Ubuntu Multimedia :: Asus Xonar D1 - Mic Doesn't Work
Oct 18, 2010
I just got a Xonar D1 (chipset CMI 8788 ).
It partially works but I got a couple of issues (using 10.04 x86-64). I use it with a Stereo headphones and a mic.
1) It only outputs in 7.1/5.1 mode and only on the left headphone. If I reselect 7.1/5.1 while an audio stream is playing then I get stereo back. I've checked with Ubuntu 10.10 live CD and apparently the left channel is mapped to front, while the right is mapped to sub-woofer. How can I fix this?
2) The mic doesn't work. When I select the Xonar D1, I can choose between Analog Input, Analog Line In and Analog Microphone. When I switch between those I can hear a click coming from my pc, as if something HW is switching. I tried playing around with alsamixer but it doesn't work. Any idea how to make the mic work?
View 2 Replies
ADVERTISEMENT
Aug 11, 2010
I'm hoping some smart boffin around here could help me getting my asus xonar DX (PCI-e) working in debian 5. iv searched the net.
View 3 Replies
View Related
Jan 7, 2011
I just installed Maverick on an Asus Seashell 1215T netbook with an AMD/ATI chipset. The sound output is working fine (with the exception that I have to manually set output to either speakers or headphones rather than just plugging in headphones), but neither the internal microphone nor external microphones plugged in through the mic jack work. I do have the sound device set to the internal sound (rather than HDMI) and the volume level set appropriately. Apparently neither microphone is being recognized. Any ideas on what could be wrong?Here is the relevant section from lspci -v:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 841c
Flags: bus master, slow devsel, latency 64, IRQ 16
[code]....
View 9 Replies
View Related
Aug 31, 2010
I noticed that after compiling 2.6.35.4 that gnome-alsamixer has two new options for my ASUS XONAR D2X: "Dac Filter" and "Dac Oversampling", (I turned them both on and off and didn't notice any difference)
View 1 Replies
View Related
Mar 20, 2010
I recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.
Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.
[Code]...
View 9 Replies
View Related
Oct 2, 2015
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
View 3 Replies
View Related
May 2, 2010
I have installed it in multiple machines (servers, desktops, laptops)I have even installed 10.04 beta in several laptops for educational purposes without a single crash. But 10.04 crashes in laptop ASUS X50GL with processor Intel Core 2 Duo T5800.In fresh installation, it hangs always, in ANY 10.04 version, beta or stable, 32 or 64 bit, also from iso image in CD or in usb stick,I have tried all possibilities!Therefore, clever enough, I though let's do it in an indirect way: let's install the 8.04 distro (it works) and later on I will upgrade to 10.04. So I just did.Everything was fine (also the upgrade, without a single warning) until final reboot after upgrade to 10.04.hanged at boot!. There is incompatibility between 10.04 and this firmware, clearly. Unfortunately, 10.04 is not yet stable, I guess.I took a picture of the screen which I attach.
View 4 Replies
View Related
May 20, 2011
i have an asus 1201n, with nvidia proprietary driver, ubuntu 10.10.i have tried to install plymouth-manager, tried to change the theme.i have tried to change screen resolution.nothing works.i really want to change the default theme to the space-sunrise.
View 6 Replies
View Related
Mar 23, 2009
Centos 5.2 Asus Eee box with Atom N270 and it came installed with "eLinux" which doesn't even come close to meeting my needs (low demand intranet server). But eLinux did work as far as I tested it.
First, CentOS seems to detect the Intel 945GME video chip but I end up with a blank screen. I used text mode to install CentOS. Then I searched for a solution. Found someone suggested also using the i915 driver with 945GM. That didn't work.
So, I reverted to a VESA driver. That worked except I couldn't get resolution greater than 800x600 even after I added a Mode line for 1024x768 to the xorg.conf file. However, the X interface wasn't that important. I mostly wanted into the utilities so I could fix the network.
I had tried a fixed address (192.168.1.11) since the box is supposed to be a "thin server." No luck. So, I tried DNS and tried activating again. The suggestion was that the network cable wasn't connected. When using DNS, the network hub lights flash. Something is happening.
Rebooted the computer using Puppy Linux (on a usb key). Video comes up in VESA mode. I can set it to 1024x768. It found the DNS server without any complaints. (Note: I didn't so much as touch the ethernet cable during the reboot).
Copying and Pasting isn't easy with a computer that won't connect to the LAN. But the hardware is a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 2). I since tried Slackware 12.1 and it's pretty happy on that box. Vesa mode gets me 1024x768 and the ethernet works (however it thinks it's on eth1 which may or may not be a clue). I'll try CentOS on an old box for other testing.
View 6 Replies
View Related
Jan 10, 2011
I has just got Asus N53JN, i have tried to installed both Ubuntu 10.04 and 10.10 but the speaker not work.lspci | grep Audio00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: ALC259 Analog [ALC259 Analog]
[code]....
View 1 Replies
View Related
May 10, 2010
There are currently two options for nVidia drivers in Lucid Lynx, 173, and current. With the video card in my laptop, 9650m GT, the 173 drivers work but Docky is painfully, unusably slow. With the "current" drivers, Docky is fine but I get progressively worse and worse static-type lines across my screen and eventually it the machine restarts itself. I've tried installing drivers manually but they won't compile against the kernel.
Before installing Lucid, I had 9.04 Jaunty installed, and Docky (at the time still merged with gnome-do) worked without a hitch. I ran into this error first when I installed 9.10 and decided to go back to 9.04, hoping that it would be fixed. I can't remember which version of the nVidia drivers I was using in Jaunty, but is there any way to go back to those drivers in Lucid?
View 2 Replies
View Related
May 2, 2011
I've just brought a Asus Xonar DG and put it in my case - and found out that it's about the only card that is not easy to get working.I've updated my ALSA to 1.0.24 using this how-to. Then I reinstalled pulse with all the utilities and got it to look like working, with one problem only: no sound is output.I use Rythmbox for playback. In pavucontrol the bar below the soundcard output indicates that there's something playing, but no sound gets to my headphones. Has anyone encountered that? I've tried nearly all combinations of setting the output devices in various places like Sound settings and pavucontrol, but none worked.
View 4 Replies
View Related
Mar 10, 2011
I just bought a Xonar D2X. Wonderful thing - recording from mic and quality of output to speakers is superb... on my Windows install. : /
It appears to work correctly in Kubuntu 10.10 as when I open up Sound and Video configuration, I can see it listed correctly and when I hit "Test", I get the annoying Ubuntu tinkle-plonk. But no application I use seems willing to use it. In fact, both Optical Outs (the motherboard's and the soundcards) are working fine when I try playing a test sound from this panel, but neither seems to be output to by VLC, Spotify or anything else I've tried.
I have set the entry "Xonar D2X Multichannel (IEC958 (S/PDIF)) Digital Audio Output to the preferred option for all output. Silence.
How do I convince VLC, Spotify et al, that the card really is there and they're really, really welcome to use it?
View 2 Replies
View Related
May 23, 2011
I'm running Ubuntu 11.04 x32, and after some research I haven't succeed getting my soundcard to work.Soundcard is detected but not sound comming from speakers.This is what aplay -l says:
Code:
card 0: STH6 [Xonar ST+H6], device 0: Multichannel [Multichannel]
Subdevices: 1/1
[code]....
View 4 Replies
View Related
Jun 5, 2011
It seems my Xonar soundcard is not detected by Suse, is there anything I can do about this?
View 9 Replies
View Related
Jan 22, 2011
Ubuntu 10.10 x64 worked out of the box for me but there is one irritating issue.
I have Xonar DS(Oxygen HD Audio) with analogue 2.1 speakers and spdif passthrough to nvidia GTX260 hdmi output for my tv.
It makes random cracking noise on tv unless something is played, no matter on analogue or digital output, then is noiseless.
Alsa 1.0.23, kernel 2.6.35
View 3 Replies
View Related
Sep 1, 2011
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Mar 9, 2010
It's been almost two months since this problem started. I'm running 9.10, Karmic Koala, with all updates. I was hoping one of the updates would just fix this problem.
The microphone does not appear to work at all. It seems to exist because I have a choice for "Internal Audio Analog Stereo" under "sound preferences," but I don't know how else to check whether this is true. Sound Recorder does not record anything and Skype does not capture any sound from me.
how to run commands in the terminal and I consider myself an intermediate user, I just don't know anything about sound.
View 3 Replies
View Related
Apr 30, 2010
I just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....
View 9 Replies
View Related
May 31, 2010
I have a problem with the BBC iplayer. I've upgraded ubuntu to 10.04 and iplayer has stopped working. The iplayer desktop refuses to run, both when the desktop (or menu item) is clicked, and also when a download is clicked on the iplayer site. I've tried uninstalling AdobeAir, and reinstalling. Also, I've completely removed AdobeAir and Iplayer and reinstalled. Still nothing. I'm running 10.04 on a Lenovo 3000 N200 with an Intel Centrino dual core. Flummoxed I'm flummoxed.
View 5 Replies
View Related
Jul 10, 2010
I'm running Ubuntu 10.04, using Audacity 1.3.12 beta... and trying to get it to work with a USB Mic.
In Audacity ALSA I/O preferences, I can select the USB mic. But when I record, the input meter stays at about half-way and does not fluctuate when I speak into the microphone... I can hear myself very faintly on the playback... but it is very quiet and there is a loud buzzing. There are no mechanical reasons for this buzzing, such as computer fan, etc...
Also, I cannot find the USB mic in Ubuntu Sound Prefereces...
This is from "Device Info" in audacity:
View 2 Replies
View Related
Sep 6, 2010
i just installed ubuntu netbook remix 10.04.1 on an aspire one 532h netbook, and everything works great except i cant get the mic to work with skype. i know the mic is working correctly because i tried it in sound recorder and was able to record and playback my voice.all sound levels are where they should be, and everything seems to be in order. i'm using the latest beta of skype also. i installed pavucontrol but that didn't do anything.because the mic is working, i'm beginning to think it may be a problem with skype.
View 4 Replies
View Related
Apr 7, 2011
My friend has an ASUS eee r101 computer and uses Ubuntu 10.10.. We wanted to chat on skype but it seems her mic doesn't work.
View 3 Replies
View Related
Jan 3, 2010
l installed thelatest beta version of skype from officila skype on my ubuntu 9.10,but my webcam doesn' t work and l can not see other webcams, lt work correctly with amsn and cheese
View 1 Replies
View Related
Feb 5, 2010
I got a webcam and it works fine with cheese, skype and many other programs. But with jmf or mplayer it doesn't work.
With mplayer I used this command mplayer tv:// -tv driver=v4l:width=640:height=480:device=/dev/video0
Both jmf and mplayer just give static looking like this [url]
View 1 Replies
View Related
Feb 18, 2010
I am experiencing a strange problem. I have two vga monitors and a ATI Radeon HD 3300 embedded on my motherboard. My embedded graphics card has a vga and dvi output. When I plug my monitors in (one uses a dvi to vga dongle) only the one with out the dongle gets a signal. I can swap which monitor uses the dongle and still only the one that does not use the dongle gets a signal (both monitors work, only if they are not using a dongle). Both Ubuntu and Windows are having trouble displaying video, but no trouble detecting the monitors (display settings show both monitors but do not tell me good resolutions for them). My friend has a different dvi to vga dongle, his only has about half of the dvi pins while mine has all the pins. Could the problem be that my dongle has all the dvi pins
View 5 Replies
View Related
Apr 21, 2010
just got this netbook like 2 days and tried out windows 7 which it came with but hated it so i switched to ubuntu netbook remix but i noticed i cant use skype on it which is pretty important for me. i basically just reinstalled it and or osme reason it worked this time
View 2 Replies
View Related
Jul 14, 2010
I have a hda-intel soundcard which is working perfectly with alsa on Kubuntu 10.4. The only problem is the microphone.
Apparently I am not able to make it capture any sound or the sound is horrible:
- it works only in QArecord after I check the "Capture" checkbox.
-it doesn't work at all for Flash even if I Allow Flsh to use my mic
-it doesn't work at all for vmware player (I have a winxp guest os)
-in Skype for Linux it works only if I set Microphone boost to 100%, but the sound is too weak and distorted.
In alsa mixer I have enabled all 3 Capture sliders to 100%, the Mic is at 100%, Input sources are all 3 set up as Mic.
The microphone doesn't work at all for any application if I use FrontMic instead of Mic.
Being able to use the microphone in Skype and VMware player is very important to me and it's the only thing keeping me from using linux as my main OS.
Note: I have tried Slackware and I have the same issues there too.
View 1 Replies
View Related
