CentOS 5 :: Load A Driver Into Modprobe?

Feb 22, 2009

How do I properly load/install

alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)

View 19 Replies


ADVERTISEMENT

CentOS 5 Hardware :: Can't Load NIC Driver?

Oct 6, 2010

I am starting a new line of business for my company, selling IP PBX's, based on Asterisk.I am using the Elastix build, which is based on CentOS 5.5.I just purchased a Shuttle XS35-701,which is an Atom powered box, which draws 40W of power. It looks like it is going to make a great Asterisk appliance. My only problem is that CentOS doesn't recognize my network card.It is a JMicron JME260.JMicron has a "driver" on its web site. There are two versions for Linux: 1.0.5,available as a tar archive,and 1.0.6, in a rar archive. I have downloaded both a tried to install both. I get the same errors on either one.The instructions say to expand the archive, and to change to the proper directory. Then is says to "make install" I have done this multiple times. I get a series of errors:

make[1]]: Entering directory 'usr/src/kernels/2.6.18-194.3.1.el5-x86_64'
CC [m] /root/jme-1.0.6/jme.o
In file included from /root/jme-1.0.6/jme.c:41:[code]....

After I run this, there is no jme.ko. I have no idea why not. I don't know what to do about it. Has anyone installed this JME260 NIC? I just put another NIC in the machine. It is built onto the motherboard, and has no slots to put another one into.

View 19 Replies View Related

OpenSUSE Network :: Modprobe Not Able To Remove Driver / Get Rid Of It?

Oct 21, 2010

I'm using openSUSE 11.3 and i access internet through usb-stick.

Before inserting my usb-stick, i generally remove the usb-storage module driver by this command:

modprobe -r usb-storage

But after this command, i get an output saying that usb-storage is built in and cannot be removed.

Can anybody help me how to remove that module. It works well under ubuntu and Mandriva.

View 9 Replies View Related

Software :: Using Modprobe To Install A Driver Module?

Jun 21, 2011

I may be missing a last crucial step while trying to use modprobe to install a module and make it active.The system is Debian (Mint LMDE flavor).The module is for a Realtek wlan driver. Since it appears to be available in the kernel, I chose to try and use it instead of getting into a work-around using ndiswrapper.Here is how I found it..

Code:

# modprobe -l | grep r81
kernel/drivers/net/r8169.ko

[code]...

View 1 Replies View Related

CentOS 5 :: Installation - Select Device Driver To Load

Oct 12, 2009

When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.

View 8 Replies View Related

CentOS 5 Networking :: R8168 Driver Fails To Load

Sep 25, 2010

I have a:

# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:

r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready

I have verified the cable and it's good the windows machine next door is fine using it without packet loss.

The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).

View 1 Replies View Related

CentOS 5 Networking :: Modprobe Doesn't Seem To Be Able To Find Any Rt25x00 Module

Apr 9, 2009

Since my Asus WL-3300 seems to be having trouble, I bought a USB adapter -- a Linksys WUSB54G ver 4. Version 4 was apparently important because it came with a Ralink 2570 chip -- and that's supposed to work with Linux (which is why I chose it).I think it will work because, without loading any drivers, Net Manager can see the local routers (about seven of them). But when I choose mine, though it asks for a WEP key, it never connects. I'm not sure now what driver is loading that *almost* works with it. But I think I may still need to load the driver from: URl...But when you read the page it says that the driver has entered the "Mainline Kernel" -- and I'm wondering if that is why the adaptor almost works.So the questions:

1) Without a driver, should this Ralink 2570 be working at all?

2) How do I find what driver *is* loading?

3) Modprobe doesn't seem to be able to find any rt25x00 module, is this right -- or is there some other name I should be looking for?

iwlink scan, ifconfig, etc., all see the adapter as wlan0.lsusb shows the adapter.I'm going to keep searching, but wrote this in case there is something really simple that I'm overlooking.

View 1 Replies View Related

CentOS 5 :: No Support For /proc/modules - No Such File Or Directory /sbin/modprobe -l?

May 19, 2009

i'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory

View 4 Replies View Related

Ubuntu Installation :: Boot Error "modprobe: FATAL Could Not Load /lib/modules 2.6.35-22 Generic Modules No Such File Or Directory"

Apr 14, 2011

Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.

When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.

View 9 Replies View Related

Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?

Apr 15, 2010

This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?

[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$

View 14 Replies View Related

CentOS 5 Hardware :: Driver For Ich8 Serial Ata Storage Controller 2820 Driver

Feb 17, 2010

I am attempting to load CentOS 5 on an Acer 6900 desktop and I'm not even getting out of the starting gate. I am familiar with using linux but not the install procedure which is why I am beginning to dive into this. However, when I bring the system up off the Linux boot disk and go to install it's not even giving me the option of the controller so I can begin installing the os from the dvd-rom. This is what acer lists as the controller for the 6900: ich8 serial ata storage controller 2820 linux driver. I cannot find this driver for linux anywhere.

View 10 Replies View Related

CentOS 5 Hardware :: Intel Graphics Driver Driver Upgrading 5.4 To 5.5 I386?

May 16, 2010

i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....

and i solved the black screen problem changing the driver for i810

Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection

View 2 Replies View Related

Red Hat :: How To Load Driver In Kickstart

Jan 14, 2011

I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?

View 3 Replies View Related

Red Hat :: Load Driver For NIC In RHEL?

Mar 30, 2011

How can i load the driver for NIC in RHEL

View 2 Replies View Related

CentOS 5 :: Create A Boot Load Entry For Mandriva From Grub Centos?

Feb 22, 2011

Ive installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?

View 1 Replies View Related

CentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module

Feb 20, 2010

I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.

Using these instructions....

[url]

When I make the WLAN driver, I get this:

View 2 Replies View Related

Fedora Hardware :: Cannot Load KDE Because Of ATI Driver ?

Mar 22, 2011

I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.

Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)

I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.

How can I get KDE back and running, using either the proprietary or the open-source driver?

View 2 Replies View Related

Ubuntu :: How To Load The Correct USB Driver

May 28, 2010

I have a USB TV tuner ( USB ID 15a4:1001) which Ubuntu (KARMIC) insists is a HID device..

Quote:

Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1

[Code]....

View 4 Replies View Related

Ubuntu Installation :: How To Get The Driver To Load

Jun 17, 2010

Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that

Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8

[code]...

how do i get the driver to load.

View 9 Replies View Related

Ubuntu :: Nvidia Driver Won't Load On 10.4?

Aug 14, 2010

im trying to get compiz to work but i cant even get nvidia graphics to load ive tried everything this is for a m11x alienware computer running ubuntu 64 bit drivers are installed but wont work

View 2 Replies View Related

Ubuntu :: Won't Load After New Driver Download?

Aug 29, 2010

i'm using lucid lynx. it is a dual boot machine, vista and lucid lynx. i have switchable graphics (at least it is available in windows), intel and ati. ubuntu was working fine but then a pop up showed up asking if i want to install ati drivers. the pop up "said" that drivers were proprietary yet tested on linux systems. i decided to install them. i was asked to reboot after installation which i did. now every time i select ubuntu in the grub the system loads but then it suddenly stops and i get a blank screen.

View 3 Replies View Related

Ubuntu Networking :: Load Driver Lan In 10.10?

Feb 16, 2011

how to load the onboard lan driver?

View 2 Replies View Related

Fedora :: Can't Load Printer Driver Into 12 Box

Mar 21, 2010

I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:

This generates a "Linux Printer Package Setup" pop-up screen.

The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.

View 2 Replies View Related

Debian Configuration :: How To Load Driver Automatically

Sep 21, 2015

I have PCI-device and driver for it - tmk1553b.ko

The problem is to make this device work i have to open terminal after system starts and write

Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1

But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.

Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686

View 5 Replies View Related

Fedora Installation :: Device Driver To Load ?

Jan 22, 2009

I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,

I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?

View 8 Replies View Related

Ubuntu :: Cannot Use Ndiswrapper To Load 32 Bit Wusb11v4 Driver?

Jan 16, 2010

The problem: I am a poor man who until today was running WinXP on AMD64 using an old usb wireless wusb11v4 adapter (32 bit drivers). I have recently installed the Ubuntu 9.10 AMD64 release. But I cannot use ndiswrapper to load my 32 bit wusb11v4 driver because of the 64 bit os vs the 32 bit driver. I can hardly buy a new wireless adapter. But I do not see an AMD32 bit release.

View 3 Replies View Related

Ubuntu :: Load A Compiled Driver On Boot?

May 8, 2010

I wanted to know if there is any way of adding a driver that i compiled during boot apart from adding it in

Code:
/lib/modules/<kernel version>/kernel/drivers

It works fine till i update to a newer kernel...then i have to add it in the new kernel file....so is there a permanent method?

View 3 Replies View Related

Debian :: Cannot Get Kernal Module To Load The Driver For My NIC

Aug 17, 2010

I am installed Debian 5.0.5 with kernel 2.6.x.

I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller

Kernel modules: e1000e

I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.

So, under lsmod I see e1000e loaded:

View 9 Replies View Related

Hardware :: SiS 771/671display Ubuntu 10.04 Does Not Load Driver

Oct 4, 2010

I am having a problem with this diabolical piece of kit on a laptop with Ubuntu 10.04. It never did work very well (max 800x600) was as good as it got.

It is now not working at all except in safe mode.

Th drivers appear to be there but not loaded.

So I downloaded a driver and tried to install it (sorry about the Portuguese but it is fairly easy to work out that it is a conflict with xserver-xorg-video-5):

There appear to be proprietary drivers written by a SiS employee but they are not distributed except to manufacturers[url]

Where do I go from here? I really would like better than 800X600, 3D would be a very nice bonus.

View 1 Replies View Related

Fedora Installation :: Select Device Driver To Load ?

Apr 10, 2009

I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved