I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.
View 10 RepliesI got a LG notebook R580, and there is no sound at Debian with Kernel 2.6.26-2-amd64, driver snd-hda-intel[URL]
View 5 Replies View RelatedI have an nvidia card and a motherboard with an internal sound card.
The nvidia card hogs alsa, and it's really obnoxious because I don't use hdmi for audio (or video, for that matter, crt all day)
I would normally just blacklist the module that the card is using, but I hit a hiccup...
This is the readout for the gfx card from lspci -v
Code: Select all01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 84bb
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
And this is the readout from the motherboards internal audio card
Code: Select all00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a132
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Since they have the same kernel module, all the internet advice is pretty much moot, because I can't figure out how to effectively shut off one without killing the other as well. Huge PITA.
I just got Ubuntu 10.04 installed and I seem to be having a problem as many others with the sound. because a laptop with no sound tends to be a wee bit boring
Code:
I just got installed ubuntu 10.04 in my HP laptop. But there is no sound in my speaker??
View 1 Replies View RelatedI am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...
Since upgrading to OpenSuSE 11.3 I no longer have sound.I remember having the same prob upgrading to 11.2, but for the moment, I'm at a loss.
View 8 Replies View RelatedI've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies View RelatedI recently received my new multimedia laptop - an HP Dv7. I proceeded to install Ubuntu 9.10 on it and I've had no end of troubles with the sound card including, muffled sound - seemingly only coming from the LFE channel, only stereo controls in pavucontrol, failure to send sound out the HDMI port, headphones not working and not cutting of the speakers when the headphones are plugged in.
I believe that all of this will be solved if I get the appropriate driver for my card. I have searched around and sound in particular has tons of posts from many people all with slightly different problems, solutions and hardware. None of the solutions seem to be working. Also I just tried booting from the live CD and the sound is the same - no 5.1 and just muffled sound. I think my sound card is just too new and there doesn't exist a proper driver for it yet.
Here's what I get with lscpi:
Code:
% lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
01:00.1 Audio device: nVidia Corporation Device 0be2 (rev a1)
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
I'm using a custom kernel but the Intel Broadwell GPU hangs and gives the following error messages:
Code: Select allJan 2 19:24:06 debian kernel: [ 34.734460] [drm] stuck on render ring
Jan 2 19:24:06 debian kernel: [ 34.735563] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [1925], reason: Ring hung, action: reset
Jan 2 19:24:06 debian kernel: [ 34.735566] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[Code]....
I have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
I have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
lspci:
00:1 e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
aplay-l
[Code]...
Well i will write this down one more time i hope you don't delete it again To enable surround sound with ALC888 on Intel DG31PR for all versions of ubuntu inluding Lucid.(this works on other distros with alsa as well) gksu gedit /etc/modprobe.d/alsa-base.conf Find this line (if there is no such line (or the file is empty) it doesn't matter just add the next line and save it)(note that on older Ubuntu versions the file is named "alsa-base" as far as i remember): # Prevent abnormal drivers from grabbing index 0
Add this line after the #Prevent abnormal drivers from grabbing index0: options snd_hda_intel model=3stack-6ch-dig Then use this command to edit pukeaudio: gksu gedit /etc/pulse/daemon.conf
Find this line:
; default-sample-channels = 2
Change it to (make sure to remove the ; in front of it):
default-sample-channels = 6
[Code]...
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
View 2 Replies View RelatedBasically what the title says.I have an ASUS P7P55 WS SUPERCOMPUTER motherboard with the latest BIOS.
View 2 Replies View RelatedI just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 Replies View RelatedI have installed a Ubuntu Server 10.10 with fluxbox as X. Everything works fine except the sound. Either speakers or with headsets, it does not work at ALL. This is some informations that could help you. I need to listen music
[Code]...
Not exactly sure but tried several fixes and I'm now getting sound.
Not overly loud but decent enough. Funnily enough it sounds louder inside a windows virtual machine!
I've managed to get everything working including built in webcam on my laptop.The only thing I can't get is sound.
I have a Vaio VPC-EB1E0E which has "Intel HD Audio" . sound worked in Windows when I first booted up and used a Realtek Audio driver.
I'm using Kubuntu 10 RC1 - 64 bit (unable to get any earlier version of U/Kubuntu to work - unable to get Fedora to work either).
The closest info I've seen to helping is:
[URL]
I installed it but wasn't sure how to configure and it still didn't work... (no idea what codec etc)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Sony Corporation Device 9071
Flags: bus master, fast devsel, latency 0, IRQ 22
[Code].....
I see this at boot:
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
[code]....
I am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.
I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb
[code]....
in all these cases hsfconfig failed with the above error,
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedI can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
Well, the gdm issue was pretty easy to solve. Just reinstalled NVIDIA video drivers in runlevel 3.
But sound seems to be a litle more dificult. Before I spend some hours, I would like to ask if some had the same problem.
By the way, here is my alsa-info.sh url.
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
I have the following situation:
- Intel HD 4600 and 2 Full-HD monitors (Dell IPS, same model)
- left DisplayPort, right DVI
- Debian stretch with Linux 4.4.0-1-amd64
- XServer X11R7.7 and Cinnamon 2.8.7
… and the following problem:
When I restart the system or login after Standby, usually (not always, but often) some strange green and red pixels appear on the monitor which is connected via DVI. I can remove them by changing the display settings and restoring the extended mode again. However, most of the time the XServer crashes by trying to enable or restore the dual monitor mode (although I’m still able to start a new instance of X from another tty). The XServer also crashes every time I try to enable the extended mode from another situation.
I’ve already tried the following:
- connecting both monitors via DP (no pixes, but also crashes)
- swapping the monitors and using different cables, assuming a hardware problem first (no change)
- VGA instead DVI (works, but inelegant).
- blacklisting i915 or using the xforcevesa boot option (neither of them works, i915 starts though)
- using the nomodeset boot option (detects only one monitor and produces a fallback in software rendering mode)
A recent update made my intel 830 unusable with kernel modesetting enabled, so I disabled it. However, I get "No kernel modesetting driver detected" errors when I start X with the intel driver. Is there a way to make the intel driver not require KMS?
View 2 Replies View RelatedI made a recent update to my Squeeze system and got this weird problem. mplayer, VLC and firefox (.....) all have sound. But when I try to run Amarok I get nothing. I looked into the Multimedia panel on the KDE4 system settings, and its not showing any devices at all. Previously it used to show HDA Intel etc., etc. Now the entries are completely blank. How do I get KDE to recognize my hardware? Shouldnt it pick things up automatically?
View 3 Replies View Related