I have Debian Jessie 8 installed on a Acer 5733 Laptop. After I closed the screen, it goes sleeping, and when I open it, aleatory, it freezes. I don't have graphical interface, and the tty are not accessible. Sometimes, I get access to the computer 10 seconds, and then freeze.I have to shutdown the computer...and lose my work I was doing.I thought it was a X-problem, but the tty don't work too, so it's not ? When I restart the computer, it shows Code: Select allclearing orphaned inode <some inode number.
I have a strange problem in my new debian 8.3 LXDE install. Every time I boot my laptop it goes in to sleep mode automatically after a min. It is a default install and I have not configured any power management options. How do I find out the reason for the automatic sleep and how can I rectify it?
I have installed debian stretch on this machine, but can't get wired ethernet running. Using Slitaz live disc, the wired connection works. Guess I am missing a package or two.
Slitaz system (2.6.37) info reports:
Code: Select alltg3: Broadcom Tigon3 ethernet driver ath5k : Support for 5xxx series of Atheros 802.11 wireless LAN cards ath: Shared library for Atheros wireless LAN cards mac80211: IEEE 802.11 subsystem cfg80211: wireless configuration support rfkill: RF switch support
My etc/network/interfaces file is: Code: Select all# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo iface lo inet loopback
I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.
I have installed Debian 8.1 with KDE desktop on Lenovo t431s with intel HD4000 graphics.
When using it with dual monitor configuration, I experience the problem when I put system to sleep (by closing the lid), then remove the external monitor cable (from miniDP port) and then try to wake system from sleep. The login screen freezes and I am unable to move the mouse or type in credentials. In case I had music player running I can hear the music after system wake , but it shutters while playing.
This does not happen on some other distributions, but the problem is that I very much like my current setup and I would like to fix this problem and keep it.
I do not know if this problem is due to KDE or KDM or it's Debian base.
I'm running Jessie 64bit, and after installing the latest image and fully updating it, I get screen freezes using gnome, most oftenly when i press the start button to access gnome app grid. System becomes unusable and I have to hard reset. Just in case, I installed linux firmware from nonfree repos, but the issue persists. I don't use any exotic hardware:
Code: Select all00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
[Code] ....
I'd say it's related to graphics, but I don't know how to get around it...
I am using a old laptop as a server now and its running great! I would like to disable sleep/hibernation when I close the lid (i would prefer the screen still shut off if possible) ...
This has to be done via command line because I don't use a gui ...
Note: I use debian testing.GUI very frequently completely breaks for me, it looks like this:URL....It usually happens after a short freeze or after going back to GUI from TTY (which doesn't display because of a known Nvidia proprietary driver issue).And sometimes my laptop goes into sleep state by itself while it's being used. This is lenovo ideapad z510 laptop, with intel+nvidia GPU (nvidia Optimus). To use nvidia GPU I use bumblebee.
Installed Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
i have the following problem which i couldnt solve in the past weeks. We have two Server with an onboard "Atheros AR8161 Gigabit Ethernet (rev 10)" and a quad "Realtek RTL8111/8168B" network adapter connected via PCIe. One of the servers is running Debian Wheezy with a custom 3.2.53Kernel (compiled from linus repository) and the second one runs Debian Jessie with stock kernel. Both are running XFCE4.
Each of the computers are connected to a local network (192.168.0.1 respectively .2) and to the intranet of our institute (10.20.0.81 respectively .82). After a random time they are not accessible via the intranet (ping doesnt work, ssh gives no route to host). However, i can still ping them over the local network. Also, at the moment i try to establish a ssh connection over the local network, the computer is again acessible via the intranet.
I already tried the boot options acpi=off and pcie_aspm=off without success. Additionally we switched from the onboard Atheros NIC to the Realtek, but everything stays the same. Therefore i don't believe that it is driver related.
For me it looks like that the NIC goes to an energy saving mode which is not handled correctly by our intranet. However, how can i avoid that the NIC goes to energy saving state? Is there a way to disable the D-states?
I'm using a laptop as a mini server, but I haven't figured out how to sleep the display. I am not using the gnome desktop - I shut the lid but the display stays on.
ps - I should note - this is Debian 5.0.3 PPC version running on a PowerBook G4
I have tried to use the extensions toggle-touchpad and touchpad-indicator that claim to be able to do this, but neither will load properly. They show up with a little exclamation-point-triangle in the "Tweaks" panel saying "Error loading extension". How to get Jessie gnome system succeeded in getting their touchpad disabled via a simpe toggle mechanism?
I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.
Don't know if it helps however when I tpye iwconfig I get: ladb:/home/nigel# iwconfig lo no wireless extensions. eth0 no wireless extensions.
My Acer Aspire 7552 laptop is running Debian Testing (just the main repos, no contrib or non-free). For some reason, it takes over five minutes to resume from suspend, and an absurd period to come back from hibernate (well over half an hour). Has anyone encountered this problem before, or have any tips on how to fix it? For the time being, I'm completely powering off every time I close my laptop because it's faster that way.
Output of lspci in case it helps: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
It seems like ifconfig used to show which DNS servers were being addressed, but something has changed, I need to know whether I am referencing what I think I am... I have search this forum, googled, and come up empty... did the metrics go away with 8.2? Was I dreaming at 7.5?
I installed Debian Jessie on my Hummingbaord. I use it with apache, owncloud and minidlna but after some days i rebooted the system and then i can't log in with SSH anymore.
The message I get:
Access denied Using keyboard-interactive authentication. Password:
And this again and again, although I enter the right password. If I login directly on the Hummingboard all works normally...
Acer Aspire S7-391 laptop, 64 bit install Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
It's for a Lenovo x140e laptop with Jessie. Specs online commonly describe the laptop as having BCM43142 but I ran "lspci -knn | grep -iA2 net" and the output says I have BCM43228. Not sure why there is that discrepancy but I am assuming the latter, BCM43228, is what is actually in my computer.
Anyway, I originally installed "broadcom-sta-common", "module-assistant", and "broadcom-sta-source", but that resulted in nothing happening so I think I am going to "apt-get purge" those and start over.
I know about the Debian wiki "wl" page but it only provides instructions up to Wheezy, not Jessie. And I read many previous threads but they often contain different instructions and mixed results, plus there are many moving parts here (kernel, OS, driver, packages) and the instructions seem to be changing over time.
Does the order of install for those above packages matter at all? Do I need the kernel header or not and, if so, how do I use it? Are there any other packages I need? What is the process?
I'm having some trouble hooking my external flatscreen monitor up to my Toshiba Tecra's docking station and having Mint (or Debian) be happy with it. The laptop uses a widescreen monitor but my external is a 4x3; I wonder if this is causing problems. Of course, it may just be the Intel 82801G graphics adapter.et things up properly in the Display Preferences config window (I'm using Gnome, btw) but when I hit apply, the system locks and I have to hard boot. I've never set up a linux box with multiple monitors before, let alone multiple monitors that require different resolutions.
I have a relative fresh install of jessie in which I face a high cpu usage of java (top shows about 165% CPU and 12% MEM). The problem occurs right after booting the computer. These values stay constantly high for days if I leave the box running. This happens even if the computer is just sitting there without doing anything.
I have to kill java to go back to normal. So, when I do a Code: Select allkillall -KILL java the problem goes away. After that it doesn't reappear and I can use all apps installed without a problem.
Currently I am based on openjdk Code: Select allupdate-alternatives --display java java - auto mode link currently points to /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java - priority 1071 slave java.1.gz: /usr/lib/jvm/java-7-openjdk-amd64/jre/man/man1/java.1.gz Current 'best' version is '/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java'.
But I have also tried the SUN version with the same result.
Where to look to find more information on what exactly java app is using so much resources and how I can solve it? I guess I could just put somewhere in rc.d a kill java command and forget about it but I would really like to find out whats going on...
When i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.
Configuring gpsd with Wheezy was a breeze. Just had to run "sudo dpkg-reconfigure gpsd", answer a few questions, and it worked like a charm. With Debian Jessie the following happens:
tsi@sxf-tsi:~$ sudo dpkg-reconfigure gpsd Warning: Stopping gpsd.service, but it can still be activated by: gpsd.socket Creating/updating gpsd user account... tsi@sxf-tsi:~$
How does one bring up the gpsd configuration dialog with Jessie?
I've after latest jessie update a problem with service samba restart. If I use "service samba restart", there is a timeout (after long time) and error.
Output of "systemctl status samba.service":
Code: Select all● samba.service - LSB: ensure Samba daemons are started (nmbd and smbd) Loaded: loaded (/etc/init.d/samba) Active: failed (Result: timeout) since Mo 2014-10-20 02:16:57 CEST; 7s ago Process: 6205 ExecStart=/etc/init.d/samba start (code=killed, signal=TERM)
Okt 20 02:16:57 server systemd[1]: samba.service start operation timed out. Terminating. Okt 20 02:16:57 server systemd[1]: Failed to start LSB: ensure Samba daemons are started (nmbd and smbd).
[Code] ....
Whats going wrong. "service samba restart" should bring no error message if the service is not running previously.
I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
After installing Jessie, apt-get gives me a huge list of packages with the suggestion to autoremove them. Now, I've tried auto-remove once and was left with a naked Gnome, so I was wondering if there's another way to find out which packages I should keep and which I can safely remove. Is it safe to delete packages that cannot be found using the search function for the stable release? I checked them one by one here URL....How about linux images that won't appear in the above search?
Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.
how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.
A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.I tried to do it manually in a format that worked on debian 7..Manual mount fails too.
umount My passport fdisk -l (to see device name) mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4 dmesg | tail [ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found [ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through
