Red Hat :: Load Driver For NIC In RHEL?
Mar 30, 2011How can i load the driver for NIC in RHEL
View 2 Replies
ADVERTISEMENT
Fedora :: Load A Print Driver And Network Driver For An MX860 Printer?
Apr 15, 2010This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
Server :: RHEL 4.4 - Load Average Raising Every 7-10 Days?
Nov 9, 2010I just wonder if anyone can give some hint regarding my problem. I have a server based on RHEL 4.4.What I have noticed is that server load average is raising in approx. 7-10 days by approx. 7, even if has very low CPU utilization, memory utilization on approx 80% and low on I/O stats.Linux apollo 2.6.9-67.ELsmp #1 SMP Wed Nov 7 13:58:04 EST 2007 i686 i686 i386 GNU/Linux
[Code]...
Server is used as compilator / build machine to build aplication from source code stored in IBM Rational clearcase envinronment, and as a test server to test those builds with network equipment. Does anyone can tell what could be causing this behaviour?
Server :: High-Availability HTTP Load Balancer With HAProxy & Heartbeat On RHEL 5.4
Oct 15, 2010I am trying to setup a High-Availability HTTP Load Balancer With HAProxy & Heartbeat using the below links.
I have all RHEL 5.4 servers hosted on VMWare.
[url]
[url]
This is the scenario, as given in the links as wells as my setup.
Load Balancer 1
Load Balancer 2
Web Server 1
Web Server 2
I have followed all the steps mentioned in the links religiously except the 2.2 here, in which it is asking to configure the vhosts. I could not really understand , what is to be placed in /etc/httpd/conf.d/vhosts.conf file and in which Web Server.
Due to this step only, I think I am failing in Failover test given in Point 4.1 here. I am able to open the webpage by [url] which gives the content of Web Server 1 (http1.example.com). But, when I try to shutdown the http service (to check failover), it does not shows the contents of Web Server 2 (http2.example.com)
Although, I am able to succeed in Failover Test 4.2, in which shared IP 192.168.0.120 switches when I try to start/stop the any of the Load Balancers.
General :: Adding A Driver To RHEL 6 Beta ISO?
May 4, 2010I am in attempt to add a pvscsi driver into RHEL 6 Beta OS. What I did is followed this:
1. Downloaded the complete ISO into /home/jack/RHEL folder
2. Follow these steps:
#cd isolinux/
boot.cat grub.conf isolinux.bin splash.jpg vesamenu.c32
boot.msg initrd.img isolinux.cfg tmp vmlinuz
call initro memtest TRANS.TBL
[Code].....
Red Hat / Fedora :: Unable To Install Ethernet Driver For Rhel 5
Sep 16, 2010i have rtl 8111/8168b gbe ethernet card. i hav downloaded its tar file from from gigabyte website.......kernel version is 2.6.18-8.el5
View 1 Replies View RelatedGeneral :: RHEL 6 Beta 2 - Don't Include Pvscsi Driver
Jun 2, 2010I tested with RHEL6 Beta and they don't include pvscsi driver we use for Vmware ESX.We did asked them to include this driver with new RHEL 6 Beta 1 but they din't. Now we expect it to be shipped with RHEL 6 Beta 2. How can I track the same beforehand. Is there any repository where can I track whether they have plan to ship it or not?
View 2 Replies View RelatedGeneral :: Realtek 8111 / 8168 LAN Driver Will Not Install On RHEL 5
Feb 15, 2011Realtek 8111 / 8168 LAN Driver will not install on RHEL 5
[root@localhost r8169-6.002.00]# make clean modules
make -C src/ clean
make[1]: Entering directory `/root/r8169-6.002.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers rset
make[1]: Leaving directory `/root/r8169-6.002.00/src'
make -C src/ modules
[Code]....
Server :: Qlogic Qla 1240 Scsi Card Driver Rhel 4 Or 5?
Jun 14, 2011Does anyone have knowledge of where I can get drivers for above card?
View 1 Replies View RelatedRed Hat :: How To Load Driver In Kickstart
Jan 14, 2011I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?
View 3 Replies View RelatedFedora Hardware :: Cannot Load KDE Because Of ATI Driver ?
Mar 22, 2011I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.
Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)
I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.
How can I get KDE back and running, using either the proprietary or the open-source driver?
Ubuntu :: How To Load The Correct USB Driver
May 28, 2010I have a USB TV tuner ( USB ID 15a4:1001) which Ubuntu (KARMIC) insists is a HID device..
Quote:
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
[Code]....
Ubuntu Installation :: How To Get The Driver To Load
Jun 17, 2010Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that
Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8
[code]...
how do i get the driver to load.
Ubuntu :: Nvidia Driver Won't Load On 10.4?
Aug 14, 2010im trying to get compiz to work but i cant even get nvidia graphics to load ive tried everything this is for a m11x alienware computer running ubuntu 64 bit drivers are installed but wont work
View 2 Replies View RelatedUbuntu :: Won't Load After New Driver Download?
Aug 29, 2010i'm using lucid lynx. it is a dual boot machine, vista and lucid lynx. i have switchable graphics (at least it is available in windows), intel and ati. ubuntu was working fine but then a pop up showed up asking if i want to install ati drivers. the pop up "said" that drivers were proprietary yet tested on linux systems. i decided to install them. i was asked to reboot after installation which i did. now every time i select ubuntu in the grub the system loads but then it suddenly stops and i get a blank screen.
View 3 Replies View RelatedUbuntu Networking :: Load Driver Lan In 10.10?
Feb 16, 2011how to load the onboard lan driver?
View 2 Replies View RelatedFedora :: Can't Load Printer Driver Into 12 Box
Mar 21, 2010I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
CentOS 5 :: Load A Driver Into Modprobe?
Feb 22, 2009How do I properly load/install
alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)
CentOS 5 Hardware :: Can't Load NIC Driver?
Oct 6, 2010I am starting a new line of business for my company, selling IP PBX's, based on Asterisk.I am using the Elastix build, which is based on CentOS 5.5.I just purchased a Shuttle XS35-701,which is an Atom powered box, which draws 40W of power. It looks like it is going to make a great Asterisk appliance. My only problem is that CentOS doesn't recognize my network card.It is a JMicron JME260.JMicron has a "driver" on its web site. There are two versions for Linux: 1.0.5,available as a tar archive,and 1.0.6, in a rar archive. I have downloaded both a tried to install both. I get the same errors on either one.The instructions say to expand the archive, and to change to the proper directory. Then is says to "make install" I have done this multiple times. I get a series of errors:
make[1]]: Entering directory 'usr/src/kernels/2.6.18-194.3.1.el5-x86_64'
CC [m] /root/jme-1.0.6/jme.o
In file included from /root/jme-1.0.6/jme.c:41:[code]....
After I run this, there is no jme.ko. I have no idea why not. I don't know what to do about it. Has anyone installed this JME260 NIC? I just put another NIC in the machine. It is built onto the motherboard, and has no slots to put another one into.
Debian Configuration :: How To Load Driver Automatically
Sep 21, 2015I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
Fedora Installation :: Device Driver To Load ?
Jan 22, 2009I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?
Ubuntu :: Cannot Use Ndiswrapper To Load 32 Bit Wusb11v4 Driver?
Jan 16, 2010The problem: I am a poor man who until today was running WinXP on AMD64 using an old usb wireless wusb11v4 adapter (32 bit drivers). I have recently installed the Ubuntu 9.10 AMD64 release. But I cannot use ndiswrapper to load my 32 bit wusb11v4 driver because of the 64 bit os vs the 32 bit driver. I can hardly buy a new wireless adapter. But I do not see an AMD32 bit release.
View 3 Replies View RelatedUbuntu :: Load A Compiled Driver On Boot?
May 8, 2010I wanted to know if there is any way of adding a driver that i compiled during boot apart from adding it in
Code:
/lib/modules/<kernel version>/kernel/drivers
It works fine till i update to a newer kernel...then i have to add it in the new kernel file....so is there a permanent method?
Debian :: Cannot Get Kernal Module To Load The Driver For My NIC
Aug 17, 2010I am installed Debian 5.0.5 with kernel 2.6.x.
I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Kernel modules: e1000e
I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.
So, under lsmod I see e1000e loaded:
Hardware :: SiS 771/671display Ubuntu 10.04 Does Not Load Driver
Oct 4, 2010I am having a problem with this diabolical piece of kit on a laptop with Ubuntu 10.04. It never did work very well (max 800x600) was as good as it got.
It is now not working at all except in safe mode.
Th drivers appear to be there but not loaded.
So I downloaded a driver and tried to install it (sorry about the Portuguese but it is fairly easy to work out that it is a conflict with xserver-xorg-video-5):
There appear to be proprietary drivers written by a SiS employee but they are not distributed except to manufacturers[url]
Where do I go from here? I really would like better than 800X600, 3D would be a very nice bonus.
Fedora Installation :: Select Device Driver To Load ?
Apr 10, 2009I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies View RelatedFedora Installation :: Load Driver Disk Without Anaconda?
Jul 7, 2010I known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
Ubuntu Multimedia :: Can't Load GLX Using Ati Driver On Radeon 7200
Oct 30, 2010I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
Ubuntu Installation :: FGLRX Driver Will Not Load Graphics
Mar 28, 2011I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies View RelatedUbuntu Installation :: 11.04 - X Will Not Load With NVidia Current Driver
May 1, 2011After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.