It is saying to make sure there is enough room in the tmp folder, so I cleaned out the entire tmp folder but the same error is still happening. Is there a way to make the tmp folder bigger? Or perhaps extract the temporary files to a different folder? Or maybe the size if the tmp folder is not even the problem?
View 1 RepliesI am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.
I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb
[code]....
in all these cases hsfconfig failed with the above error,
I am using k3b on Fedora 13. I am trying to create a DVD iso image from mpeg2 files. When I try to do this I get the following error.
Devices
-----------------------
LITE-ON DVDRW SOHW-1653S CS0R (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
[Code]....
Inside, www/html folder as an ordinary user i am not able to create files.using vi editor, as root in terminal, I can work there.I am using scite text editor. How to give access to that folder for the general user?
View 4 Replies View Relatedi am downloaded some e-books in the format .rar. when i am extracting them i am getting error as There is no command installed for RAR archive files. Do you want to search for a command to open this file?
View 3 Replies View RelatedIs there a cc cleaner equivalent for linux to clear out tmp, internet files, etc.?
View 9 Replies View RelatedI have recently been tasked to extract the subtitles from a lot of mkv files. Hundreds of them, maybe even more than a thousand. To do this, I modified a script I found online:
#!/bin/bash
IFS="|"
if test -z $1; then
[Code].....
So in the above example the subtitle is actually in track number one and my script would be borked for that particular file. Is there a way to integrate mkvinfo into the script and parse it to see what track should be extracted? Like, read it line-by-line and change the value of some #TRACKNO variable everytime a string like "| + Track number:" appears, and stop when a string like "| + Track type: subtitles" appears? Maybe even skip doing anything if there aren't any subtitles.
PS: I actually prefer SRT subtitles to ***. If there was some command line tool I could use to convert the resulting *** file to SRT I would be much obliged.
I am on Squeeze. In the past I have successfully extracted audio from video files. Recently when I try it I get an unplayable file, just some brief noise nothing more. Mplayer on the other hand plays every video and audio file out there. Is there something wrong with mplayer? I installed mplayer from the repo. I haven't compile mplayer since before Lenny.
View 14 Replies View RelatedI downloaded an ISO of some nes roms and used the archive manager to extract the files. It extracted them but it added a ;1 to the end of the extension. I don't want to go through 3500+ rom files and delete the added ;1 to the nes extension. How can I prevent this in the future?
View 3 Replies View RelatedI have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
Where is the Temporary Internet files?
View 2 Replies View Relatedme with proper syntax / command to remove temporary files in linux
View 9 Replies View RelatedWhere are the temporary files (.iso etc..) unetbootin downloads stored? Or are they stored at all?
View 1 Replies View RelatedI am trying to create a LiveUSB with persistent overlay. Here is what I am doing ...
1. I create my own LiveCD image.
# LANG=C livecd-creator --config=centos-livecd-desktop.ks --fslabel=CentOS-5.4-<arch>-LiveCD
2. Insert and format the USB (I'd tested FAT and EXT).
3. Create the filesystem on the USB.
# livecd-iso-to-disk --overlay-size-mb 2500 CentOS-5.4-i686-LiveCD.iso /dev/sda1
4. Test it.
# umount /dev/sda1
# sudo kvm -hda /dev/sda1 -m 256 -vga std
The process seems to be fine but when I boot I receive the message: "Unable to find persistent overlay using temporary" complaining about failing mount /overlay.
If I watch inside LiveOS/ I can find the overlay file: overlay-jimezam_lab-d9d04988-3b00-4a2d-8207-43007ac71ef1.
I'm new here and still searching how this forum works, but can anybody tell me where i can find the temporary internet files? In windows it was easy, but ubuntu 11.04 is totaly diferent. I use it now for 5 days and i'm happy i changed to ubuntu.
View 2 Replies View RelatedI have created a user account on a ubuntu workstation. I log into the terminal as this new user and when i try to create a file i get that permission is denied. I would like to create a file such that this new user and other members of a group can access it.
View 4 Replies View RelatedHowever, the ffmpeg command generates a temporary file blahblah.mpg.tmp of about 1GB per hour of transcoded video.My issue is that I can't seem to delete these files automatically from any bash script.Now from the command line, I can cd to the directory and just rm -f *.tmp and they get deleted. However, from my script, that same command doesn't remove those files. I thought maybe the file was in use, so I put a sleep command in for like an hour before the delete happens, but it still fails. I also put rm -f /mnt/mythtv/*.tmp in a root cronjob and it still doesn't delete the files.
If I just rm *.tmp I do get a prompt about "Are you sure you want to delete this write protected file?". But the -f switch seems to work fine as a normal user from the command line and just delete them.Does anyone have an idea how to troubleshoot this problem? The particular filesystem that the tmp files get generated on is on it's own xfs partition mounted as /mnt/mythtv.
Where exactly are the temporary files stored, in /tmp or /var/tmp. How can i remove temporary files through command line? What is the difference between these two directories?
View 2 Replies View RelatedI am using OpenSuse 11.2 (64 bits) with KDE 4.3.1. My hard disk partition contains 3 areas : / + /home + swap. Frequently the / area is filling with, I suppose, temporary files until it is full (15 Go) and that in a very short time, typically about 5 mn. Then, these files are cleaned by the system, when disk space is needed I suppose. The point is that during this time, the system goes slower and slower until the "cleaning". That seems to occur only when Firefox (3.5.6) is running so I suppose that these files are temporary internet files.
View 9 Replies View RelatedWhere are temporary internet files stored so as that I can delete them. A second point is that I have had Ubuntu for a few months now and my computer is starting to slow down.
View 2 Replies View RelatedFlash Player ActiveX is always copying movie from I-net before playing it. Is it possible to load and play flash movies directly from any source without usage of temporary files to protect the movie from any other LOCAL outside access?
View 2 Replies View RelatedFedora 12 64bit
Is there an easy and reliable way to install *.tar.gz package after extraction? Instead of going through ./configure etc.
My printer has stopped working.
1. I am unsure if any system changes have occured. I am sure I must have changed something, but apparently did not document it.
2. Printer does work from other computers
3 Computer was originally wireless connected, but switched to USB. This had no affect. Well I can scan now so great.
4, Printer is HP 6500a.
5. Printer has worked from this computer before
6 This is from cups error log:
D [05/Jan/2015:11:47:48 -0500] [Job 147] Set job-printer-state-message to "Can't copy stdin to temporary file", current level=ERROR
D [05/Jan/2015:11:47:48 -0500] [Job 147] prnt/hpcups/HPCupsFilter.cpp 536: cupsRasterOpen failed, fd = 0
I'm trying to use ${VAR:0:4} substring extraction described here: tldp.org/LDP/abs/html/string-manipulation.html and it works perfectly if i issue a command in bash. But when i put it in a script file and run it, bash gives me "bad substitution" error. Does anyone know how to fix it?
View 5 Replies View RelatedI have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
i was copying a large file through scp (in root account), suddenly had to turn off remote machine. i suspect the unfinshid file is somewhere in my system , i need to find and delete it
Code:
Filesystem Size Used Avail Use% Mounted on
rootfs 13G 12G 966M 93% /
[code]...
I have a pdf file (nasm documentation) that used to be displayed perfectly with xpdf, but now all code example lines remain blank. On the terminal I get repeated lines such as:
Quote:
Error: Couldn't create a font for 'Courier Bold'
Error: Couldn't create a font for 'Courier'
I tried to figure out the problem... the same problem occurs with both evince and okular. However it does not occur when opening the same file under root (tested with xpdf), so it seems to be some permission problem. I tried searching on the error message but couldn't find a working solution.
Attempting to use PLACES>Home (or Documents,Bin,Desktop,etc.)brings up the error message "There is no Windows program configured to open this type of file." If I open Open Office I can find all files in home, documents, etc. and open them.The computer is otherwise functioning normally but using the usual methods all the files that should show look empty. How did this happen? I was attempting to use WINE to load Avery Wizard (a Win utility) through AWsetup.exe. To do this I changed permissions for that file but I have subsequently removed the file and its subfiles using the terminal.
View 3 Replies View RelatedI have a collection of .MOV files which I want to turn into a DVD. A real DVD, the kind that will play in a stand-alone DVD player. I am not too concerned about fancy menus or anything like that. I just want something my parents can stick in their DVD-VHS combo and hit the "Play" button. I don't know where to begin looking. Has anyone done this? Is there any kind of a How-To or something? What Linux tools exist for doing this?
View 4 Replies View Relatedinstalling subversion on CentOS 5.5 using following command: [root@lucifer ~]# yum install mod_dav_svn subversion does dont connect to a mirror with following error, "Temporary failure in name resolution"
View 1 Replies View Related