I bought a laptop : Samsung R580 and when i want to install Debian Squeeze with NetInstall, it's impossible because ma Ethernet Card isn't recognized.These are the caracteristics of my card :PCI ID : 11ab4381Supporté : YesFabricant : Marvell Technology Group Ltd.Matériel : 88E8059 PCI-E Gigabit Ethernet ControllerPilote : sky2The driver is not in the kernel 2.6.32 and i must to wait a new kernel version in Debian?
View 8 RepliesAfter to install Debian Sid, i can't to connect to my network. When i launch lsmod, ath9k is present so the module is enabled.I don't use network-manager-gnome, wicd and other, i modify myself /etc/network/interface. But even with this configuration, the wifi does not works.
View 3 Replies View RelatedI tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
View 5 Replies View Relatedmy internet connections works via my eth0 adapter. For Windows user this may be fine, but I actually would like to know what makes it connect. My /etc/network/interfaces shows:
[code]...
No eth0 mentioned here. dhcp3/dhclient.conf consists only of commented-out lines, so no eth0 here either. In /etc/init.d I see there is this networking daemon. When I do
[code]...
that magically enhanced eth0 works even if you want to shut it down. No wonder I don't get my wlan0 working, my PC doesn't seem to care about anything I am configuring here.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
Delivery via docevot lda works for the virtual users.
Sending a mail that should be redirected to a folder instead of going to the INBOX does not work
Code: Select allecho "lala" | mail -s beispiel julius@myvirtualdomain
#/home/vmail/julius@myvirtualdomain/.dovecot.sieve
Code: Select all
require "fileinto";
if header :contains "subject" ["beispiel"] {
fileinto "beispielordner";
} else {
# The rest goes into INBOX
# default is "implicit keep", we do it explicitly here
keep;
}
I can see no errors in dovecot.log, -info.log, -debug.log but also no sieve messages
Code:
Select all
#/etc/dovecot/conf.d/15-lda.conf
protocol lda {
postmaster_address = julius@localhost
mail_plugins = $mail_plugins sieve
[Code] .....
I ping my router. If I keep my mouse moving (or i'm typing) I get a 5ms ping.If I stop typing/moving my mouse, it times out.
- I disabled NetworkManager for the inteface eth0 but it doesn't solve the problem.
- I'm having the same problem using a Ubuntu 15.01 bootable image
- I'm having the same problem usign an Ethernet PCI Adapter
- I'm having the same problem usign a Wifi PCI Adapter
lsb_release -da
Code: Select allDistributor ID: Debian
Description: Debian GNU/Linux testing (stretch)
Release: testing
Codename: stretch
[code]....
I am using debian squeeze. I haven't changed much and I am a newb at this sorry. I can use the SFTP, but I can't use the FTP under any account. I can't find a conf file or anything for this.
View 8 Replies View RelatedAt first I thought the card was broken, but it connects to networks fine. I know its kind of minor, but is there a way to enable the little traffic indicator lights on the card?
View 1 Replies View RelatedI just put a pfSense firewall inbetween my ADSL router and my LAN. It's configured to have a cachng DNS server and a DHCP server. Among other things. For reasons beyond this post the address range served by DHCP changed from 10.0.0.x to 192.168.1.x. The new DHCP server gives 192.168.1.1 as gateway and DNS server name and not the public IP addresses of our internet provider.
After reconnecting our client machines everything worked just fine on the win-xp boxes, but the Debian Squeeze servers and Ubuntu 10.4 clients all started to get network timeouts. If I ping public websites it works but browsing to the same servers fails. Other services like POP3 and IMAP also fails. All machines use WiFi to connect and the access point is the same as before.
What could it be that make the debian boxes fail? My laptop runs squeeze too and also fails. But when connecting to various other access points at hotels and such I do not get this problem.
Another weird thing is that the debian server running virtualbox cannot do things online but the virtual windows boxes running on this machine can. Weird! Where should I start looking? How is networking/dhcp clients on Debian different from Windows XP?
There is something strange going on with Pidgin in Debian 6. I have just installed the system, then Pidgin, then configured my MSN accounts and chatted; but after rebooting, it no longer works. It just hangs while trying to connect - this is what I see from strace:
[Code].....
- a largish number of times. My very rough and ready thoughts about this so far are that it is probably not Pidgin that has an error, since 1) It worked initially, and 2) I am pretty sure the developers would have know about it very quickly if this was a general problem in Pidgin. On the other hand, my networking seems otherwise to be fine - s what is going on here?
I have browser-plugin-gnash installed and I am using Debian Squeeze. In Chromium, I get the message "You need to upgrade your Adobe Flash Player to watch this video." whereas it works in Iceweasel.
View 1 Replies View RelatedI have a very strange problem.ometimes, yes sometimes not all the time, I get a Destination Host Unreachable when I ping a computer on my network. If I switch to root using su I can ping that same computer. Here is a screen shot:
joseph@laptop:~$ ping 192.168.1.14
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
From 192.168.1.9 icmp_seq=2 Destination Host Unreachable
[code]...
I have a debian-powered NAS (Buffalo LinkStation) and I want to configure the following behaviour: When ethernet (eth0) is plugged in, connect and get a static ip address (ie. 192.168.0.11) When a wireless usb-adapter (wlan0) is plugged in, connect to a wireless router (ie. "Ankkanet") get another static ip address (192.168.0.12)
My /etc/network/interfaces :
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
[code]....
what could be causing wireless to disconnect when ethernet cable is unplugged?
I am runnig Jessie with the default GNOME. Every thing has been perfectly smooth, but for the audio line in. First you should now the same hardware was working well with Wheezy. Then the hardware card is RealTek ALC887-VD and I am using the analogic part (both for in and out lines).
Below I will write some command results, but first, it seems important to describe the problem. I can hear the audio line in. If I blow in a mic, I definitelly hear the sound of it in the output. With alsamixer I can toggle the line in level and it works fine. By the way, with pavucontrol, it is the same I have access to the line in. but when I look in the Gnome setting for the sound, input, no card is available, then no volume setting is available.
--> as a result, I can't record the sound from the mic. it is sent directly to the output without been taken into account in the system. So no comment on video making, no skype …
On the web, the problem is always "no sound with this card" "No sound after upgrade to Jessie"… but Card is working fine but no seen on a upper level…
Code: Select allroot@Desktop:~# lsmod |grep snd
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63142 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45118 1
snd_hda_intel 26327 12
[Code].....
I have been using my system for couple of weeks, and normally update software when the icon is displayed on top bar (gnome). Last couple of days there were updates for X, and I am not sure whether that is the cause of my problem. Once bootup, I get the login screen. When enter the password the login screen keep coming back. there is no error about any password issue, or anything. It keeps prompt me to enter the password.
I could login back the following way.
1. ctrl + alt + F1 , and login with the same username/pwd as for X
2.change to root
3.pkill gdm3
4.exit from root to user privilege
5. startx
The system starts X correctly and no login screen is displayed. I could use the system as usual.
The only thing I did custom to my system was upgrading to the latest kernel (2.6.38) using the source. This was to get support for my hardware, but that was about a month ago. I do not see anything in /var/log (X, demesg etc).
I'm not sure of what is going on here, I might be missing something obvious, but anyway my fresh netinstall of Testing doesn't boot without the USB stick that I installed from plugged in. When USB plugged in it boots without problems.
root@dellserver:/boot/grub# fdisk -l
Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0009486a .....
Every single theme has at least one or more broken UI element. In Arc, I'm missing highlighting in the context menu, and in Numix, some application's backgrounds are just completely black. All of these themes don't give me a urlbar. I'm also missing a lot of boxes. There is no box around the word "submit" in reddit, and neither around "cancel". If you go into the search bar, I'm missing the checkbox for "limit my search to /r/...". I know these themes work, because I had them working in my last install of Debian. Except, last time I used the XFCE iso instead of the netinst. Even default themes, like Raleigh, are not working correctly. I installed all the necessary packages like the gtk2 murrine engine, but if the default themes aren't working then something is definitely missing.
View 0 Replies View RelatedI would really like to try and do a Netinstall on my laptop with it. I know I could just download the CD's/a DVD, but I would rather customize it for my laptop, and I've heard that's the fastest way. The problem is that I have to compile the drivers for both my wireless and my wired internet. I have guides to compile both the wireless [URL] and wired [URL] internet. I was wondering if there was a way to compile these drivers in a Netinstall (preferably the wireless, but wired if necessary)?
View 5 Replies View RelatedI am trying to install Squeeze on a HP mini netbook. I have been trying to make a USB to netinstall Squeeze and cannot get it right. I cannot get past the message
SYSLINUX 4.02 debian-2010.............. on booting.
I have tried to make the netinstall usb from this
[URL] dInstaller
I am also trying to understand this
[URL]
I have also tried using Unetbootin. Nothing works so far. Some simple steps to make a workable USB.
if debian lenny is installed using a netinstall cd would it contain a desktop environment if no internet connection is available at installation?
View 2 Replies View RelatedI have internet connection - you need to open a browser & in the login screen enter your user name & password to get connected. The connection is via a ethernet cable. I have the netinstall cd for debian testing. How to connect to internet & get debian testing installed.
View 6 Replies View RelatedWhen I netinstall debian squeeze an asus netbook using using Unetbootin usb stick, at the end I am asked if I want to install grub on MBR. I agree, yes, but on booting I find that the netbook has not grub. I go back to usb stick that stole my grub and I use it to boot. I go to sunaptic and install grub, still nothing, the netbook won't boot without the usb stick.
View 2 Replies View RelatedI'm hoping to install XFCE 4.8 after a fresh install of Debian via the netinstall. Do I just change the source.list file to point to testing and then install xfce4?
View 9 Replies View RelatedI figured I'd rather do a netinstall for Debian, but it cannot find my network card. This has been the issue for Ubuntu as well. I did find this, but I haven't installed Debian yet: [URL] .... Not to mention it's 5 years old, and the links are obviously dead. I'm somewhat inexperienced with Linux in general, and I've searched for incorporating driver modules into the install but couldn't figure it out.
Where can I find the driver, and how can I incorporate it into the install? I wanted to do the netinstall to have Debian as minimal as possible.
I installed Squeeze on a server today, and struggled a bit because the network card needed non-free firmware (Broadcom something). The server had no floppy, so I had to go and get a pen drive and put firmware from non-free on it to get it to work.
I agree on the political issues on this, but sometimes it's non-free or nothing.
So I was wondering if someone know of a patched netinstall, or know how to make one? Then I could give the pen drive away to something more useful that keeping non-free firmware. Warnings and questions about the non-free would also be nice.
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies View RelatedI downloaded and installed the debian 8 ppc netinstall on my powerbook G4. upon the option of which desktop environment I wanted, I de-selected debian desktop environment (I only selected printer and utilities.) After finishing the install I am prompted with terminal. I logged in and did the following:
Code: Select allnano /etc/apt/sources.list
to include
Code: Select alldeb http://ftp.us.debian.org/debian jessie main contrib non-free
deb-src http://ftp.us.debian.org/debian jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
then did
Code: Select allsudo apt-get update
sudo apt-get upgrade
then
Code: Select allsudo apt-get install xfce4 xfce4-goodies
then
Code: Select allsudo apt-get install lightdm
and finally
Code: Select allsudo apt-get install synaptic apt-xapian-index gdebi gksu menu
sudo reboot
after reboot the login screen pops up. I log in, and a terminal pops up over the login screen. I think the issue is startx is not working?
i have the following problem which i couldnt solve in the past weeks. We have two Server with an onboard "Atheros AR8161 Gigabit Ethernet (rev 10)" and a quad "Realtek RTL8111/8168B" network adapter connected via PCIe. One of the servers is running Debian Wheezy with a custom 3.2.53Kernel (compiled from linus repository) and the second one runs Debian Jessie with stock kernel. Both are running XFCE4.
Each of the computers are connected to a local network (192.168.0.1 respectively .2) and to the intranet of our institute (10.20.0.81 respectively .82). After a random time they are not accessible via the intranet (ping doesnt work, ssh gives no route to host). However, i can still ping them over the local network. Also, at the moment i try to establish a ssh connection over the local network, the computer is again acessible via the intranet.
I already tried the boot options acpi=off and pcie_aspm=off without success. Additionally we switched from the onboard Atheros NIC to the Realtek, but everything stays the same. Therefore i don't believe that it is driver related.
For me it looks like that the NIC goes to an energy saving mode which is not handled correctly by our intranet. However, how can i avoid that the NIC goes to energy saving state? Is there a way to disable the D-states?
I have installed Squeeze on my laptop, an Acer 5315.The fans never turn on, and the laptop eventually overheats and shuts off.This is not a hardware problem, because Lenny, on another partition, works fine.I have poked around, and discovered that the temperature sensor, as reported by "acpi -V", and in /sys/devices/virtual/thermal, does not get updated. It seems to get read at boot, but the reading never changes, no matter how hot the machine gets.
Specifically, if the machine is cool, acpi reports 40 degrees C, and goes on reporting the same number until the machine overheats and shuts down.On the other hand, if the machine is hot (because it's been running without the fan), and I reboot, then the reading at boot is usually either 75 or 85, and the fan turns on during boot, and stays on, at high speed, until the next reboot, and the reading never changes during the whole time