Debian Configuration :: Nm-applet Doesn't Start After (Testing)
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
ADVERTISEMENT
Mar 10, 2011
I'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?
View 4 Replies
View Related
Dec 28, 2009
Anyone out there running Debian testing/squeeze?
Is Java running in your browsers properly? I just want to make sure I'm not alone. I'm sure a recent update caused the problem. A future update will probably fix it.
Java applets have stopped working on my main desktop and laptop. The server running stable/lenny works fine. Fedora and Ubuntu installed on the laptop also work fine.
Java applications such as JAlbum work without any problems.
Only Java applets in the browsers fail. Iceweasel, Epiphany, and Opera all fail.
It fails on my internal site.
I get the same error at Test Your Java Version And How do I test whether Java is working
But this one works.
View 11 Replies
View Related
Jun 18, 2015
Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
● mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
View 4 Replies
View Related
Dec 6, 2010
I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
View 1 Replies
View Related
Oct 21, 2010
I get the following on startup:
(==) Log file: "/var/log/Xorg.0.log", Time: xx
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
[Code].....
My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.
View 14 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
Sep 4, 2010
i'm tryin to get a GPS dongale to work with debian testing on start up gpsd starts under nobody, (ps -C gpsd -fww) so i pkill it. i want it to start under my login so i try gpsd -N -n -D 2 /dev/ttyUSB0 this gives bash: gpsd: command not found if i tey (gpsd -N -n -D 2 /dev/ttyUSB0) in a root terminal or with sudo it launches,
[Code]....
i'm following a method i used on ubuntu to get this working so i think that launching gpsd under my username is the key
View 1 Replies
View Related
Apr 12, 2010
I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
View 5 Replies
View Related
Nov 8, 2015
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
View 2 Replies
View Related
Feb 26, 2010
I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.
I installed only proftpd-basic and it's default dependencies. Should be enough right?
My configuration files are as follows:
I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].
My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.
View 1 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Feb 17, 2011
I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.
Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.
View 1 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Jun 6, 2011
After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.
View 9 Replies
View Related
Aug 2, 2010
I've successfully installed Debian testing (squeeze) on my old iMac G3. I didn't select a desktop environment as a preconfigured package, but only left "standard system utilities" checked.Once I rebooted, I logged in as root (on the command line) and ran "apt-get install xfce4 xfce4-goodies gnome-icon-theme xdm", let all that pull in and installd then rebooted. As the system was booting, I could see all the services starting and whatnot, but when it gets to the line "Starting xdm..." the screen changes to black, but stays black for a good 2 minutes. I tried hitting some keys on the keyboard, as well as typingy login credentials, even though I can't see them, but nothing seems to work. I've tried rebooting several times
View 6 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
May 25, 2010
I've installed the latest testing version, which has 2.6.32 kernel perfect for me. I was very amazed when check system monitor and saw it runs with 90MB RAM, meanwhile my ubuntu desktop takes only 400, and the pocket version of ubuntu on vmware has 180MB RAM.
The questions is: Debian runs on vmware 7. Could the amount of RAM change when switching to a normal environment? Or I have to test and see what is happening..What problems could occur when using a testing version?
View 8 Replies
View Related
Oct 3, 2010
but I have been literally banging my head against the wall.I am trying to configure skype on my system (testing, x86) but unsuccessfully.Let me say that I am now using skype (static) as downloaded from skype website.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
[code]....
View 3 Replies
View Related
Dec 22, 2010
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies
View Related
Jul 5, 2011
AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
View 5 Replies
View Related
Aug 12, 2015
I just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
2560 2608 2640 2720 hborder 0
1440 1443 1448 1481 vborder 0
+hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
View 7 Replies
View Related
Jul 1, 2011
I just updated my Debian testing as usual (apt-get update && apt-get dist-upgrade), and it totally screwed up Nvidia drivers. I had to revert to integrated graphic card to start Xorg.
After that, I noticed that libgl1-nvidia-glx is missing, and when I tried to install it back, it produces the following:
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-nvidia-glx : Depends: libgl1-nvidia-alternatives but it is not going to be installed
E: Broken packages
Any ideas what's going on with it?
View 14 Replies
View Related
May 23, 2010
I am not sure why, but my wireless networking icon on the top right of the panel doesn't show up any more during startup. Previously during startup, the applet would show up and then after a while connected to my wireless network seamlessly.
The only thing I did before and after it stopped working was to enable auto login. I cannot disable auto-login through the GUI and according to postinings in the forums no one knows how to do it through the command line interface.
In the 'Startup Applications' menu it is checked for startup with the command line saying "nm-applet --sm-disable". What can I do to have the network manager icon automatically startup when I turn on Ubuntu? Right now I get it to work by typing "sudo nm-applet" in the terminal window and then pasting my wireless encryption key.
View 9 Replies
View Related
Mar 28, 2011
I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
View 5 Replies
View Related
Jun 3, 2010
I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.
I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times
View 1 Replies
View Related
Jan 5, 2011
I m trying to use static ip address on debian. I followed a tutorial and I modified the /etc/networking/interfaces but every time I reboot I can't do anything because the nm-applet says that I have select a manually connection..
View 1 Replies
View Related
Jul 20, 2011
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
View 1 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Jun 29, 2015
have intalled Debian 8 on bi quad cores opteron, also Tomcat 8 and openjdk7 are installed, i have do a mistake about version eclipse because i have installed eclipse Kepler or the lasted version of eclipse is Luna, after douwload Luna, i have deleted eclipse kepler who was installed in /opt directory, i do the command "tar" for luna version, no problems for instaling, but eclipse luna doesn't work.I try many version of luna like 32bits and 64 bits, but nothing to do the IDE doesn't start.
Code: Select allroot@dct-skyned:/opt/eclipse# ls
about_files configuration eclipse.ini icon.xpm plugins
about.html dropins epl-v10.html notice.html readme
artifacts.xml eclipse features p2
root@dct-skyned:/opt/eclipse# ./eclipse
bash: ./eclipse: Aucun fichier ou dossier de ce type
root@dct-skyned:/opt/eclipse#
View 9 Replies
View Related
