Debian Configuration :: How To Install Alsa Drivers Along With Asus Xonar Dgx Sound Card
Oct 2, 2015
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
I recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.
Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
Maybe sounds silly but I couldn't find on the web how to install my motherboard sound driver on Ubuntu 9.10 Karmic. I can't use my microphone and Linux can't identify my soundMAX sound card, but I have sound.
I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.
Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.
lspci shows:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) alsactl init gives: alsactl: init:1743: No soundcards found... alsamixer: cannot open mixer: No such device or address aplay -l: aplay: device_list:235: no soundcards found...
since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected
Alsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
It partially works but I got a couple of issues (using 10.04 x86-64). I use it with a Stereo headphones and a mic.
1) It only outputs in 7.1/5.1 mode and only on the left headphone. If I reselect 7.1/5.1 while an audio stream is playing then I get stereo back. I've checked with Ubuntu 10.10 live CD and apparently the left channel is mapped to front, while the right is mapped to sub-woofer. How can I fix this?
2) The mic doesn't work. When I select the Xonar D1, I can choose between Analog Input, Analog Line In and Analog Microphone. When I switch between those I can hear a click coming from my pc, as if something HW is switching. I tried playing around with alsamixer but it doesn't work. Any idea how to make the mic work?
I'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?
I install the ATI drivers yesterday and today I've realised that it broke my sound. I have a HDA nVidia sound card built in (with a Realtek chip), but when I run alsaconf, it doesn't find it. It tries to use either the ATI HDMI audio port or a legacy generic driver. Any hints as to how I can fix this?
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.59 !!################################
I have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
I'm using Ubuntu 10.10 and I had the sound on my Toshiba satellite laptop working and everything is fine-except for the built in mic..no response at all, I had to switch to windows whenever I want to use the mic "etc, skype calls"I Googled a little bit and upon this adviseI disabled alsa drivers using the commandssudo update-rc.d -f alsa removesudo update-rc.d -f alsa-utils remove and then downloaded oss debian package and installed it, as the advise said.But the result now is that I have no sound at all !! no mice nor speakers...any clue how to fix this ? how to enable alsa drivers again and return to"speakers working-mic not working ?
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
I can not set default sound card for alsa. It detects my sound card and I can play audio with xmms when I config that to use alsa and my intel sound card, but other applications which use default alsa sound card, and also pulse audio, can not play any sound.
I'm having issues with soundI cannot view my sound card in Gnome Alsa. It is not muted. It does work I tried to remove myself from the audio group but it won't allow me to i am sudo what might be going wrong when i click the buttons they do nothing in users and groups menu
I posted my question on Linx.com, but have not received an answer after 75 viewers to my question: Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up! In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
After I've installed an ASUS graphics card (ATI chip) my Ubuntu got no sound at all. My Codec is: VIA VT1708B 8-Ch. I've chosen "Internal Audio Analog Stereo" in Sound Preferences. Windows on the same machine works properly.
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Acer Incorporated [ALI] Device 0126 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
I have installed a Ubuntu Server 10.10 with fluxbox as X. Everything works fine except the sound. Either speakers or with headsets, it does not work at ALL. This is some informations that could help you. I need to listen music
I want to install the nvidia drivers from the repository (they seem quite updated lately). But i hit some issues:
# aptitude install nvidia-glx The following NEW packages will be installed: libgl1-nvidia-alternatives{ab} libgl1-nvidia-glx{ab} libglx-nvidia-alternatives{a} nvidia-glx nvidia-installer-cleanup{a} nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-support{a} nvidia-vdpau-driver{a}
[Code]...
Since the nvidia packages are in testing i assume they can be installed, do they?
I have an Asus A52J, my problem is that automute is not working well when I put on my headphones. There's solution for that in latest alsa source but I prefer to install it from repositories, I don't want to get my system dirty with make installs. Is there a way to get alsa packages version 1.0.24 as a package? It is safe and clean to install them from alsa page sources?
How do I install the proprietary drivers for an ASUS 901?
Im running wine and stuff that ran at full settings on my damn windows 98 computer are slow as balls. So I checked into drivers and it says I dont have any proprietary drivers installed and it didnt see any.
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
