I have installed a Ubuntu Server 10.10 with fluxbox as X. Everything works fine except the sound. Either speakers or with headsets, it does not work at ALL. This is some informations that could help you. I need to listen music
[Code]...
just installed opensuse 11.3 on my asus eee pc 1018p and have severe problems to make the wireless network card work. tried to install the driver with ndiswrapper and b43-cutter, but without any success. ifconfig does not show any wlan0 device. below find output of
lspci -v
dmesg
ifconfig
installed opensuse on several notebooks/netbooks before but never ran into serious trouble.
[code]...
I've spent the past 2 days attempting to get the sound working on a Toshiba A75 notebook. Here is what i've tried so far:
remove/purge alsa and pulse audio then reinstall
set up/configure OSS
download and compile latest alsa drivers. code...
My questions are: is there anyone using this laptop on Lucid with sound? Can anyone provide a new idea how to make this work if it is compatible hardware.
There is no sound on my Debian notebook.I added myself to "audio" group and have "alsa-utils", "pulseaudio", and "firmware-linux" packages installed.
However when I try to play an audio file there is no sound regardless of volume settings.
Code: Select all386,0,0>pthfdr@SALAMAND:/media/pthfdr/SORCNYTH/Media/Audio/Disc 1$ play -V4 01.(I Can't Get No) Satisfaction.mp3
play DBUG formats: opening format plugin `lsx_alsa_format_fn': library 0xc3a680, entry point 0x7f9d270ea8e0
play DBUG formats: opening format plugin `lsx_amr_nb_format_fn': library 0xc3bde0, entry point 0x7f9d269e6690
play DBUG formats: opening format plugin `lsx_amr_wb_format_fn': library 0xc3cb80, entry point 0x7f9d265b81a0
[ode]....
After I've installed an ASUS graphics card (ATI chip) my Ubuntu got no sound at all. My Codec is: VIA VT1708B 8-Ch. I've chosen "Internal Audio Analog Stereo" in Sound Preferences. Windows on the same machine works properly.
View 3 Replies View RelatedI am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...
New eeePC 1015PEM netbook, 2GB RAM, 250GB HDD. Came with Win 7 Starter; I retained this and installed openSUSE 11.3 alongside. Everything works well in Win 7 Most things also work well in oS 11.3, but there is a knotty problem with audio from the built-in speakers. Headphones are OK, but the speakers don't work reliably. Others have reported this on similar machines, and a number of "fixes" have been proposed in a wide range of forums, but so far I haven't found any that work.
I've actually installed oS 11.3 twice. After the first install I had no speaker sound at all, but after a day or two fiddling around it started to work of its own accord for no reason I could point to. For unrelated reasons (a silly mistake by me in Win 7) I then had to re-install oS 11.3 from scratch. This time the speaker sound worked after install, but then it dropped out again a couple of days later. Headphone audio has remained OK throughout.
I'm aware of and have applied the acpi_osi=Linux kernel parameter to enable the Fn keys on the machine (including sound volume and mute/unmute), so it's not that. I've combed the forums and Google extensively for other suggestions, and have tried them - including installing alsamixergui. I've also installed a properly matched ALSA KMP which changed some of the alsamixer controls but didn't cure the problem. Since it all works very well in Win7 and works sometimes in oS 11.3, I conclude that the problem is not with hardware but is something in software.
I have recently moved to 9:10 and I found some problems with the sound card Intel. Reading some posts I managed to partially solve the problem and now I hear the music perfectly but only from the headphones: but I need to "unflug" external amplifier in gnome-alsa-mixer each time I reboot otherwise I not even feel the headphones
lspci:
00:1 e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
aplay-l
[Code]...
Ever since switching to Ubuntu (Hardy at the time) I have had no luck getting my TV Tuner to work. I think the closest I have come is finding this information but it didn't really help and I'm not sure if it's relevant. Can anyone help? I have attached the relevant output of lsusb -v***EDIT***Further to this I have read these instructions and I get the following result.
Code:
michael@michael-laptop:~/v4l-dvb$ sudo modprobe dvb-usb-dib0700
WARNING: Error inserting dib0070 (/lib/modules/2.6.32-19-
[code]....
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies View RelatedI'm trying to make the microphone work on an Asus G1S. Neither the internal analog microphone nor the external one is recognized. 50-sound.conf in Modprobe.d has :
options snd slots=snd-hda-intel
# u1Nb.ULiNFUWt9WF:Asus M51S series
alias snd-card-0 snd-hda-intel
[code]....
i've a asus eeepc with an Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) with Karmic Koala, my GLX version is 1.2 , is it possible to upgrade in some way to GLX 1.3??
View 3 Replies View Relatedcheck if Graphics Card has been configured correctly?
Code: sudo lspci | grep -i vga
grep -i driver /etc/X11/xorg.conf
I installed the 10.10 version in an Asus eeepc 1005PEB and it freezes sometimes, no reason. I tried to put that in the Terminal thing, but first I did it and said that the VGA controller was Intel Corporation N10 family integrated graphics controller. I put the second thing (grep -i driver /etc/X11/xorg.conf) and it said it didn't find the file. I can't reproduce exactly what it said because I closed the window and when I tried to do the thing all over again, I posted the sudo lspci | grep -i vga, it demanded the pass and it wouldn't let me type it, I don't know why... I'm not an expert with computers, in fact I'm learning how to do these kind of things.
I can't get my Asus Eeepc 1005HA to boot from usb so as to re install Ubuntu. I did it right once - obviously - and now have a malfunctioning dual boot partition. My memory is of having to hit a function key repeatedly once I'd changed the BIOS and restarted the computer. Asus forums all repeatedly give me the same advice - F2 for BIOS, F10 to save settings then it should boot up, but --- nothing --- works.
So. Any additional or creative advice? The computer doesn't have a CD drive. My thumb drive is a Delkin 4gig... are there thumb drives known to work for this operation?
I've tried a few suggestions in similar threads.. to no avail. I thought I had it fixed a few days ago when I noticed that the wireless would randomly disconnect only on battery power. So I tried "iwconfig wlan0 power off" and then reconnected. It worked, for a while, but then after minutes/hours later it will disconnect and stay disconnected until I restart. If you need anymore information, let me know. I might need to be walked through the process; though, as I'm a worthless noob.
View 1 Replies View Relatedhow to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
I take it home turns out its a eee pc asus with linux. there isnt even a cd drive on this computer, i am currently using my wife's computer trying to learn about linux, never used this OS before, I know nothing past the general windows xp user. well i start it up and there is a username and password, how do i reset this password? i read all about this GRUB and command prompts but i dunno even know how to get to command promts, and i dont know anyone smart. and i cant use a password recovery disc cause there is no cd rom.
View 9 Replies View RelatedI have an eeepc 1101HA with NBR 9.10 dual boot with XP Home
I have been using this configuration successfully for months, after quite a bit of work fixing the sound issues, wifi issues and video issues. It still has a standby issue, but its liveable and Im quite happy with its performance for such an inexpensive machine.
I tried to boot to XP today, and I must have picked the recovery partition by mistake out of the grub menu.
It loaded "windows pre-execution environment" and then asked me if i wanted to run recovery. I told it to cancel before it did anything, or so I thought.
It only had 10-15 seconds, so whatever it did couldn't have been much.
When it rebooted I got this error.
Code:
I booted to a usb stick with the 9.10 live environment, and ran fdisk
Code:
Does anyone know what I can do to recover this partition?
I've recently installed ubuntu 10.10 alongside windows vista as a dual-boot on both of my computers. This question pertains to my asus eeePC 900HD. I'm quite new to ubuntu, so I'm sure I'll be needing a lot of .
I was having the problem of the computer freezing up when I unplugged it, I seem to have that fixed (gconf settings).One similar problem remains. After a minute or so of the computer being idle, the screen will fade to black, then, once the mouse is touched or a key pressed, the computer comes out of its idle state and prompts for a password. I've opened 'gconf-editor'/apps/gnome-power-manager/ and in the /actions directors set the values of 'sleep_type_ac' and 'sleep_type_battery' to 'nothing'. In /backlight I've switched the values of 'dpms_method_ac' and 'dpms_method_battery' to 'off'. Also in /backlight I've switched the values of 'idle_dim_battery' and 'idle_dim_ac' to 'false', and just to be sure, set the 'idle_brightness' to 100% and the 'idle_dim_time' to 999.
i've just installed ubuntu netbook remix 10.10 on my asus eeepc 1015p. whether i use an ethernet cable or wireless, i can establish a connection, but i can't access any websites through firefox or get software via the software manager.
i've attached some terminal screenshots from my attempts at troubleshooting, which i think contain all the relevant hardware info.
i've already searched the forums and see a lot of problems similar to mine, but none seem to involve the same combination of hardware / ubuntu version as me. since i have no experience, i'm hesitant to try to apply solutions that i don't understand and in which i'm not totally confident.
I tried to run Ubuntu 10.10 - Netbook and Ubuntu 10.4 live CDs on my ASUS 901.
Both run well.
But neither reboot after clean install.
After the machines BIOS splash screen there is just a blinking cursor at the left top of the screen. No ubuntu/linux/kernel messages whatsoever.
I tried installing both versions on both SSD-s (4GB & 32GB) and ensured the BIOS was correctly set to boot from the correct one.
I searched the net quite a lot but didn't find anything that could relate to an ASUS 901
I have, in vain, tried to run or install Ubuntu Netbook Edition on an Asus Eeepc 1001PX.I have downloaded ubuntu-10.10-netbook-i386.iso and checked its md5sum, set up the installation media to both an USB-stick and a SD memory card using Universal-USB-Installer-1.8.3.3.exe and the Ubuntu Startup Disk Creator.The Asus already has an Ubuntu 10.10 Desktop which was easily installed using the same procedure.
View 1 Replies View RelatedI've just installed 10.10 Netbook remix on my netbook and I am experiencing problems with the applications requiring repeated clicks to launch. Has anyone come across any fixes to this issue? I have reverted to logging into a Desktop session in the meantime but do like the netbook optimised screen layout.
View 3 Replies View Relatedok i have a asus eeePC:
i installed puppy linux on my KINGSTON data traveler G2 and i cant figure out how i select my flash drive from the boot esc menu ive tried changing the boot settings
oh yea the flash drive is 5 gigs so i want to use its memory
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
Hardware Address: 1C:4B6:85:13:F4
Driver: ath9k
Speed: 1 Mb/s
Security: WEP
[Code].....
I have problems installing Ubuntu Netbook Edition (ubuntu-10.10-netbook-i386.iso)on Asus eeepc 1001PX. code...
I have tried both Universal-USB-Installer-1.8.3.3.exe and the Ubuntu start up disk creator to prepare my USB-stick.
I have earlier installed the Ubuntu desktop 10.10 on the same machine with the same method without problems.
Within a dual boot option two os are now available on the asus eeepc 1005ha,
(1) the windows xp system and in addition (2) the linux 11.1 version of opensuse.
After and also during the installation process of the linux 11.1 os, an error message had occured:
No network found!
I tried to fix it by changing some settings (network manager on/off), but no
improvement could be achieved. Some people argue to wait for a kernel
update higher than *.27.*
Somebody knows something how to fix the network (eth0) internet connection?
I've been through a few versions of Slackware on my Asus EeePC and I must, despite that fact that every has been having lots of trouble (or so I've heard) configuring Linux on it, it hasn't been all that bad for me. One problem that continues to persist is that the brightness setting is weird. It doesn't like to display on full brightness most the time, and when I try to change the brightness (function keys or OS function), it goes through 3 'mini-cycles'.
I've tried the Alien eeepc-acpi-scripts slackbuild a while back and it didn't work for me before. While searching for another solution, I found this thread on the Ubuntu forums: [URL]. But the major fix that seems to be working for them involves editing GRUB (which I don't have). Another post suggests simply updating the BIOS, but the BIOS updater is a Windows executable, and I'm not quite sure how he pulled it off in Linux.
Installed on my notebook ASUS X59SL Fedora 13. Once logged in, 10-15 minutes in the right half of the monitor changes color from blue to green with small ripples. That same thing happened on my Fedora 12 on kernel versions above 2.6.31.12-174.2.22.fc12.i686.PAE. Needless to Fedora 13 work under this kernel.
View 4 Replies View RelatedI have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.