CentOS 5 Networking :: R8168 Driver Fails To Load

Sep 25, 2010

I have a:

# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:

r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready

I have verified the cable and it's good the windows machine next door is fine using it without packet loss.

The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).

View 1 Replies


ADVERTISEMENT

CentOS 5 Networking :: Install The Latest Kmod-r8168 Rpm - It Failed To Enable The Networking Support

Dec 30, 2010

I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:

# yum --enablerepo=elrepo install kmod-r8168

The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).

First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):

# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up

Once I do this, I have network connectivity.

View 3 Replies View Related

Ubuntu Multimedia :: Nvidia Driver Fails To Load In Kernels 2.6.32-23 And Later

Dec 6, 2010

I've been using kubuntu for a while, and I've been having this issue since the release of the 2.6.32-23 kernel. Originally, I thought it was related to my raid array and this bug: [URL] I'm still not convinced they're not related, but there is also apparently the possiblity of an nvidia driver issue. Previously, I rebooted infrequently, and I had a spare hard drive installed, so my grub menu would always appear (as it detected an alternate OS on this drive) and it was trivial to select the 2.6.32-22 kernel. Since I installed all updates, including the -35 kernel, it ran update-grub and now I have to press shift when I reboot. Specs/Summary:

Kubuntu 10.04
amd64.
nvidia driver 195.36.24
RAID 1 (linux software raid)
kernels installed: 2.6.32-21 - 2.6.32.25

when I boot with -22 or earlier, everything works great. when I boot with -23 or later, I get the kubuntu splash screen, followed by it switching to tty2, then I get it switched back to where the X screen should be, with the system log displayed, and then it switches back to tty2. After installing -35, I panicked a bit as I'd never had the grub screen not show (not knowing about the shift key), and so I poked around logs and it showed nvidia driver errors. I tried removing my xorg.conf file and rebooted, and I got the desktop to show again. I prefer the nvidia driver as I sometimes use dual monitors.

View 7 Replies View Related

Hardware :: Nvidia Driver Causes Traceback And Fails To Load On Boot

May 11, 2010

Every time I boot, I get the following when the Nvidia driver tries to load.

Here is the Backtrace

Memory map:

View 4 Replies View Related

CentOS 5 :: Network 10Mb/s Half Duplex Only. R8168 ?

May 24, 2011

For some reason my network card started going 10Mb/s half duplex instead of 1000Mb/s full duplex. System is connected to 8x1Gb HP switch.Other devices connect fine through the switch and get full 1Gb network.I have Centos 5 with all updates. Driver comes from elrepo and as well is updated.

[root@host ~]# modinfo r8168
filename: /lib/modules/2.6.18-238.9.1.el5/weak-updates/r8168/r8168.ko
version: 8.023.00-NAPI[code].....

View 2 Replies View Related

Ubuntu :: Maverick Fails To Load Grahical Display After NV Driver Deactivated / Solve It?

Nov 11, 2010

I am able to login to the system. code...

Are there any logs that you would like me to post?

I have tried reinstalling the NV display driver via "additional drivers" in the live CD, but they do not appear to be being retained on the HD version of Ubuntu. When I go back into the live cd the driver is not installed.

How can I switch the proprietary driver back on in the hard disk when I am running the live disk.

Is there a repair system program?

If not is there a way of forcing an upgrade on an upgraded system so that missing files are reinstalled?

If that does not work what should I do next to get the GDM to load?

View 1 Replies View Related

CentOS 5 Hardware :: NVIDIA 180.xx Fails To Load

Apr 2, 2009

I've just installed the NVIDIA 180 drivers on my Centos 5.2 installation via:

yum install nvidia-graphics

However, when I try and start X via startx it bombs out. The Xorg.0.log says:

(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor

[Code]....

what I need to do. I have a VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1).

View 8 Replies View Related

Ubuntu Networking :: Realtek R8168 Keeps Going Link Up And Down?

Jun 29, 2011

After compiling the Realtek drivers from their page (ver 8.024), installing the module, blacklisting r8169 and updating the initramfs, I still can't get the network card working.The card is listed in lshw as RTL8111/8168B PCI Express Gigabit Ethernet controller.lsmod shows only r8168.dmesg keeps spitting once and again, every second or so the following:

Code:
[ 1293.452274] r8168: eth0: link up
[ 1294.449785] r8168: eth0: link down

[code]....

View 5 Replies View Related

CentOS 5 :: Load A Driver Into Modprobe?

Feb 22, 2009

How do I properly load/install

alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)

View 19 Replies View Related

CentOS 5 Hardware :: Can't Load NIC Driver?

Oct 6, 2010

I am starting a new line of business for my company, selling IP PBX's, based on Asterisk.I am using the Elastix build, which is based on CentOS 5.5.I just purchased a Shuttle XS35-701,which is an Atom powered box, which draws 40W of power. It looks like it is going to make a great Asterisk appliance. My only problem is that CentOS doesn't recognize my network card.It is a JMicron JME260.JMicron has a "driver" on its web site. There are two versions for Linux: 1.0.5,available as a tar archive,and 1.0.6, in a rar archive. I have downloaded both a tried to install both. I get the same errors on either one.The instructions say to expand the archive, and to change to the proper directory. Then is says to "make install" I have done this multiple times. I get a series of errors:

make[1]]: Entering directory 'usr/src/kernels/2.6.18-194.3.1.el5-x86_64'
CC [m] /root/jme-1.0.6/jme.o
In file included from /root/jme-1.0.6/jme.c:41:[code]....

After I run this, there is no jme.ko. I have no idea why not. I don't know what to do about it. Has anyone installed this JME260 NIC? I just put another NIC in the machine. It is built onto the motherboard, and has no slots to put another one into.

View 19 Replies View Related

Ubuntu :: X Fails To Load With Nvidia Driver: "screen(s) Found But None Have A Usable Config"

May 8, 2010

My system is a Lenovo B500 All-In-One, with an Nvidia GTS 250M video card. nv seems to work okay, but I cannot get the desktop to load with the nvidia driver (nvidia-current, from the repository). I've been hacking away at this for a week and a half with no results. Every time I try to boot with the nvidia driver, the splash screen comes up for a second, the screen flashes a couple times between a "static" screen and tty2, then the screen seems to go to a test mode, where it flashes a series of solid colors indefinitely. Looking at /var/log/Xorg.0.log, I see the following:

Code:

(II) May 08 19:06:53 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) May 08 19:06:53 NVIDIA(0): enabled.
(WW) May 08 19:06:54 NVIDIA(0): Failed to enable display hotplug notification

[code]....

View 9 Replies View Related

CentOS 5 :: Installation - Select Device Driver To Load

Oct 12, 2009

When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.

View 8 Replies View Related

Ubuntu Networking :: Unable To Use Both R8168 And R8169 Realtek Nic Drivers / Make It Possible?

Oct 7, 2010

How is it possible to use both r8168 and r8168 nic drivers
I have both cards on motherboard (one pci and another pcie).

when installing one driver instruction suggest to remove another...

this is what I have found, without solution

View 2 Replies View Related

Ubuntu Networking :: Headless Server Fails To Load GUI Without Attached Monitor

Jul 25, 2010

I am running a server that is mostly headless, but does run the Gnome environment (I have ubuntu-desktop installed). I usually administer it via VNC over SSH. My problem is that when I reboot the system over SSH, the system fails to fully load the GUI, which prevents me from connecting via VNC (although SSH still works).

When I connected a monitor and rebooted, the system booted up fine. It appears that the GUI will not load without an attached monitor, which never happened before in previous Ubuntu versions. I do use many commands but prefer a GUI for certain tasks and visualization of my work since my system has the resources to spare. Running Lucid Lynx

View 6 Replies View Related

Ubuntu Networking :: Load Driver Lan In 10.10?

Feb 16, 2011

how to load the onboard lan driver?

View 2 Replies View Related

CentOS 5 Networking :: Fails At Determining IP Information For Eth0 (onboard NIC Asus P6T On Centos 5.3)?

Apr 28, 2009

I'm running a fresh install on an intel i7 system on an asus p6t deluxe v2 motherboard with the onboard NIC (Marvell Technology pci-e). I know the NIC is working as when I boot into the onboard OS that Asus provides (Asus Express Gate SSD)I have a working net connection.Booting up CentOS hangs at determining IP information for eth0 and eventually fails with the following error:PING xxx.170.30.1 from xxx.170.31.231 eth0: 56(84) bytes of data---xxx.170.30.1 ping statistics ---4 packets transmitted, o received, +3 errors, 100% packet loss, time 2999ms, pipe 3 failed.

RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.

[code]....

View 14 Replies View Related

CentOS 5 Networking :: Macbook Pro 5,5 - Late 2008 - Wireless - Download The Broadcom Driver And Create A Driver Module

Feb 20, 2010

I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.

Using these instructions....

[url]

When I make the WLAN driver, I get this:

View 2 Replies View Related

Ubuntu Networking :: Cannot Load Edimax Wireless Driver

Aug 3, 2011

I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder

View 5 Replies View Related

Ubuntu Networking :: Rtl8185B Driver Fails To Start Successfully

Sep 14, 2010

I just bought a new TrendNet TEW-423PI for my ubuntu box (10.04) and have not been able to get it to start. This has the RealTek RTL-8185. I first tried starting up out with the stock install with the built in r8180 drivers. No luck. The board is seen (visible in lshw -C network), but the network device (eth1, or wlan0) never gets created. I googled and got the suggestion that I should install the RealTek r8185 drivers. I did that. I still have the same problem. Looks like something is going wrong in the drivers. Here's what I see in lshw:

Code:
*-network:1 UNCLAIMED
description: Ethernet controller
product: RTL-8185 IEEE 802.11 a/b/g Wireless LAN controller
...
physical id: 9
bus info: pci@0000:00:09.0
version: 20
width: 32 bits
clock: 33MHz
capabilities: pm cap_list
configuration: latency=32 maxlatency=64 mingnt=32
resources: ioport:d000(size=256) memory: 1c020000-1c0203ff
and in dmesg I see

Code:
Linux kernel driver for RTL8180 RTL8185 based WLAN cards
Copyright (c) 2004-3005 Andrea Merello
...
rtl8185B: WW:MAC chip not recognized: version 7. Assuming RTL8180
...
rtl8185B: No channels, aborting
rtl8185B: Initialization failed

View 1 Replies View Related

Ubuntu Networking :: Remove The Default Driver Rt2800pci And Load The New One?

Sep 7, 2010

My wifi card is DWA-525 I found the drivers and compiled them using make and make install How do I remove the default driver rt2800pci and load the new one?

View 9 Replies View Related

Ubuntu Networking :: Can't Get Wireless Connectivity Because The STA Driver For Bcm4312 Fails To Activate

Nov 13, 2010

I have just upgraded to 10.04 and can't get wireless connectivity because the STA driver for bcm4312 fails to activate. Does this sound familiar to anyone? I had had similar problems in 9.10 and tried to install bcmwl-kernel-source which apparently caused errors in the upgrade process. Not sure if this is part of the problem.

View 5 Replies View Related

Ubuntu Networking :: Loadndisdriver: Load_driver(358): Couldn't Load Driver Netr7364?

Jun 24, 2010

I'm trying to use ndiswrapper to use a windows driver (netr7364) on ubuntu for my ralink wireless adapter.owever, it fails to load, giving this message in syslog after starting it with "sudo modprobe ndiswrapper":

Code:
Jun 24 17:58:47 roosh-desktop kernel: [ 921.765989] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
Jun 24 17:58:47 roosh-desktop kernel: [ 921.910039] usb 1-7: reset high speed USB device using ehci_hcd and

[code]....

View 3 Replies View Related

Ubuntu Networking :: Compiled Driver For WUSB600N But It Won't Load On Start-up Or On Inserting

Jan 4, 2011

I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -

[Code]....

View 6 Replies View Related

Fedora :: 10 Internet - Websites Load Fails And Shows "Page Load Error"

Dec 10, 2009

I reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.

I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.

View 2 Replies View Related

Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?

Apr 15, 2010

This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?

[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$

View 14 Replies View Related

CentOS 5 Networking :: SCP Fails To Transfer Files?

Apr 11, 2009

I have two CentOS 5 servers that I'm trying to transfer files between. They're on the same LAN switch, same subnet and everything. So far, everything I've attempted has failed, but scp still exits with a return code of 0. It only displays a line of *** and exits immediately. It's almost as if the file transfers instantly, but no file actually gets copied. Here is the verbose output from scp:

scp -v kickstart.tar ****@192.168.xxx.xxx:/home/****
Executing: program /usr/bin/ssh host 192.168.xxx.xxx, user ****, command scp -v -t /home/****
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008

[code]....

View 4 Replies View Related

CentOS 5 Networking :: DNS Lookup Fails On Using Terminal

Oct 12, 2010

I have a CentOS 5.5 desktop at work. I can browse the web (we are behind a proxy of course), I can use Yumex perfectly. In a word, every GUI has DNS working correctly. But, as soon as I use a terminal, either within a X session (xterm, konsole...) or in a tty, any DNS lookup will fail. So for instance, yum does not work as it complains about not being able to find the servers, wget doesn' t work... And if I try a nslookup, I get a NX Domain Fail. I feel like the servers are not doing recursion research when using command line nslookups, even if I "force" the option (adding it even if it is the default). Of course, resolv.conf is OK, host.conf as well...

View 8 Replies View Related

CentOS 5 Networking :: Can't Load Ipip.o And New_tunnel.o?

Sep 28, 2009

i am trying to configure advanced routing on my centos 5. i have try to load ipip.o and new_tunnel.o by menuconfig on kernel option and add tunneling and the two modules. the issue occured when i type make to reconpile the kernel , i receive the message below.

[root@mblpbx01 2.6.18-8.el5-i686]# make
scripts/kconfig/conf -s arch/i386/Kconfig
CHK include/linux/version.h
CHK include/linux/utsrelease.h

[Code]...

View 3 Replies View Related

CentOS 5 Networking :: How To Enable Load Balancing In Box

Oct 27, 2010

I am using centos with two physical LAN cards. Some times one of our internet link goes down so the entire network stop. Now there are two different ISP internet lines coming into a single computer in their respactive lan cards for load balancing.
Kindly guide me that how can I enable Load Balancing in my Linux Box.

If one ISP goes down the load balancing server will use teh second one and vice virsa.

View 1 Replies View Related

CentOS 5 Networking :: Fails At Determining IP Information For Eth0?

Oct 7, 2009

I have been running into network issues lately with my CentOS 5 (installed on AMD Athlon X2 - 64 bit machine about 2 years ago). It was able to connect to the network fine until yesterday when I installed more memory into the machine restarted it.

Upon restart, the boot up was paused at 'Determining IP information for eth0' step for a while and booted with out connecting to the network. I tried restarting the network (/sbin/service network restart), but this is the error message I continuously get: Determining IP information for eth0...PING xxx.1.226.1 (xxx.1.226.1) from xxx.1.226.83 eth0: 56(84) bytes of data

[Code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved