Ubuntu Multimedia :: Recording Audio From Alsa Sound Card
Sep 26, 2010
I posted my question on Linx.com, but have not received an answer after 75 viewers to my question:
Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up!
In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
Is there any way in Debian to record streaming audio from the soundcard, after it has been decoded by a player or a browser?
Of course, the best way to record streaming audio is to grab the stream directly, but with emerging technologies, before the stream grabbers catch up, it can be difficult or impossible to directly grab a stream. The Akamai HDS format is a good example of this. The fragment packets are hard to grab individually and hard to combine. Something like [URL] .... didn't work for me.
Furthermore, as technology advances, stream grab techniques will have to play catchup.
But what normally works is capture from the soundcard, after the stream has been decoded by the player or browser. I have used Total Recorder [URL] .... on windows to do this for many years.
Is there a debian package that can capture sound from the soundcard, and save it as mp3 or ogg? And will this package run on the raspberry pi?
I'm trying to record music playing on my computer with the sound recorder/audacity but there is nothing audible being recorded. I've installed PulseAudio Volume control and selected monitor of internal analog stereo. I can't figure out if I have an output/input incorrectly selected but maybe someone could take a look at the screenshots and provide feedback! I have a dell xps 8100
I have a Sony VAIO VGN-FW200 laptop and I wanted to use Audacity or some other application to record sound. However, since there is no sound card, the only option is to use the microphone to record. Is there any way to get a free virtual sound card, or record without using one (and without using the microphone
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
I'd like to be able to record what's playing on my sound card. How do I do this, with audacity or whatever? There seems to be little information around and what of it I've tried has got me nowhere
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1) - HDA Intel: ALC888 Analog (hw:0,2) - spdif - default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Acer Incorporated [ALI] Device 0126 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
I can't seem to get my computer to record the audio from an application... Sound Recorder, Audacity, and outRec all output files but they are just silence, even though when I see them in a media player they show the visualizations. I have followed a couple guides to no avail.
My friend has following configuration Pentium 4 2.4 Ghz 256 MB DDR RAM Western Digital WD1600AVJS-63WNA0 hard disk PM8M-VHMS7104 VER 3.0 motherboard The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
with my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
My trusty Tascam us122 is now an ex-card (as the guys from MP would say). I'm looking for a new one:1. Obviously it has to play really nicely with linux2. it needs to have phantom powerI'll be using it for recording voice (a Behringer Studio Condenser Mic) and my electric guitar.
I encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
I have a question about audio recording. I've always wanted to set up a sort of personal studio. Not anything too professional, but I want to be able to make quality recordings without too many problems. All I'll probably end up using is a midi keyboard electric guitar and bass. But what I was wondering was, is it a better idea to get a Mac for something like that, or will Ubuntu support that just fine? I know there's great software available, and I've got used to using Jack. But I've read problems about real-time kernel support and xruns with Jack and Ardour, and I'm just wondering if that's something that will make using Ubuntu for this complicated.
I want to do a screen capture with audio and video. I use Ubuntu 10.04 64-bit.I have now spend about half a day trying various tools, most of which seem to be half finished or abandoned. I have not found any usable docs for any of these.gtk-recordmydesktop and xvidcap will both capture video, but seem unable to capture audio from a microphone. The mic is connected and the sound preferences "input" tab shows the input level jumping up when I speak, so it must be working.
I tried the pulse audio device chooser app to make sure the mic is selected, but the choices for input are DEFAULT and "other", which shows a blank input with no choices.xvidcap multi-frame dialog has dev/dsp pre-selected as the input device, with no other options. It does not work.If I enable audio with gtk-recordmydesktop, it refuses to start and says it cannot open the sound card. There is no apparently no way to do this using the "advanced" dialog which has DEFAULT preselected as the audio input device and no other options. /dev/dsp also fails to start.I spent some time searching google and the forums here, to no avail. So should I give up trying to do this with Linux or is there some obscure method I only need to discover?I prefer xvidcap, since the ogg format output by recordmydesktop seems to be a write-only format.
First up, let me say this post has almost nothing to do with Ubuntu, so you may ask: Then why am I here? I am here because I didn't know where else to turn.
My main problem here is that I would like to be able to record myself playing a video game on my TV, and be able to toss the file onto my computer to edit/upload. I've heard of 'Dazzle' those TV recorder things, but I'm looking for more of a home quickfix.
What I was thinking of doing was hooking up a DVD player to a tv. Then hooking up my wii to the DVD player, to the TV. This way the game would be displayed on channel three. If I were to do this, would I be able to put a blank DVD in the drive, and set it to record channel three? Since channel three will be my game, would it record the video game? I'm sure if it would, it wouldn't be the best quality.
I'm having issues with soundI cannot view my sound card in Gnome Alsa. It is not muted. It does work I tried to remove myself from the audio group but it won't allow me to i am sudo what might be going wrong when i click the buttons they do nothing in users and groups menu
Can I run this camera: Quote: Bus 001 Device 007: ID 046d:0809 Logitech, Inc as something other than a UVC driven camera? It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.
[Code]...
echo "Recording. Ctrl-C or close window to stop" Is there a driver other than 'v4l2' I can use that will give me 30 frames per second?
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
how can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS - recording audio with Sound Recorder - installed PulseAudio Device Choooser and PulseAudio Volume Control - Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.
Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.
lspci shows:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) alsactl init gives: alsactl: init:1743: No soundcards found... alsamixer: cannot open mixer: No such device or address aplay -l: aplay: device_list:235: no soundcards found...
since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected
I can not set default sound card for alsa. It detects my sound card and I can play audio with xmms when I config that to use alsa and my intel sound card, but other applications which use default alsa sound card, and also pulse audio, can not play any sound.
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
