Red Hat :: How To Load Driver In Kickstart
Jan 14, 2011
I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?
View 3 Replies
ADVERTISEMENT
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
Nov 8, 2010
I m facing a problem from few days i try to sort it out but i fail to overcome from this problem .
i configure a pxe boot server and mount the RHEL iso to /bootins/tree directory
Then after i created a /kick/client.cfg kickstart file. and share both the directory /bootins/tree and /kick with nfs
below is the entry of my /etc/exports directory
/bootins/tree 192.168.10.0/24(rw,sync)
/kick 192.168.10.0/24(rw,sync)
my client machine can successfully boot from the server but after booting an error msg is come, the msg is unable to load a kickstart file , i dont know why this happens coz i can successfully mount both the above share from another linux machine but dont know why at booting time this msg is appears firewall is off
View 1 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Mar 30, 2011
How can i load the driver for NIC in RHEL
View 2 Replies
View Related
Mar 22, 2011
I am running Fedora 13 and KDE 4.5.5 (approximately). My video card is an ATI Radeon HD 5750. I have been having problems with the drivers for this card (as described here), having tried both the open-source driver and the proprietary ATI driver.
Recently I tried to install the new Catalyst 11.2 from ATI. In the process I broke something. Now when I boot, Fedora cannot load KDE. It reaches the screen with a progress bar at the bottom and "Fedora 13" in the lower right corner. The progress bar fills and becomes all white, then the system stalls. (I can boot into a command-line, though.)
I have had this problem once before. Last time I got it working again by following Fenrin's instructions in this thread. This time it does not work.
How can I get KDE back and running, using either the proprietary or the open-source driver?
View 2 Replies
View Related
May 28, 2010
I have a USB TV tuner ( USB ID 15a4:1001) which Ubuntu (KARMIC) insists is a HID device..
Quote:
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
[Code]....
View 4 Replies
View Related
Jun 17, 2010
Im using the drivers from netgear cd and they are installed into ndisgtk. log showing activity that
Jun 17 15:06:15 cablehanger kernel: [13644.100143] usb 1-4: USB disconnect, address 7
Jun 17 15:06:18 cablehanger kernel: [13647.592057] usb 1-4: new high speed USB device using ehci_hcd and address 8
[code]...
how do i get the driver to load.
View 9 Replies
View Related
Aug 14, 2010
im trying to get compiz to work but i cant even get nvidia graphics to load ive tried everything this is for a m11x alienware computer running ubuntu 64 bit drivers are installed but wont work
View 2 Replies
View Related
Aug 29, 2010
i'm using lucid lynx. it is a dual boot machine, vista and lucid lynx. i have switchable graphics (at least it is available in windows), intel and ati. ubuntu was working fine but then a pop up showed up asking if i want to install ati drivers. the pop up "said" that drivers were proprietary yet tested on linux systems. i decided to install them. i was asked to reboot after installation which i did. now every time i select ubuntu in the grub the system loads but then it suddenly stops and i get a blank screen.
View 3 Replies
View Related
Feb 16, 2011
how to load the onboard lan driver?
View 2 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Feb 22, 2009
How do I properly load/install
alias scsi_hostadapter2 ahci
into /etc/modprobe? (And /sys/module and /sys/bus/pci/drivers?)
View 19 Replies
View Related
Oct 6, 2010
I am starting a new line of business for my company, selling IP PBX's, based on Asterisk.I am using the Elastix build, which is based on CentOS 5.5.I just purchased a Shuttle XS35-701,which is an Atom powered box, which draws 40W of power. It looks like it is going to make a great Asterisk appliance. My only problem is that CentOS doesn't recognize my network card.It is a JMicron JME260.JMicron has a "driver" on its web site. There are two versions for Linux: 1.0.5,available as a tar archive,and 1.0.6, in a rar archive. I have downloaded both a tried to install both. I get the same errors on either one.The instructions say to expand the archive, and to change to the proper directory. Then is says to "make install" I have done this multiple times. I get a series of errors:
make[1]]: Entering directory 'usr/src/kernels/2.6.18-194.3.1.el5-x86_64'
CC [m] /root/jme-1.0.6/jme.o
In file included from /root/jme-1.0.6/jme.c:41:[code]....
After I run this, there is no jme.ko. I have no idea why not. I don't know what to do about it. Has anyone installed this JME260 NIC? I just put another NIC in the machine. It is built onto the motherboard, and has no slots to put another one into.
View 19 Replies
View Related
Sep 21, 2015
I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
View 5 Replies
View Related
Jan 22, 2009
I am totally new to Linux and have a PC here with 128 MB Ram and a 10 GB HDD. It has Windows Millenium installed but I presume this will be wiped during the install process if I so wish.,
I am part way through the install using CD's and have just chosen my required alnguage and then keyboard layout. The next option is asking me to choose what device drivers to load and most appear to be HDD Drivers. I haven't a clue what to choose here?
View 8 Replies
View Related
Jan 16, 2010
The problem: I am a poor man who until today was running WinXP on AMD64 using an old usb wireless wusb11v4 adapter (32 bit drivers). I have recently installed the Ubuntu 9.10 AMD64 release. But I cannot use ndiswrapper to load my 32 bit wusb11v4 driver because of the 64 bit os vs the 32 bit driver. I can hardly buy a new wireless adapter. But I do not see an AMD32 bit release.
View 3 Replies
View Related
May 8, 2010
I wanted to know if there is any way of adding a driver that i compiled during boot apart from adding it in
Code:
/lib/modules/<kernel version>/kernel/drivers
It works fine till i update to a newer kernel...then i have to add it in the new kernel file....so is there a permanent method?
View 3 Replies
View Related
Aug 17, 2010
I am installed Debian 5.0.5 with kernel 2.6.x.
I do a lspci and get: Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Kernel modules: e1000e
I know under this im supposed to see: Kernel driver in use: e1000e <- but this doesn't exist.
So, under lsmod I see e1000e loaded:
View 9 Replies
View Related
Oct 4, 2010
I am having a problem with this diabolical piece of kit on a laptop with Ubuntu 10.04. It never did work very well (max 800x600) was as good as it got.
It is now not working at all except in safe mode.
Th drivers appear to be there but not loaded.
So I downloaded a driver and tried to install it (sorry about the Portuguese but it is fairly easy to work out that it is a conflict with xserver-xorg-video-5):
There appear to be proprietary drivers written by a SiS employee but they are not distributed except to manufacturers[url]
Where do I go from here? I really would like better than 800X600, 3D would be a very nice bonus.
View 1 Replies
View Related
Apr 10, 2009
I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies
View Related
Jul 7, 2010
I known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
View 1 Replies
View Related
Oct 30, 2010
I know it's an old video card, but it worked just fine on Lucid after going through the following process:
HTML Code:
http://ubuntuforums.org/showthread.php?t=1578070
Unfortunately, after installing 10.10, I hadn't been able to enable desktop effects. I've been backwards and forwards through
HTML Code:
https://help.ubuntu.com/community/RadeonDriver
[Code].....
View 1 Replies
View Related
Mar 28, 2011
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies
View Related
May 1, 2011
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is:
Code:
Xlib: extension "GLX" missing on display ":1".
What I'm seeing in my Xorg.0.log is
Code:
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please
[17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[17.511] (EE) NVIDIA(GPU-1): README for additional information.
[17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[17.511]
Backtrace:
[17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b]
[17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8]
[17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c]
[17.511] Segmentation fault at address (nil)
[17.511]
Caught signal 11 (Segmentation fault). Server aborting
[17.511]
I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
View 5 Replies
View Related
Aug 3, 2011
I have just bought an Edimax EW-7711UTn wireless adaptor with CD. I have the Linux folder on the CD. Folder name 2009_0525_RT3070_Linux_STA_v2.1.1.0. How do I install from this folder
View 5 Replies
View Related
Oct 12, 2009
When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.
View 8 Replies
View Related
Sep 25, 2010
I have a:
# lspci | grep Ether
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Looks like the r8169 module that gets loaded is not a valid choice for this chipset. The main error that I see is:
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
I have verified the cable and it's good the windows machine next door is fine using it without packet loss.
The system is a HP Desktop, just CentOS 5.5 loaded on it (base, with no updates).
View 1 Replies
View Related
Apr 3, 2010
Something went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies
View Related
Aug 23, 2011
I have a Nvidia 275GTX and I installed the nvidia drivers via RPM fusion and blacklisted Nouveau as instructed by a guide online that I see matches the one on these forums. When my system boots up now instead of having the cool blue screen with the fedora logo in the middle that loads up I get a black screen with a bar at the bottom that says Fedora 15 to the right and the bar fills up blue and white. It looks like 8 bit Nintendo. Did I do something wrong? Is there a way to get the nice Fedora 15 load screen back?
View 4 Replies
View Related
