restarting the computer, the boot hangs on the ubuntu screen everytime.
My specs are:
Core i7 860
4 GB of ram
Nvidia 9800 GTX+
View 9 Replies
View Related
Jan 4, 2011
Finished installing Ubuntu 10.10 in my XPS15, intel i5 4g ram, nvidia GT 420M graphics card,
problem is when i go to additional drivers, the driver listed (Nvidia accelerated graphics) when I install it and reboot it the computer starts on the terminal, no graphic interface. All I get is the black screen asking me login and password, when I enter them, just get the terminal prompt in a black screen.
View 3 Replies
View Related
Feb 9, 2010
I've installed the nvidia driver from nvidia website. I don't want to mess up my system So my question is how can I uninstall this nvidia driver? (I want to install the one from youm repo)
And my second question - when I'll be installing my nvidia drivers from repo, this is the best way to go: [URL]
View 7 Replies
View Related
Jun 4, 2011
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
View 1 Replies
View Related
May 2, 2011
I recently upgraded to 11.04, and after messing around with Unity for awhile decided I'd try out Gnome 3.After rebooting to finish the installation, I noticed that the interface had reverted to what my desktop looked like in 10.10, except the color scheme was different. I also got an error message saying my computer's graphics couldn't handle Gnome 3 (I'm on a netbook). Then I went online to look up instructions on how to switch back to Unity (since the option wasn't available on the login screen). After following the first step, which involved entering a command into the terminal, I left the house for awhile.
When I got back, the screen was black with white text (terminal-esque) asking for my username. After typing it in and pressing enter, it asked for my password, and after entering that it became a "terminal". This screen comes up every time I start my computer now, and I have no idea what to do. I could reinstall Ubuntu from a flash drive, but I want to be able to access my files. Is there any way to get around this, or recover my files without taking out the hard drive? As you can probably tell from my post, I'm very new to Ubuntu and Linux, and the mess I'm now in is the result of acting on uneducated impulse.
View 9 Replies
View Related
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
May 19, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
View 9 Replies
View Related
Mar 4, 2010
My new laptop (ASUS N71Jv) refuses to install Ubuntu 9.10 - it just produces a black screen. I finally managed to get it on there somehow by installing it in safe graphics mode, so now I have to stare at 1024x768. NVIDIA has a new driver (195.36.0 available that may support my graphics card. When I try to install the executable nVidia driver from a terminal, it rightfully complains that X server is still active. Ctrl-alt-f1 or sudo /etc/init.d/gdm stop produce a black screen and a frozen cursor, /sbin/init 3 does nothing.
So what I want to do is simply install the nvidia driver while not being in gnome.
I suspect that my xorg.conf file does not allow anything but 1024x768 (safe graphics mode). It's very frustrating. Any ideas how I can install the driver while being in simple failsafe command line mode or something?
View 3 Replies
View Related
Jan 21, 2010
I installed the newest restricted driver for my gts8800 nvidia card in an attempt to get starcraft b.net to work. Come to find out this has been a long standing bug with the menus not redrawing properly. My question is, now that I've installed the restricted driver 188, how do I go back to an open source one?
View 1 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
Sep 12, 2010
I just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies
View Related
Feb 23, 2011
I mucked my system up while trying to install proprietary nvidia drivers -- I was careless and installed the wrong ones (should have used legacy drivers). Now my system hangs on "starting udev" during boot.I have tried many combinations of boot options in an effort to blacklist the problematic driver. Attached is a picture of my boot screen after specifying the options "single init 3 modprobedebug", and removing the options "rgbh quiet". For some reason I am having a lot of trouble blacklisting the correct module, or maybe I caused a kernel problem, which in that case is beyond me.Also, boot option syntax question: can I specify something like "rdblacklist=*nvidia*" using wildcards?
View 5 Replies
View Related
Mar 27, 2010
I have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed
1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx
[Code]...
View 11 Replies
View Related
Jun 2, 2010
I just installed My first Linux / Ubunto. PC as a Nvidia 8600, installed Nvidia driver. Very poor quality display. Using ViewsonicVP231wb.
View 9 Replies
View Related
Mar 15, 2010
I finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).
Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.
No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.
It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.
My xorg.conf is below.
xorg.conf:
Code:
View 3 Replies
View Related
Aug 29, 2010
Can't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Aug 8, 2009
I have accidentally removed my /boot partition(when installing grub using LiveCD i'm typing "rm -rf /boot" instead of "rm -rf boot") After that i have installed grub, have to reinstalled latest kernel(2.6.29.6-217.2.3.fc11.i686) using rpm(and 2nd time using yum) but result the same: i can't boot into my system. Unfortunately, i can't copy&paste log, but booting stopped after something like a:
mounting /proc
mounting /sysfs
Creating /dev
then kernel finds keyboard and mouse and... and nothing. Is it possible to restore my system without reinstalling distro?
View 4 Replies
View Related
Nov 14, 2010
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
View 5 Replies
View Related
Sep 5, 2010
Since the partition of windows7 (C: ) where wubi was installed was too small, I decided to reinstall wubi into another larger partition (E: ), keeping the old root.disk. Sadly when I replaced the root.disk ubuntu cannot boot, the loader says that there is no root.disk file, although it's there... I guess there is some kind of checksum about the virtual disk toward the loader is poiting... So how can I have my old ubuntu installation back?? I still have the old root.disk.
View 9 Replies
View Related
May 7, 2011
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
View 2 Replies
View Related
Oct 15, 2010
I have been bashing my head against the keyboard for over 6 hours now i just got a brand new asus ul30v it uses Nvidia geforce G 210M.
I went straight to installing ubuntu 10.10 on the whole disc. when the installation was complete i was happy and logged in. only seconds after i logged in i was promted that i was recomended to install a driver for my graphic card, for 3d and such. so i followed the installation and was asked to reboot. so i did. but then ubuntu booted straight into fullscreen terminal.
While being in this terminal i have tried to purge and reinstall GDM amongst endless other things, including rebooting several times.
Not being able to do anything about it, i reinstalled, and repeated the installation of the driver. same story over again.
Bottom line is i have rebooted close to 30 times, and reinstalled over 5 times. ive tried installing from the terminal (excactly the same story). tried to download it from their homepage, then install it (couldn't install it because i had to turn off driver X and "terminate all OpenGL applications", wich i dont know how to do. tried googling it, but ended up worse than before..[url]
Im guessing i cant install the driver at all with ubuntu 10.10? i havent tried it with older ubuntu versions because, of course, i wanted the newest version.
I have barely been using ubuntu before, although i've had it dualbooted.
I have found alot of posts with people getting stuck in terminal on boot, but none of the solutions that worked for them worked for me, probably because they had different problems than me.
View 3 Replies
View Related
Apr 23, 2010
I wasn't thinking at the time, but after I installed Ubuntu 9.10, I installed Xp. Did it the wrong way around, is there anyway to get grub going again, without reinstalling Ubuntu?
View 2 Replies
View Related
Mar 13, 2011
I am having trouble with my computer. I accidentally deleted my python and turned off my computer. Right now I am using an old version of ubuntu (ubuntu 8.4) and would like to know how I can restore the python for my ubuntu 10.10 so that I will not lose the things that I have installed on it if this is possible.
View 2 Replies
View Related
Feb 21, 2011
I have triple boot machine Windows 7 + Ubuntu + Mac OS X in a single HDD.
Windows 7 -- /dev/sda1
Ubuntu 10.10 -- /dev/sda2 (In same Partition grub 2.0)
Mac Snow Leopard -- /dev/sda3
I have installed GRUB 2.0 in same partition where current ubuntu is installed ie /dev/sda2 and basically Windwos Boot manager is installed within MBR.. & I have added GRUB 2.0 and Mac OSX entry into windows boot manger with some freeware from windows 7. So practically when I start my computer First Windows Boot manager comes up and asks me which OS to start first. I set up this type of installation with the thought that when grub 2.0 is not installed within MBR, I can format the whole /dev/sda2 partition without any difficulty and reinstalled any future release distro of ubuntu. So is it practically possible? If I format /dev/sda2 and reinstall new ubuntu release there.. Old grub won't affect the installation of new one.
View 1 Replies
View Related
Feb 25, 2010
I want to transfer the software and packages that's already installed. I have an ISO disc creator to take the current information on my hard disk and format it for an ISO, which I can burn onto a DVD, but what I'm wondering is, how would I go about reinstalling the OS
here's the backstory, I'm wanting to transfer the hard drive from this computer to the one I'm going to custom build once it's finished, and I'm pretty sure I would have to reinstall due to the fact that I would have to reconfigure and install new hardware drivers. If I'm wrong, please tell me so I don't waste the time and go through the trouble of this
my plan is to create an ISO of my hard disk, then backup all of my personal files, then remove them so the ISO will have more room (and I may get rid of some unnecessary packages), then get rid of everything on the hard drive (just use a livedisc of something and use a partition manager to delete all partitions on the hard drive) then move the hard drive over to the new computer, and reinstall with the ISO disc I created
the things that will be staying the same is the graphics card, some peripherals (like monitors, keyboard, wacom tablet, printer, etc...) but the motherboard has a different sound card and a different processor (I'll probably just install a different kernel to accommodate for that) and some different things that are smaller (don't forget the power supply)
offer a better method of transferring the hard drive (and don't say "just simply take the hard drive out and put it in the other computer" unless you have indisputable proof that it will work. I know it most likely won't work for multiple reasons, the drivers being one of them, the fact that windows can't do that (I have a different plan for windows that involves upgrading from vista 32bit to windows 7 64 bit))
View 9 Replies
View Related
Aug 18, 2010
I've really borked up my Gimp. I'm running 10.04 64-bit and had at some point installed gimp but don't recall how or where I got it from. The strange part is that neither Synaptic or Ubuntu Software Center showed it as being installed.
Anyway, it started misbehaving (locking up) so I figured I'd uninstall and reinstall. That's when I discovered that the system didn't show it as being installed at all. Needless to say, I couldn't uninstall it so I decided to just reinstall over the top through Ubuntu Software Center. The installation seemed to complete normally but when I tried running it I got an error stating that there was a version mismatch for libgimp and suggesting that maybe I had gimp installed in both /usr and /usr/local. Not knowing what else to do, I uninstalled via Ubuntu Software Center and then removed all gimp related files from both /usr and /usr/local. Lastly, I reinstalled again via the Software Center.
Now when I try to launch gimp I get a box in the panel's Window List titled "Starting Gimp Image Editor" but shortly thereafter it disappears and I'm back to the desktop. I've even tried it all over again but utilizing Synaptic for the final install (as well as apt-get) with the same result - it tries to load and then... nothing. I must have deleted something essential when rooting around in /usr and /usr/local that is not replaced by reinstalling gimp but I have no idea what or where. So now what do I do? I really need gimp installed on this machine. I do have a full system backup but it's a couple of weeks old and I don't want to lose all of the changes that I've made to the system since then.
View 4 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
