I can not set default sound card for alsa. It detects my sound card and I can play audio with xmms when I config that to use alsa and my intel sound card, but other applications which use default alsa sound card, and also pulse audio, can not play any sound.
View 2 Replies
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedSkype now runs, but there is an error when attempting to use voice. When opened in terminal the error is thus: ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default Over and Over again. Am I missing a 32 bit library on my 64 bit machine? EDIT: Smiley face not intended
View 4 Replies View Relatedeverytime i use alsamixer command i get only the "Master" volume control, and i see the card its using is "Pulseaudio" so i press f6 to select the sound card and i found that i have "default" and "HDA SIS966" so i wanted to know how can i change that "default" to the HDA SIS966?.i tried pressing f6 and selecting the card but when i close alsamixer and run it again i get the "default" sound card again.
i left some pics, the 1st one is what i get when i run alsamixer, the 2nd is the options i got when i try to change the sound card, and the third is what i get with the card HDA SIS966 which is the one i'm trying to get as my default.
I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.
Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.
lspci shows:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
alsactl init gives:
alsactl: init:1743: No soundcards found...
alsamixer:
cannot open mixer: No such device or address
aplay -l:
aplay: device_list:235: no soundcards found...
since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected
[Code]...
make sound card recognized by alsa?
Code: !!Sound Servers on this system !!
----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
[Code]....
I'm having issues with soundI cannot view my sound card in Gnome Alsa. It is not muted. It does work I tried to remove myself from the audio group but it won't allow me to i am sudo what might be going wrong when i click the buttons they do nothing in users and groups menu
View 1 Replies View RelatedI posted my question on Linx.com, but have not received an answer after 75 viewers to my question:
Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up!
In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
I'm having trouble with my sound on my new Fedora 12 machine. when I first installed F12 sound was working but it appears that I have messed up some settings somewhere and now alsa is no longer recognizing my sound card (integrated into my ASUS M4A79XTD EVO motherboard)
Code:
$ aplay -l
aplay: device_list:223: no soundcards found...
I'm sure that when I tried to fix it I probably messed it up worse. Is there an easy way to restore all of my sound settings and audio Drivers back to the F12 defaults without losing everything else?
I have 2 sound cards : one is on board and other is Creative sound blaster.I want to play sounds just on Crative.The problem is when I reboot the PC the sound is change,sometime the default sound card is Creative sometime is the onboard card.I want my default sound card to be only Creative.
View 2 Replies View RelatedMy situation: I have a desktop, with the following sound systems internal to it:HDA IntelSBLive! I also have a Creative Labs webcam connected via USB and another device (VR goggles) which have an audio component.My problem: a fair number of game applications use ALSA card#0 to play games, now pulse's ALSA module is at best lacking, so I don't use that for games. At this point I ahve pulse configured to always use HDA Intel for it's sink, what I would like to do is to configure it so that the SBLive! card is always ALSA card#0, regardless if the 2 USB audio-ish devices are installed. That way pulse can be running and I still get to play the games with native ALSA audio. The trick is how do I force by SBLive card to _ALWAYS_ be card#0 ?Update: there is an easy way, that I should have realized before, which allows for ALSA games to use the SBLive without having it at index 0, below is how to do it:
1) cat /proc/asound/cards
example output (mine):
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
I'm using mythbuntu 10.10 with 2 pci tuner cards and 1 SB PCI sound card. My system is detecting my tuner cards as audio devices and making one of those my default sound cardWhich file do I change to make the SB card the default sound card?
View 2 Replies View RelatedI am having difficulty changing my default sound card in Kubuntu 11.04. I am able to use Phonon to change it for KDE applications; however, I am unable to accomplish this for VLC and Chromium.
View 2 Replies View RelatedI am having problems getting sound to work. I have pasted my output from AlsaInfo.sh in hopes that someone can assist me. I have been able to fix this with the AlsaCompile scripts for Ubuntu. I am wondering if this is a distro related issue. If not I will gladly send to the alsa project.
[url]
- One sidenote that I will mention is the fact that I DO HEAR SOUND from the following command (and only this command)
Code:
I have an s series gigabyte Mother board (GA-EP35-DS3L/S3L) I have just ordered a 2.1 stereo system supplying a base and 2 desk top speakers. The default output settings on the board does not include left and right speakers. Is it possible to alter the default outputs on the internal sound card via ubuntu? Under windows there is some software gigabyte supply which enables reallocation of the output sockets. What is available for Ubuntu?
View 4 Replies View RelatedI just got the upgrade for the Linux Kernel version 2.6.40-4 on my Fedora 15 x86-64 box today, and the installation completed with no problems. However when I rebooted after doing the upgrade, I noticed that I had no sound. I use an ATI Radeon HD 4350 video card, and the opensource ATI driver, and use the HDMI audio from it for sound, since my monitor has a sound output jack on it. I've booted into the previous kernel (2.6.38.8-35), and sound works fine. I've tried with the new kernel in both KDE (my default desktop environment) and XFCE to get sound, and it does not work in either one. I've tried installing the VLC Phonon Backend instead of the GStreamer Backend, reinstalling Pulseaudio, reinstalling Alsa, modprobing the necessary modules needed for the card, checking all configurations with the available Pulseaudio tools (paprefs, pavumeter, pavucontrol), checked the volumes using alsamixer, and reinstalling the ALSA Pulseaudio plugin. After trying all of these, I can still get no sound out of any application, and I also noticed that Flash video plays at 2-3 times it's normal speed after the upgrade. Again, these problems do not occur on my previous kernel. Did I maybe overlook something, or can anyone else think of something I could try?
View 14 Replies View RelatedMonths ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
My PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
[Code].....
I recently bought a logitech headset which is working very nice, the thing is that I cannot make it my default device when I plug it in. I edited /etc/modprobe.d/alsa-base.conf to make snd-usb-audio the default card but it only works when the computer is turned on with the headset plugged in. A workaround is to plug it and then "alsa force-reload" but I find it very ugly plus it kills all apps using audio and leaves the volume indicator unstable.
View 1 Replies View Relatedif so I shall have to abandon it again. I have a Motherboard Gigabyte GA-MA74GM-S2, which has an integral sound card. I can't put another sound card in as I have no spare slots.
View 3 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I've followed the steps outlined in the Fedora FAQ regarding sound issues. I am attempting to play some MP3 files using RhythmBox, and there's no sound. I have dug a bit deeper. I've tried alsamixer, and when I press F6 (Select Sound Card), I see three entries:
- (default)
0 HDA Intel
1 HDA NVidia
I have tried selecting a different sound card. When I select 1, I see this text: "This sound device does not have any controls". I have an NVidia GeForce 480 video card, but it has been suggested to me that I don't want to use it for sound. My speakers are in my monitor. I would assume that has ramifications on how I set things up for sound within Fedora. I have used some kind of sound test utility by executing this at the command prompt:
"speaker-test -c 2 -t wav".
I hear nothing. I don't know what to do next. If anyone can IM with me using Pidgin, that would be perfect
I have a sata card in my RHEL5 server that is not working. It has a 1.5tb hard drive attached to it that I would like to use. It seems that the 2.6.18 kernel did not detect and use it by default. I was able to find some info about the
lspci | grep VIA
03:06.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
