Debian Configuration :: Postfix Multi-instance Doesn't Work
Jun 21, 2015
i created a second instance of postfix.It isn' t the first time that i made this procedure but with debian i had a lot of problem.I think that the problem is chroot configuration of postfix .In the first i had two problem smtp “fatal: unknown service: smtp/tcp” and the second instance was enable to make nslookup of domain.I copied the necessary file in /var/spool/postfix-second-instace and i solved the errors.Now the problem is that there aren't error in log file but connect to xxx.xxx.net[yyy.nn.yyy.yyy]:25: Connection timed out for all connection. and the email are all in defer directory and the second instance doesn' t send emails.
View 4 Replies
ADVERTISEMENT
Jun 8, 2010
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
View 1 Replies
View Related
Sep 10, 2011
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies
View Related
Nov 20, 2015
So, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
View 3 Replies
View Related
Feb 14, 2011
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
View 9 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
Mar 27, 2016
Debian configurating, so I try to use wifi adapter, but it doesn't work. I have installed Debian Jessie from netinst CD. To reach perfect speed no options were selected. After I installed xfce4 and xfce4-goodies.I follow some different instructions and no dice. Wicd show me no avalable wifi connections. used Ubuntu 14, Ubuntu 12, etc. and I didn't have any problems with wi-fi connections. Some outputs of comands...
Code: Select allsatyva@meliorD:~$ cat /etc/debian_version
8.3
Code: Select allsatyva@meliorD:~$ lspci | grep 4313
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
[code]....
View 4 Replies
View Related
Sep 28, 2010
I have Debian Squeeze x64 on ThinkPad T61p with standard 2.6.32-5-amd64 kernel. thinkpad_acpi loaded as module, suspend to RAM works fine from menu in KDE as well as by closing the lid, however machine doesn't appear to react on pressing Fn+F4 which should put it to sleep as well. I've read through thinkpad_acpi documentation and asked Google but so far can't find the solution. Can anyone, point me in correct direction?
View 6 Replies
View Related
May 2, 2011
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa
[code]....
View 3 Replies
View Related
Dec 15, 2010
I recieve the following error:
Cannot find swap device, try swapon -a
/bin/echo: write error: No such device
If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3
It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.
View 11 Replies
View Related
Jan 20, 2011
I have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.
A few details:
- I'm using debian unstable,
- latest NetworkManager 0.8.2-3 from experimental
- latest modemmanager 0.4+git$foo from testing
- latest usb_modeswitch[_data] from experimental
[Code]....
View 1 Replies
View Related
Mar 2, 2011
how to fix the detection of ps2 mouse under Debian Squeeze? It is the optical mouse with wheel, red light shines, but mouse doesn't work.
View 14 Replies
View Related
Jun 29, 2011
I recently upgrade my grub to grub2 and had problem to boot debian. After trying to fix it myself, I played around with grub-image-ntldr, my debian now works ok, but I cant boot my XP anymore.
Now when I try to boot XP, I got "No grldr" message. If I copy my ntldr and rename it to grldr, my XP will boot ok. So it seems that when I try to boot XP it doesn't chainload ntldr anymore, it is looking for grldr.
I tried to change "chainload +1" to "chainload /ntldr", it complains about invalid signature. Does anyone knows why my grub now using grldr instead of ntldr?
View 2 Replies
View Related
May 13, 2010
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies
View Related
Nov 27, 2010
I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:
[Code]....
Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.
View 2 Replies
View Related
May 15, 2010
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies
View Related
Apr 23, 2016
I have currently configured Postfix as an SMTP server. I would preferably not use a domain name in my email address, like so: myname@[1.2.3.4]
I'm currently testing to see how other mail servers handle this kind of address. When I sent a mail with one one of my gmail accounts, I see that the mail gets rejected due to bad syntax.
It seems as though Google is giving me a RCPT TO address like so: myname@1.2.3.4 However, the postfix server rejects this address with the following error:
501 5.1.3 Bad recipient address syntax
To my best knowledge the only way to have an IP address inside an email address with to write it as a domain literal [1.2.3.4].
My question: how to configure postfix to accept myname@1.2.3.4 as well?
I have put both [1.2.3.4] and 1.2.3.4 in "mydestination" and 1.2.3.4 in "virtual_alias_domains".
It doesn't seem to work so far though.
View 1 Replies
View Related
Jun 20, 2011
My Postfix cannot currently create any folders other than inbox. Even when I send an e-mail I receive an error along the lines of, "Could not create sendmail folder." Also, my Postfix isn't receiving e-mails, and can only send e-mails to other accounts on the server. I called my ISP and they told me my port 25 isn't blocked, and it is forwarded on my router so I am not sure what could be wrong. I am using zoneedit as my name server and I am pretty sure my MX record is good.
View 14 Replies
View Related
Mar 26, 2016
I wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.
set imgdevpath="/dev/disk/by-label/multiboot"
Code: Select allmenuentry 'Debian Jessie amd64' {
set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
loopback loop $isofile
linux (loop)/install.amd/vmlinuz
initrd (loop)/install.amd/initrd.gz
}
This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.
View 14 Replies
View Related
Mar 22, 2016
The problem I have is so simple yet difficult for me to resolve. My Postfix MTA allow fake mails from me@example.com to me@example.com. How can I block them?
For example, if I do "telnet smtp.mail.yahoo.it 25", as I write the MAIL FROM command I get the alert "Authentication required". How can I achieve that?
View 13 Replies
View Related
Mar 24, 2011
I did search the forum but didn't find an answer.
I have setup Postfix + Dovecot on my basic debian 5 server. If I send a message to a localuser@mydomain.com from mutt, it delivers just fine and is visible when viewed through squirrelmail, I can also send just fine.
My issue is that irrespective of what options I set in main.cf, I cannot for the life of me get Postfix to stop erroring with "Recipient address rejected: User unknown in virtual alias table". I'm stumped.
My main.cf is as follows code...
I do not want to setup virtual hosting with MySQL or similar, I literally want to receive mail in local users mailboxes for a single domain. Any ideas on what's missing?
View 1 Replies
View Related
Jul 20, 2011
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
View 1 Replies
View Related
Feb 15, 2011
I'm doing some tests and playing around with postfix in a test squeeze server. What I want to achieve is a postfix mail server using ports 465 and 587 with smtp authentication to send mails. I followed this howto: [URL].. and I'm using a php script with pear functions to test sending emails to a gmail test account of mine. This is the script:
<?php
require_once "Mail.php";
$from = "Webmaster <webmaster@server>";
$to = "My Name <myaccount@gmail.com>";
$subject = "This is sent with pear as a test";
$body = "This is the body of the message";
[Code]...
View 2 Replies
View Related
Mar 21, 2011
Anyone successfully using VNC client on a Mac to control a Debian server?I have the vncserver setup on the Debian machine properly. But I'm having problems connecting to it from both a PowerMac running Tiger and a MacBookPro running leopard.I can connect no problem from a machine running Slack12.2, have not setup port forwarding on my router to connect remotely yet.My Debian machine is running the latest stable release of squeeze with KDE4.I originally tried this with RealVNC Enterprise for OSX but I'm not gonna buy it so I need another alternative after the 30 day trial ends as they have no free version for OSX.
The situation is that I do freelance graphic design on the PowerMac with Cinema4D and Photoshop so I spend most of my time on that machine which is located in my home studio in my attic. Aside from the MacBook and a Dell desktop(family machine)all my other machines and network hardware are in the basement. So to go from the attic to the basement everytime I need to do something on another machine is not practical, and the only other machine I need to access on a regular basis is the Debian box in the basement, this makes the most sense.
I also have a 14 year old living in the house and he's fascinated by all this and will meddle in anything he gets the chance to so all the Linux machines and network hardware need to be behind lock and key.
View 6 Replies
View Related
Mar 24, 2010
I installed apache on my local machine to test websites. I have one problem: I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.) Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/site1/public_html
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
[Code]...
View 1 Replies
View Related
Dec 5, 2010
I can see that in yum-updatesd configuration i can use smtp_server to rely mail notifications as per below outputs from man pages smtp_server SMTP server to use when sending mail, host or a hostort string. Defaults to localhost:25. The problem that this option doesn't work at all and it rely into the local MTA not the one set on the smtp_server
View 2 Replies
View Related
Mar 24, 2010
I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:
Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost
[code]....
View 4 Replies
View Related
Feb 15, 2010
I have KDE 4.4 and Firefox 3.6. Whenever I click a link from a plasmoid widget, it tries to open Konqueror and another instance of Firefox. The page actually loads in the opened Firefox window, but the task bar shows an instance of Konqueror and another instance of Firefox, that keeps loading for a while then close. See image below:
I currently have setup the browser default application as "firefox". If I set this option to use the default application, it opens in Konqueror and I don't see additional windows in the task bar. If I change the option to "firefox %u", then it exhibit the same issue, but the process is much faster, so the loading windows don't stay for long in the task bar. Additionally, it opens the link on a new Firefox window and opens the page twice. Although Konqueror is not loaded, the bouncing icon next to the mouse pointer shows up and stay for a while.
View 1 Replies
View Related
Jul 2, 2009
I installed CentOS 5.3 without major problems, and customized the installation to my heart's content, but I still do not have flash plugin active when I first open firefox. I have to close the first firefox window and from the second instance of firefox, the flash plugin works without any problem.
Here is my setup:
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.10) Gecko/2009042718 CentOS/3.0.10-1.el5.centos Firefox/3.0.10
Kernel: 2.6.18-128.1.10.el5.centos.plus, x86_64.
View 9 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
