Debian Configuration :: NIC Goes To Sleep And Doesn't Come Up Again
Aug 5, 2015
i have the following problem which i couldnt solve in the past weeks. We have two Server with an onboard "Atheros AR8161 Gigabit Ethernet (rev 10)" and a quad "Realtek RTL8111/8168B" network adapter connected via PCIe. One of the servers is running Debian Wheezy with a custom 3.2.53Kernel (compiled from linus repository) and the second one runs Debian Jessie with stock kernel. Both are running XFCE4.
Each of the computers are connected to a local network (192.168.0.1 respectively .2) and to the intranet of our institute (10.20.0.81 respectively .82). After a random time they are not accessible via the intranet (ping doesnt work, ssh gives no route to host). However, i can still ping them over the local network. Also, at the moment i try to establish a ssh connection over the local network, the computer is again acessible via the intranet.
I already tried the boot options acpi=off and pcie_aspm=off without success. Additionally we switched from the onboard Atheros NIC to the Realtek, but everything stays the same. Therefore i don't believe that it is driver related.
For me it looks like that the NIC goes to an energy saving mode which is not handled correctly by our intranet. However, how can i avoid that the NIC goes to energy saving state? Is there a way to disable the D-states?
View 3 Replies
ADVERTISEMENT
Jan 27, 2010
I'm using a laptop as a mini server, but I haven't figured out how to sleep the display. I am not using the gnome desktop - I shut the lid but the display stays on.
ps - I should note - this is Debian 5.0.3 PPC version running on a PowerBook G4
View 3 Replies
View Related
Feb 14, 2016
I have Debian Jessie 8 installed on a Acer 5733 Laptop. After I closed the screen, it goes sleeping, and when I open it, aleatory, it freezes. I don't have graphical interface, and the tty are not accessible. Sometimes, I get access to the computer 10 seconds, and then freeze.I have to shutdown the computer...and lose my work I was doing.I thought it was a X-problem, but the tty don't work too, so it's not ? When I restart the computer, it shows Code: Select allclearing orphaned inode <some inode number.
View 0 Replies
View Related
Feb 3, 2016
I have a strange problem in my new debian 8.3 LXDE install. Every time I boot my laptop it goes in to sleep mode automatically after a min. It is a default install and I have not configured any power management options. How do I find out the reason for the automatic sleep and how can I rectify it?
View 4 Replies
View Related
Jul 20, 2011
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
View 1 Replies
View Related
Jul 25, 2009
Anyone noticing intermittent problems with the screensaver not kicking in or the display not sleeping? This is in gnome under F11.I have the Power Management Preferences set to put the display to sleep after 30 minutes of inactivity and gnome screensaver is configured for 5 minutes idle time.On a regular basis, I'll leave my computer come back anda) the screensaver hasn't kicked inorb) the screensaver kicked in, but the power management features didn't kick in to put the display to sleep.It seems to be an intermittent problem and usually it goes away after I restart X, but then at some point it comes back. In the past, I've gotten in the habit of being logged in for weeks/months at a time but I find that I can't go more than a few hours without logging out and back in or else the screen won't go to sleep.
View 14 Replies
View Related
Jul 14, 2011
I have installed Squeeze on my laptop, an Acer 5315.The fans never turn on, and the laptop eventually overheats and shuts off.This is not a hardware problem, because Lenny, on another partition, works fine.I have poked around, and discovered that the temperature sensor, as reported by "acpi -V", and in /sys/devices/virtual/thermal, does not get updated. It seems to get read at boot, but the reading never changes, no matter how hot the machine gets.
Specifically, if the machine is cool, acpi reports 40 degrees C, and goes on reporting the same number until the machine overheats and shuts down.On the other hand, if the machine is hot (because it's been running without the fan), and I reboot, then the reading at boot is usually either 75 or 85, and the fan turns on during boot, and stays on, at high speed, until the next reboot, and the reading never changes during the whole time
View 2 Replies
View Related
Aug 16, 2015
I'm using debian 8 on a notebook and since I tried to get the wifi working (another story...) I wanted to unload and load the alx driver module. So I used rmmod alx and when I tried to reload with modprobe, it didn't find the device (not the module). So I rebooted and now the notebook won't start. There's just the emrgency mode, so I log in as root and journalctl -xb gives me some erros:
Code: Select allsystemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Failed to start Load Kernel Modules.Unit systemd-mdoules-load.service entered failed state.Then it fails to start the modules ip, ppdev, parport_pc and fuse.Next error is
Code: Select allboot-efi.mount mount process exited, code=exited, status=32
Failed to mount /boot/efi.Followed by
Code: Select allDependency failed for Local File System.
And last but not least
Code: Select allFailed at step EXEC spawning /bin/plymouth: No such file or directory.
There was also an error at the first time "Failed to load autofs4", so loaded it manually with modprobe. As this worked, I opened the /etc/modules - which was empty, don't know whethere it was also empty before or not - and wrote autofs4 in the file. autofs4 seems to load succesfully, so I tried writing also ip, ppdev, parport_pc and fuse, but I just get the error for these last four twice... But lsmod shows some loaded modules (autofs4, ext4, crc16, mbcache, also alx and say 15 more).You should also know that I use an extra boot partition and use EFI.
View 8 Replies
View Related
Apr 11, 2016
I have had to revert my VM to a previous image (did something to screw it up) anyway I have to reinstall icedove into my VM and I noticed after doing: sudo apt-get update && sudo apt-get install icedove that icedove can't seem to be found in the libraries anymore and simply wont install.
View 14 Replies
View Related
Jun 8, 2010
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
View 1 Replies
View Related
Jul 17, 2010
I bought a laptop : Samsung R580 and when i want to install Debian Squeeze with NetInstall, it's impossible because ma Ethernet Card isn't recognized.These are the caracteristics of my card :PCI ID : 11ab4381Supporté : YesFabricant : Marvell Technology Group Ltd.Matériel : 88E8059 PCI-E Gigabit Ethernet ControllerPilote : sky2The driver is not in the kernel 2.6.32 and i must to wait a new kernel version in Debian?
View 8 Replies
View Related
Aug 5, 2011
After to install Debian Sid, i can't to connect to my network. When i launch lsmod, ath9k is present so the module is enabled.I don't use network-manager-gnome, wicd and other, i modify myself /etc/network/interface. But even with this configuration, the wifi does not works.
View 3 Replies
View Related
Sep 10, 2011
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies
View Related
Jun 18, 2015
Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
● mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
View 4 Replies
View Related
Nov 20, 2015
So, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
View 3 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Jun 3, 2010
I need to set up a little virtual network with Debian Lenny guests (the host is Debian Squeeze, but I don't think it matters). I installed Lenny in a VM and it works fine. Then I cloned the hard drive, garion@Laptop:~$ VBoxManage clonevdi Linux 1.vdi Linux 2.vdi created a new VM with exactly the same settings as the first one and booted the new disc. The problem is that there's no eth0 in the new VM, but it is in the original one. Also if I "unplug" the cable, dmesg won't notice anything. In the original VM it works fine. They both have the same virtual network card: PCnet-FAST III (Am79C973). I've also tried NAT as well as internal network settings.
View 2 Replies
View Related
Dec 9, 2010
I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies
View Related
Feb 14, 2011
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
View 9 Replies
View Related
Jan 21, 2010
Conky does not start during start up.I used this script, It has execute permission also!But it did not start! What is the problem!It works manually when i run that script!
Note: It is not working in the background also at startup as i checked it -When is run killall conky it showed No such process
View 2 Replies
View Related
Jun 19, 2014
I installed Debian Kit on my Asus Nexus 7 tablet, and after following the installation tutorial I got it running except for I'm stuck on the step to create a new user. (btw link: [URL] .... )
Here's how it went (I can't copy&paste from my tablet so I have to type out everything...):
Code: Select allroot@android-6c40984c21c156ae:/# adduser paul374
Adding user `paul374' ...
Adding new group `paul374' (5000) ...
Adding new user `paul374' (5000) with group `paul374' ...
Creating home directory `/home/paul374' ...
[Code] ....
So since I read somewhere that selinux had some permission problem, so I did a few chcons:
Code: Select allchcon --user=u --role=r --type=init --range=s0 /etc/passwd
chcon --user=u --role=r --type=init --range=s0 /etc/shadow
chcon --user=u --role=r --type=init --range=s0 /etc/gshadow
And it did take effect:
Code: Select allroot@android-6c40984c21c156ae:/# ls -Z | grep passwd
u:r:init:s0 passwd
u:object_r:unlabeled:s0 passwd-
root@android-6c40984c21c156ae:/# ls -Z | grep shadow
u:r:init:s0 gshadow
u:object_r:unlabeled:s0 gshadow-
u:r:init:s0 shadow
u:object_r:unlabeled:s0 shadow-
...but still same thing as what happened in the beginning...
Anyway my goal is to create and be able to log in to another user so that I'm not stuck running root all the time. (Which, as we all know, is a bad idea.)
If there's a way to manually create the user by editing a few files, and root still won't be able to change passwords, I'm fine with that, as long as I have another user. Whatever it takes to just get a non-root user log-in-able...
I forgot to mention that since this is the Asus Nexus 7, there is no removable media, so chrooting from another Linux machine isn't an option, and neither is removing an SD card to use a LiveCD on it.
View 8 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
Jun 21, 2015
i created a second instance of postfix.It isn' t the first time that i made this procedure but with debian i had a lot of problem.I think that the problem is chroot configuration of postfix .In the first i had two problem smtp “fatal: unknown service: smtp/tcp” and the second instance was enable to make nslookup of domain.I copied the necessary file in /var/spool/postfix-second-instace and i solved the errors.Now the problem is that there aren't error in log file but connect to xxx.xxx.net[yyy.nn.yyy.yyy]:25: Connection timed out for all connection. and the email are all in defer directory and the second instance doesn' t send emails.
View 4 Replies
View Related
Mar 27, 2016
Debian configurating, so I try to use wifi adapter, but it doesn't work. I have installed Debian Jessie from netinst CD. To reach perfect speed no options were selected. After I installed xfce4 and xfce4-goodies.I follow some different instructions and no dice. Wicd show me no avalable wifi connections. used Ubuntu 14, Ubuntu 12, etc. and I didn't have any problems with wi-fi connections. Some outputs of comands...
Code: Select allsatyva@meliorD:~$ cat /etc/debian_version
8.3
Code: Select allsatyva@meliorD:~$ lspci | grep 4313
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
[code]....
View 4 Replies
View Related
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
Dec 6, 2010
I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
View 1 Replies
View Related
Dec 21, 2010
I have used /etc/fonts/local.conf to control how the fonts looks like in my laptop, which runs a Gentoo. In particular, I don't want anti-aliasing. I copied the file to my Debian desktop, but it seems the file doesn't take effect, even after reboot. Do I need to do something else to make it take effect?
View 5 Replies
View Related
May 2, 2011
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa
[code]....
View 3 Replies
View Related
Jan 19, 2011
Cairo-Dock corrupts on suspend resume.My problem is that cairo-dock gets corrupted after I resume from suspend. I've tried to solve this problem but can't find anything more than others suffering from the same dilemma. So I came to conclusion that the easiest way ist to restart cairo-dock. I now have made the working scripts to shut it off and to start it but now the trash applet and home -directory applet won't workIt says :warning : (/build/buildd/cairo-dock-plug-ins-2.2.0~4/shortcuts/src/applet-.c:cd_shortcuts_list_drives:306) and same for rest apps.I am exporting $HOME variable and I have made sure $HOME works so I don't understand. The problem seems to be cairo-dock can't be started with su -m USER -c "exec /home/USER/ohjelmointi/shell/cairo-dock-on.sh &"it just doesn't know how to load something for the applets. But otherwise the settings load fine
View 1 Replies
View Related
Aug 26, 2010
I've tried ubuntu, kubuntu, fedora and linux mint. all 64 bit versions. I've also tried to suspend through applications like acpitool. But nothing works. When I click on Suspend, the screen goes blank but the computer is still running. The wireless network adaptor gets disabled for a second and then comes back on. All I have to do is press a key and I get the unlock screen prompt. Basically, suspend works like 'Lock Screen'. I have a HP Pavillion laptop. Core 2 Duo @ 2 GHz and 4 GB RAM.
View 12 Replies
View Related
