CentOS 5 :: No Support For /proc/modules - No Such File Or Directory /sbin/modprobe -l?
May 19, 2009
i'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies
ADVERTISEMENT
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
View 9 Replies
View Related
Jun 20, 2010
Is there a way to refresh the current configuration used by modprobe with an updated modules.conf file at the command line for Red Hat Linux 9.0?
View 1 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
Aug 2, 2010
I am using Debian Lenny as my server to host multiple databases.
Whenever, I used to add a new database, I used to add an IP address like eth0:test in the /etc/network/interfaces file.
Today when I tried to do the same, I got an error when I tried to start the interface by typing "#ifup eth0:test". I also tried to do in this way "#ifconfig eth0:test up" but both of then yielded the same error saying "/sbin/ifconfig: no such file or directory".
The path is valid and the files are also present there. There are ifup, ifdown, if and ifconfig files in the /sbin directory. I also checked the permissions which is root:root. But still I cannot find the problem.
View 9 Replies
View Related
Feb 1, 2010
I have a problem when booting my pc.I uninstaled bootchart and since then kernel goes to panic..saying /sbin/boot:no such file or directory..I followed the Repair Installed System from my dvd but it fails at the end and it just reboots the system..Is there any way to baypass this problem without reinstalling the OS?
View 9 Replies
View Related
Jun 4, 2010
I am trying to find the ip address on my Red Hat Linux box, but there is no ipconfig file in my /sbin/ directory. I did a 'locate ipconfig' in the terminal and the only files I got were plipconfig, sipconfig.py/c/o, plipconfig.8.gz, ipconfig.h. I dont know what happened to my ipconfig file. Where I can get a new copy of it?
View 4 Replies
View Related
Mar 16, 2010
I am using RedHat MRG on a standalone intel PC that has 8 cpus. It has 2 Quad cores. I am trying to force some specific persistent tuning on it so that the OS and IRQs are all on one CPU socket and then I can run my Application on the other CPU socket (4 CPUs) using the taskset command.
I have been reading up on this mainly at [url] and having some success. But, I have one IRQ that is not active until my application runs that I want to force it to be on CPU 4.
And so I believe I can do this by setting /proc/irq/default_smp_affinity to 10. But, I do not have such a file on my system. How can I create this file at boot time properly?
View 1 Replies
View Related
Jan 14, 2010
I am booting RH 5.4 over network (PXE) with custom initrd.img. I managed to get NFS working and switch root and do normal RH /sbin/init, but as RH boots it complains about /proc/devices missing:/proc/devices: fopen failed: No such file or directoryThe file is indeed missing, even though I'm doing "modprobe dm_mod" before. But still /proc/devices is not created. What am I doing wrong?init script for that initrd.img:
Code:
#!/bin/bash
export LD_LIBRARY_PATH=/lib:/usr/lib:/usr/kerberos/lib
[code]....
View 2 Replies
View Related
Jul 22, 2010
I'm trying to install a BCM4328 (rev 03) 14e4:4328 (rev 03) by using this page: [URL]... But when I get to this step: Step 3: All BCM43xx - Configure NDISWrapper (and WPA Supplicant) sudo ndiswrapper -i bcmwl5.inf I keep getting:
jeffrey@jeffrey-desktop:~/bcm43xx$ sudo ndiswrapper -i bcmwl5.inf
couldn't open bcmwl5.inf: No such file or directory at /usr/sbin/ndiswrapper-1.9 line 219. What am I doing wrong?
View 1 Replies
View Related
Feb 20, 2010
Im trying to setup pwm config on this computer so that the fans wont come on to loud. Motherboard is DFI lanparty JR p45-t2rs. there is pwm hardware, as i have used pwm config in arch on the same computer. any pointers you can give me to get pwm control working on this pc? edit: during sensors detect. im told that the it87 module is needed. but i cannot load it:
mark@torrentslave:~$ sudo modprobe it87
FATAL: Error inserting it87 (/lib/modules/2.6.31-17-server/kernel/drivers/hwmon/it87.ko): Device or resource busy
mark@torrentslave:~$
View 1 Replies
View Related
Oct 13, 2010
since the recent upgrade to Maverik every time I boot this error message appear on the top of the screen: "modprobe: Fatal: Could not load /lib/modules/2.6.35-22-generic/modules.dep: no such file or directory" fter that plymouth starts without any graphics and the first visible object is the login interface (GDM)
View 1 Replies
View Related
Jan 5, 2011
new user and have had a crash boot up and get the following: missing modules (cat/proc/madules;is/dev) Alert! /dev/disk/by-uuid/13bf007d-3bab-48et-b91a-babe68ab3223 does not exist
View 9 Replies
View Related
Feb 17, 2010
I'm attempting to install a WLAN card driver from source, as that's all that's available.I'm getting:
make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory
Build appears to be a link pointing to "/usr/src/linux-2.6.31.5-0.1-obj/x86_64/desktop"."linux-2.6.31.5-0.1-obj" doesn't exist.
View 4 Replies
View Related
Mar 22, 2011
I then went agead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
Check old driver and unload it.
Build the module and install
make: *** /lib/modules/2.6.32-71.el6.x86_64/build: No such file or directory. Stop.
[code]....
View 4 Replies
View Related
Oct 6, 2010
I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-2.6.31.5-0.1-desktop /lib/modules/2.6.31.5-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug 2.6.31.14-0.1-desktop 2.6.31.5-0.1-desktop2.6.31.14-0.1-default 2.6.31.14-0.1-xen
View 9 Replies
View Related
Mar 17, 2011
I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
View 3 Replies
View Related
May 9, 2010
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
May 4, 2010
When I enter "cat /proc/scsi/scsi" I'm returned with "cat: /proc/scsi/scsi: No such file or directory". I've tried this on two different installs on two different machines.
View 6 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
Jun 28, 2011
I've got a problem when I try to use to load modules like when I try : modprobe tun It says : FATAL: Could not load /lib/modules/2.6.32-4-pve/modules.dep: No such file or directory I've checked in my filesystem, the directory 2.6.32-4-pve doesn't exist, instead I have 2.6.39.2.110628 So how could I make modprobe look into the right directory ?
View 4 Replies
View Related
Nov 3, 2010
10.04 64 bit won't boot.
error message: enabling additional executable binary formats binfmt-support /usr/share/acpi-support/power-funcs: No such file or directory
View 1 Replies
View Related
Mar 29, 2010
My printer is HP F380 which is the same class as Deskjet 3650. I'm wondering is there an official website I can use to check if my printer is supported? Oh and how do I know which version am running? My kernel is 2.6.16-16
View 2 Replies
View Related
Sep 23, 2010
When I try to create a network tunnel, I get ioctl: no such device returned by the terminal. Which modules do I need to ad with insmod to enable tunneling?
View 2 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
Feb 22, 2009
How do I properly load/install
alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)
View 19 Replies
View Related
Nov 24, 2010
I have installed CentOS 5.5 x86-64 on my HP 6710b laptop and currently am in the middle of adjusting it to my needs (software/hardware development). As stated in the subject I can't add /sbin to $PATH. I have tried editing .bash_profile in my home directory and adding /sbin to PATH=$PATH:$HOME/bin, but it does not help. It's not a big problem, al though it would be much easier to use some commands (ifconfig for example) globaly.
View 3 Replies
View Related
Feb 14, 2011
I just installed CentOS 5 last night. Former Debian user.I was having problems with commands like ifconfig and visudo. So naturally I ran locate and noticed that they where in /usr/sbin. Then echo $PATH and noticed /usr/sbin was not there.Should I add it to my $PATH?
View 3 Replies
View Related
Jul 6, 2010
I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
View 7 Replies
View Related
