I just bought an lenovo thinkpad 440 few days ago. I did all that was shared at [URL] ....
I get the following on the CLI :-
Code: Select all[ 1527.961367] [drm:intel_set_fpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[ 1527.963448] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
I am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.
I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb
[code]....
in all these cases hsfconfig failed with the above error,
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
lspci says
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[code]....
I do have the hibernate package installed...
I just backup my mysql db using mysqldump. I run it around 6pm of the evening but I just notice that on the last part of the dump file, it says "Dump completed on 2010-01-14 11:30:01". The time is "Jan 14 19:30" when I run mysqldump. Though the content is corrent, I still want to know why the dump reported it was completed but wrong time. I don't have my.cnf on my /etc so it means all was default by mysql. If I'm not mistaken, timezone by default in mysql is gmt.
My /etc/sysconfig/clock is
ZONE="Asia/Manila"
UTC=true
ARC=false
When I do "select now();" on mysql shell, it was the same with my system. I want to prove my backup was right but this thing confuse me a bit.
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
Ok first off, I love debian, but on my new notebook I am getting a little frustrated with the terrible, video performance.Direct rendering is enabled on both systems, and openGL is working (I can if I wanted to use compiz etc...) fine on both systems, just running slow on debian.
I have tried Lenny, Squeeze and Sid, I have compiled the intel driver (and Mesa3D) from git and got it working (I am sure its working because its given me a slight boost), I ahve also tried building the latest stable (and RC2) kernel.If I install ubuntu 9.10 I get pretty decent 3D performance, its not ground breaking, but hey its an intel chipset so I am not expecting to kick the latest nvidia / ati card's backside.I really dont want to use ubuntu, I find it unstable when compaired to debian, but I also want to be able to play the odd game when I am bored, and at the moment I just cant do that under debian
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
Go to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/" and delete the e1000e.ko-file
Then download [URL]
Take the newly downloaded e1000e.ko-file and move it to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/"
And finally load the module with either: "# modprobe e1000e" or "# insmod e1000e".
You should now have a working ethernet connection.
If connection is lost on system restart try rmmod e1000e; modprobe e1000e
I've for the first time installed linux (debian) to my computer. And I have a problem with ethernet that I can't solve.
I have a Asus Sabertooth P67 motherboard with built in ethernet card, I cant find any drivers for linux, I've tried google, Asus support page etc, but can't anything that says it will work with my computer, just a alot of windows drivers.
where I can find the drivers? Or if there's another way to solve the problem. When installing Debian i could choose between different drivers but no one worked, I've also tried with my motherboard CD but there was just windows drivers...
CPU:
Intel i7 3.4 GHz.
I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
View 11 Replies View RelatedBecause the version of the microcode installed by the package intel-microcode in Testing (2009-03-30) is way older than the one currently offered by Intel (2010-02-09), I only installed the package microcode.ctl and let it fetch the microcode. However, after reading the Read Me files, manual pages and system logs, and checking the directory where the microcode is stored, I have not been able to find an option to check the version of the microcode in use.
This is the output of update-intel-microcode:
Local version:
Remote version:
could not extract the actual data of remote microcode
I've installed firmware-iwlwifi I've modprobe -r'd and modprobed the iwlagn module I CAN scan, using iwlist wlan0 scanning, and I can see my essid, hovering in the distance. it is definitely broadcasting.
I use wicd and wicd-curses. No wireless show up in wicd-curses. ifup wlan0 gives me no dhcp offers received and slumbers again. from iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
from lspci:
03:00.0 Network controller: Intel Corporation WiFi Link 5100
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.
View 7 Replies View RelatedI've got a dual Xeon 5570 (Nehalem) server. It clocks down properly, but never, under any circumstances that I've found, clocks up past its TSC. Even when running basically nothing but cat /dev/zero > /dev/null, nothing gets clocked higher than the TSC. Below is the turbostat output, which clearly knows what the hardware is actually capable of, but it never actually achieves it. I'm running Lenny, with backported kernel 2.6.30-bpo.2-amd64. I tried the 2.6.32 backport and there wasn't any difference. know where I should look next? BIOS settings? Do I need to change some kernel option and recompile?
# ./turbostat
Nehalem multiplier 22, TSC frequency 2933 MHz
Nehalem 4 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 3 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 2 cores active: 25 mult, max turbo frequency = 3333 MHz
Nehalem 1 core active: 25 mult, max turbo frequency = 3333 MHz
[Code]...
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
running Debian Squeeze (standard 32bit squeeze Kernels linux-image-2.6.32-5-486 and linux-image-2.6.32-5-686) happily without trouble on a 64bit capable Samsung laptop featuring an Intel T3200 Dualcore processor. However, when I try to boot using the squeeze 64bit kernel (linux-image-2.6.32-5-amd64) the system proceeds through a few text lines immediately after Grub, and then performs a warm start.
The text output I get immediately after Grub look similar to the ones I get booting the 486 and 686 kernels, without any indication for the reboot behavior. The rebooting also seems to happen before any entry is written into the boot/system log files (logging is enabled). This behavior also occured when I first tried to prime the machine from the Debian squeeze install CD using the amd64 kernel. I'm generally happy with the 32bit kernels, but I'd like to use the amd64 support to do some Java compatibility testing for 64bit architectures.
The Laptop is a Samsung R510-Aura T3200 Delfina with the following Hardware and Setup (using Grub as boot loader):
- Intel Pentium Dual CPU T3200 @ 2.00GHz (see http://ark.intel.com/Product.aspx?id=37160 for details)
- NVIDIA GeForce 9200M GS
- 3GB RAM + 1GB reserved for GeForce
- Konfiguration Details:
-- Phoenix Bios
[Code]....
Maybe a strange BIOS-Setting that works with the 32bit kernels but not with the 64bit kernel? I've seen a post on here that indicates someone is running the amd64 kernel on a T3200 successfully, and the chip is definitely 64bit capable, so the reboot behavior is a complete mystery for me
The in build cipher algorithms that are in the kernel are not critically secured, the best, I think, supports 384 bit encryption.
So I was looking forward towards stuff like DSA or very preferably OTP cipher with like... 8192 bit encryption using DM, I know it sounds insane, but so is the data. I want it to be uncrackable for the fastest supercomputer combined till 2070.
I would like to use one time passwords with ssh.I know there is the RC Devs openotp library but I have found very little information on the web about how to use this with ssh or even if that is possible.
View 1 Replies View RelatedI've created live squeeze usb-hdd with xfce desktop and if I start it, I have UTC time. Howto set fix to UTC+02:00, before image creation?
View 2 Replies View RelatedI have two partitions in LVM. They are added in /etc/fstab to mount automatically. But, they are not working. The process to mount partitions seems to be happening before the service /etc/init.d/lvm2 is started. I can get it mounted using "mount -a" command, but not during the boot time. What should I do get it automatically mounted on every boot?
View 5 Replies View RelatedI'm running Debian Etch AMD64, and currently trying to clean up my system in preparation for an upgrade to Lenny. One problem I have is that resolvconf (which is installed) does not start at boot time, but if I start it manually then bring the NIC down and back up, it works OK, with no error/warning messages.
View 9 Replies View RelatedA windows server named SRV is sharing folders for each users in /share/From a Debian computer on network logged with the user session "foo" I can mount the remote directory /share/foo with:smbmount //SRV/share/$LOGNAME /remote_directorythen the prompt ask me for password and when I have gave it the remote directory is mounted correctly.Now I would like to make this at boot time.If I put the same command in the .bashrc, when I boot, the remote directory is not mounted when the session is opened but then if I open a console, it ask me for password and the directory is mounted.This way is not convenient and it would be better if the directory is mounted when the user open his session and using the same password.The point is that every user should have a his own remote directory mounted when the session is opened.
View 2 Replies View RelatedOn Debian Etch I used to understand how to change boot kernel parameters with Grub. You could just edit menu.lst.
With the newer Grub in Squeeze I am without a clue! I want to set up a ramdisk, say 128 Megs in size, and add that to my boot parameters so that it is created every time the machine starts. Do I set something in /etc/default/grub ?
I'm trying to stop all boot time messages from appearing -- basically I'd like to have a simple blank screen from grub to xdm.
I tried everything -- used the "quiet" option in grub's config, added dmesg -n 1 to rc.local, changed console=ttySx, set kernel.printk in sysctl.conf to 4 1 1 7, and even eradicated rsyslogd altogether... to no avail. I still see all sorts of messages on my screen.
2 months ago, I built a dedicated backup server using 4 2TB SATA drives for software RAID5 (6TB total). A few days ago, smartd sent out mail saying it found an unreadable sector on one of the drives. I ran selftest using smartctl and the error persisted. So far, neither software RAID nor ext4fs running on top of the RAID volume have reported errors.
MOST OPTIMISTIC: It is normal to have a few bad sectors among billions. Software RAID takes care of alternatives. Keep using the system until RAID spits a more serious warning in the future.
MOST PESSIMISTIC: It is a really bad sign to lead a disaster. No good disk drive should have bad sectors especially when it is only 2 months old. The error is simply not detected by software RAID and ext4. Replace the drive immediately and return the bad drive to the supplier.
I have installed php-devel successfully prior to go with the installation (yum install php-devel). Here is what I did;
1.wget "url
2.tar xjvf ffmpeg-php-0.6.0.tbz2
3.cd ffmpeg-php-0.6.0
4.phpize
5../configure
6.make
7.make install
code....