I test the HAUWEI E1552 with SMSTOOLS3and i try to command and testing as following
# lsusb
Bus 003 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 003 Device 001: ID 0000:0000
[code]....
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I use Hauwei E220 modem to connect to the internet but for some reason it doesn't want to connect anymore. It works perfectly in XP, it picks just about every wireless network in my area (which I have no access to), it works beautifully if I plug it in before switching on my PC. If, however, I plug it in when the PC is on then nothing
Strangely, it used to work fine then somehow forgot what its supposed to do...
I just got Clear mobile Wimax. It uses a Motorola USB stick modem that comes with a Windows driver. I didn't see a Linux driver and was wondering if I could expect to see one for openSuse moblin for netbooks?
View 4 Replies View RelatedI have a lenovo desktop pc (WIN7) that I connect to the interrnet with. I have a custom built box (SuSE11.3). I have clear internet service and use a USB modem to connect to the internet. Clear does not make a Linux driver yet... I can connect to the Internet through VMware desktop with SuSE as the guest OS. However, I want to connect my other system to a router and my other PC. Would I be able to access the web with the linux box? I have a free NIC card on both pc's, I'm just not savvy enough to network them so if anyone could explain or tell me if it is even posssible to network the 2, My goal is to run SuSE on one, WIN7 on the other and access the internet from both.
View 3 Replies View RelatedTotally lost with this one as I know nothing about PCI modems.
Conexant modem
I have loaded the HSF modem driver from www.linuxant.com
Installed efax and efax-gtk
When I try to send a fax I get;
efax-0.9a: 14:38:38 opened /dev/ttyS0
efax-0.9a: 14:38:44 sync: dropping DTR
efax-0.9a: 14:38:48 sync: sending escapes
[Code]....
send a sms alert which use in nagios. But, when i try to send sms from "sms_client", I got the error message. Here is what was i do
host:/etc/sms # sms_client mynumber "Test"
And here is the error messages :
Dialing SMSC 0855xxxxxx...
WARNING: read() Timeout
WARNING: read() Timeout
ERROR: Timeout: searching for +<CR><LF>+ failed after 10 seconds
ERROR: MODEM: Setting Local echo Failed
Total Elapsed Time: 16 Seconds
[code].....
I use Wavecom Fastrack wm20392 as my GSM Modem with serial cable connectivity.
I've purchased a modem (model ZTE MF100). It work very well on ubuntu. But i want to know, which application that allow to send sms via this modem model?
View 6 Replies View RelatedActually I have USB HSPDA wireless modem and They have given a software to Connect Internet, Send & receive SMS.. But Is there a way to send and receive sms without installing the software .. ??
View 1 Replies View RelatedUbuntu 8.04 workstation
Gnome desktop
What will be the easy way to send/receive fax via modem? Not hylafax, nor efax nor send2fax (the online fax).
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
View 5 Replies View RelatedI have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I have USB modem huawei1550 and it work nice but I have one problem that I cant send or Receive messages because my pc dont recognize my usb as usb modem.
View 2 Replies View RelatedI have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
View 1 Replies View RelatedI need to clear the following error after trying to upgrade with yum. code...
View 1 Replies View RelatedI have Slackware 13+current as of Jan 31, 2010. Except that kernel is 2.6.29.6_smp. I brought yesterday a new Globe Tattoo prepaid kit (a wireless broadband kit -- mobile broadband service here in the Philippines) which uses Huawei E1552 HSDPA USB stick (usb modem).
I understand that they don't natively support linux but from what I've learned, they are the most linux friendly wireless broadband provider. There are few success stories about installing them on Ubuntu, Xandros, Linux Mint and OpenSuSE.
I do searched the net and found: [url]
Which says I need to compile to create a huaweiAktBbo but when run, it says 'dev' failed. (Compile succeed though).
I tried kppp but my Huawei USB stick is detected as USB storage and not as a modem, so i need to use usb_modeswitch.
I grab it from [url] and tried to download the source but it seems that SlackBuilds has not updated yet its link (and the slackbuild package). I tried to make and make install the latest source from [url] but I think I forget that switch-data and conf, anyway I have to re-download again.
Do I need libusb? Or slackware 13 already have it? (I just learn while typing this that I forgot to download the switch-data and the conf file)
Another thing, I found this: [url]
But it says I need the qt compat lib from /extra? Is it this: [url] ?
Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View Relatedi have a huawei e180 mobile internet usb stick in Portugal, that i use to get internet, but as i have switched to Linux , i was wondering if this would work, as before it would install software on the system to run the internet?
View 9 Replies View RelatedI have a Hauwei K3765 Mobile Broadband stick and would like to use it on my Ubuntu 9.10 operating system.I've tried downloading the vodafone-mobile-connect_2.15.01-2_all.deb package, but I recive the following error message:- /tmp/vodafone-mobile-connect_2.15.01-2_all.deb could not be opened, because the associated helper application does not exist. Change the association in your preferences.Does anyone know what this means and how I could install the package?
View 4 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedIm trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
would like to connect my ZTE AC1710 usb modem to my computer. I use an Acer Aspire 5610Z.
View 1 Replies View RelatedHow to reset (clear) statistics for the "netstat -s"?
View 1 Replies View Relatedi have ubuntu 11.04 installed through wubi. ubuntu seems to be able to identify hauwei mobile broadband e1750 but whenever i activate it, it looks like its trying to connect and than after a second, it re-connects if i carefully observe the signal symbol n the upper right corner.
it looks like as if it was blocked off everytime it connected, i have no clue
Using my 3G to the net on centos 5.2 ?
View 1 Replies View RelatedI'm running Centos 5.3 with an analog modem attached to /dev/ttyS0. I'm making an script to run a ppp link, and I need to know if the modem is already in use or not. Where should I look for a lock file and what is the name it's supposed to have?
View 1 Replies View RelatedI have it config'd to send and receive on multiple accounts and they all receive email, but SMTP times out and even sends no matter what account I try to send with. I thought maybe security and dropped the firewall and still won't send. No matter which account I try to send to it says its timing out trying access I have no problems on my Mac so no network problems. For grins I install Thunderbird and setup one account and same thing received but no send. What could it be blocking outgoing email??? I have CentOS 5 with all available updates.
View 3 Replies View Relatedi m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedI installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies View RelatedThis is my first post on forums.i am using centos 5.5 on my pc. i want to use internet on my using my cellphone as modem.internet is running successfuly on my handset.i have got a usb cable to connect it with pc.details are given below:-
1.cellphone= samsung c3200(gprs,edge,3g supporting)
2.connection method= usb cable
3.os= centos 5.5