Ubuntu Networking :: Load Driver Lan In 10.10?
Feb 16, 2011how to load the onboard lan driver?
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Cannot Load Edimax Wireless Driver
Aug 3, 2011I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder
View 5 Replies View RelatedUbuntu Networking :: Remove The Default Driver Rt2800pci And Load The New One?
Sep 7, 2010My wifi card is DWA-525 I found the drivers and compiled them using make and make install How do I remove the default driver rt2800pci and load the new one?
View 9 Replies View RelatedUbuntu Networking :: Loadndisdriver: Load_driver(358): Couldn't Load Driver Netr7364?
Jun 24, 2010I'm trying to use ndiswrapper to use a windows driver (netr7364) on ubuntu for my ralink wireless adapter.owever, it fails to load, giving this message in syslog after starting it with "sudo modprobe ndiswrapper":
Code:
Jun 24 17:58:47 roosh-desktop kernel: [ 921.765989] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
Jun 24 17:58:47 roosh-desktop kernel: [ 921.910039] usb 1-7: reset high speed USB device using ehci_hcd and
[code]....
Ubuntu Networking :: Compiled Driver For WUSB600N But It Won't Load On Start-up Or On Inserting
Jan 4, 2011I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -
[Code]....
CentOS 5 Networking :: R8168 Driver Fails To Load
Sep 25, 2010I have a:
# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
I have verified the cable and it's good the windows machine next door is fine using it without packet loss.
The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).
Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?
Apr 15, 2010This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Ubuntu :: How To Load The Correct USB Driver
May 28, 2010I have a USB TV tuner ( USB ID 15a4:1001) which Ubuntu (KARMIC) insists is a HID device..
Quote:
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
[Code]....
Ubuntu Installation :: How To Get The Driver To Load
Jun 17, 2010Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that
Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8
[code]...
how do i get the driver to load.
Ubuntu :: Nvidia Driver Won't Load On 10.4?
Aug 14, 2010im trying to get compiz to work but i cant even get nvidia graphics to load ive tried everything this is for a m11x alienware computer running ubuntu 64 bit drivers are installed but wont work
View 2 Replies View RelatedUbuntu :: Won't Load After New Driver Download?
Aug 29, 2010i'm using lucid lynx. it is a dual boot machine, vista and lucid lynx. i have switchable graphics (at least it is available in windows), intel and ati. ubuntu was working fine but then a pop up showed up asking if i want to install ati drivers. the pop up "said" that drivers were proprietary yet tested on linux systems. i decided to install them. i was asked to reboot after installation which i did. now every time i select ubuntu in the grub the system loads but then it suddenly stops and i get a blank screen.
View 3 Replies View RelatedUbuntu :: Cannot Use Ndiswrapper To Load 32 Bit Wusb11v4 Driver?
Jan 16, 2010The problem: I am a poor man who until today was running WinXP on AMD64 using an old usb wireless wusb11v4 adapter (32 bit drivers). I have recently installed the Ubuntu 9.10 AMD64 release. But I cannot use ndiswrapper to load my 32 bit wusb11v4 driver because of the 64 bit os vs the 32 bit driver. I can hardly buy a new wireless adapter. But I do not see an AMD32 bit release.
View 3 Replies View RelatedUbuntu :: Load A Compiled Driver On Boot?
May 8, 2010I wanted to know if there is any way of adding a driver that i compiled during boot apart from adding it in
Code:
/lib/modules/<kernel version>/kernel/drivers
It works fine till i update to a newer kernel...then i have to add it in the new kernel file....so is there a permanent method?
Hardware :: SiS 771/671display Ubuntu 10.04 Does Not Load Driver
Oct 4, 2010I am having a problem with this diabolical piece of kit on a laptop with Ubuntu 10.04. It never did work very well (max 800x600) was as good as it got.
It is now not working at all except in safe mode.
Th drivers appear to be there but not loaded.
So I downloaded a driver and tried to install it (sorry about the Portuguese but it is fairly easy to work out that it is a conflict with xserver-xorg-video-5):
There appear to be proprietary drivers written by a SiS employee but they are not distributed except to manufacturers[url]
Where do I go from here? I really would like better than 800X600, 3D would be a very nice bonus.
Red Hat :: How To Load Driver In Kickstart
Jan 14, 2011I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?
View 3 Replies View RelatedRed Hat :: Load Driver For NIC In RHEL?
Mar 30, 2011How can i load the driver for NIC in RHEL
View 2 Replies View RelatedUbuntu Multimedia :: Can't Load GLX Using Ati Driver On Radeon 7200
Oct 30, 2010I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
Ubuntu Installation :: FGLRX Driver Will Not Load Graphics
Mar 28, 2011I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies View RelatedUbuntu Installation :: 11.04 - X Will Not Load With NVidia Current Driver
May 1, 2011After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
Fedora Hardware :: Cannot Load KDE Because Of ATI Driver ?
Mar 22, 2011I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.
Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)
I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.
How can I get KDE back and running, using either the proprietary or the open-source driver?
Fedora :: Can't Load Printer Driver Into 12 Box
Mar 21, 2010I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
CentOS 5 :: Load A Driver Into Modprobe?
Feb 22, 2009How do I properly load/install
alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)
CentOS 5 Hardware :: Can't Load NIC Driver?
Oct 6, 2010I am starting a new line of business for my company, selling IP PBX's, based on Asterisk.I am using the Elastix build, which is based on CentOS 5.5.I just purchased a Shuttle XS35-701,which is an Atom powered box, which draws 40W of power. It looks like it is going to make a great Asterisk appliance. My only problem is that CentOS doesn't recognize my network card.It is a JMicron JME260.JMicron has a "driver" on its web site. There are two versions for Linux: 1.0.5,available as a tar archive,and 1.0.6, in a rar archive. I have downloaded both a tried to install both. I get the same errors on either one.The instructions say to expand the archive, and to change to the proper directory. Then is says to "make install" I have done this multiple times. I get a series of errors:
make[1]]: Entering directory 'usr/src/kernels/2.6.18-194.3.1.el5-x86_64'
CC [m] /root/jme-1.0.6/jme.o
In file included from /root/jme-1.0.6/jme.c:41:[code]....
After I run this, there is no jme.ko. I have no idea why not. I don't know what to do about it. Has anyone installed this JME260 NIC? I just put another NIC in the machine. It is built onto the motherboard, and has no slots to put another one into.
Ubuntu / Apple :: Cannot Get Wireless Driver To Load At Boot Time
Mar 14, 2010I followed the instructions that came with the 802 .11 Linux STA driver and was able to initialize my card and connect to a protected network! The instructions also tell me how to load the drivers at boot time, but I get an error when I try to run
Code:
# sh: for i in `find /lib /var -name wl.ko`; do mv $i ${i}.orig; done
The message returned is
Code:
bash: syntax error near unexpected token `do'
Upon restarting, my wireless is no longer active. My card is Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
Ubuntu Installation :: Unable To Load The Driver For Matrox M9148?
Oct 18, 2010I recently upgraded to 10.10 from 10.04 on my x86_64 system. The upgrade went fine except it cannot load the driver for my Matrox M9148. ("m9x")I simply get a "Cannot load driver" error. (there is more to it, will paste when I finish work)Basically the driver is there and in place, it loads it but cannot use it.When I go to reinstall the driver again manually, it dies with an error only supports Xorg up to 7.5So, now I see this is an Xorg and driver compat issue.I have reported it to Matrox and am awaiting a reply.
In the mean time though, since I need my machine working, is there anyway around the issue, or could I even roll back xorg to whatever it was in 10.04 to get the drivers working again?
Ubuntu Multimedia :: Nvidia Driver Fails To Load In Kernels 2.6.32-23 And Later
Dec 6, 2010I've been using kubuntu for a while, and I've been having this issue since the release of the 2.6.32-23 kernel. Originally, I thought it was related to my raid array and this bug: [URL] I'm still not convinced they're not related, but there is also apparently the possiblity of an nvidia driver issue. Previously, I rebooted infrequently, and I had a spare hard drive installed, so my grub menu would always appear (as it detected an alternate OS on this drive) and it was trivial to select the 2.6.32-22 kernel. Since I installed all updates, including the -35 kernel, it ran update-grub and now I have to press shift when I reboot. Specs/Summary:
Kubuntu 10.04
amd64.
nvidia driver 195.36.24
RAID 1 (linux software raid)
kernels installed: 2.6.32-21 - 2.6.32.25
when I boot with -22 or earlier, everything works great. when I boot with -23 or later, I get the kubuntu splash screen, followed by it switching to tty2, then I get it switched back to where the X screen should be, with the system log displayed, and then it switches back to tty2. After installing -35, I panicked a bit as I'd never had the grub screen not show (not knowing about the shift key), and so I poked around logs and it showed nvidia driver errors. I tried removing my xorg.conf file and rebooted, and I got the desktop to show again. I prefer the nvidia driver as I sometimes use dual monitors.
Ubuntu Multimedia :: Installing Nvidia Mx200 Driver - X Will Not Load ?
Dec 31, 2010I am trying to setup a computer with xubuntu 10.10 for my dad. It is mostly working, but flash animations/games run somewhat poorly. I think I might be able to fix this by using the non-free nvidia drivers, but I cannot seem to get them installed.
Sysinfo reports that the video card is an nvidia geforce mx200, so I downloaded the nvidia 96 driver package from the repositories, ran the configuration program, & rebooted. As you may guess, x did not load.
I have been working on this intermittently for a few weeks, & I do not remember everything I might have tried to fix it, but here is what I am sure of:
Sysinfo reports that the video card is an nvidia geforce mx200
when i try "sudo modprobe nvidia," I get the message "FATAL: Module nvidia not found." "sudo modprobe nvidia-96" gives no such error.
When I check the Xorg.0.log, I find:
The nouveau driver does not seem to work either, but if I remove the xorg.conf file, x works okay. How to get Flashplayer running more smoothly.
Debian Configuration :: How To Load Driver Automatically
Sep 21, 2015I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
Fedora Installation :: Device Driver To Load ?
Jan 22, 2009I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?