I'm running Centos 5.3 with an analog modem attached to /dev/ttyS0. I'm making an script to run a ppp link, and I need to know if the modem is already in use or not. Where should I look for a lock file and what is the name it's supposed to have?
View 1 RepliesI have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View Relatedwould like to connect my ZTE AC1710 usb modem to my computer. I use an Acer Aspire 5610Z.
View 1 Replies View RelatedI'm making my own yum repository - firstly so that all the machines I administer can be updatedvia the internal network, secondly so that I can test any updates on a spare machine before passing them on, and thirdly so that I can add my own repo for internal software.
I've created the necessary folders under my webserver, and used rsync to update them from my local CentOS mirror, following the instructions at [URL]
I notice it says to run "createrepo" on the base repository, created by copying the rpms from release DVD.
When I rsynced the updates repo, but I notice that the files in repodata are very small. In fact, having a look inside them, filelists.xml contains no file details. But if I run createrepo in the updates directory, filelists.xml gets lots of file details inside it.
I wondered if maybe the local mirror hadn't been updated properly, but checking against mirror.centos.org shows that has the same files.
how does the (real, live, CentOS) updates repo work when there is nothing in the filelists?
I'm facing problem while making .iso from CD.I used the following commandmkisofs -o cdi.iso clusterwarewhere 'clustereware' is the content i need.Once done, checking this cdi.iso file noticed that certain file names are trimmed/corrupted like from .oui to _ouirunInstaller.sh to runInstalike this many file name changed.
View 5 Replies View RelatedAlright so, I ran everything, and when I go to compile my libssh2 using: phpize && ./configure -with-ssh2 && make
View 1 Replies View Relatedi just installed centos 5.4 and trying to make my local repo have groups listing of packages like the mirrors do
so i can make an spin off of the OS to my needs for web servers only / so on but
i cant get my head around the groups making part of the creatrepo
does anyone have any tips or hints or know how to make group listing of the packages
i copyed the DVD to hard drive and the repo .XML files they came with it and tryed that way but no luck yet
im running out of things to try
I'm trying to make a bootable USB disk by using syslinux. The USB disk is recognized as /dev/sdc.
#mkdosfs -I /dev/sdc
#syslinux /dev/sdc
After executing the above two commands, it generates errors as follow:
end_request: I/O error, dev sdc, sector 32
printk: 21 messages suppressed.
Buffer I/O error on device sdc, logical block 4
Buffer I/O error on device sdc, logical block 5
... ...
Buffer I/O error on device sdc, logical block 12
Buffer I/O error on device sdc, logical block 13
Using my 3G to the net on centos 5.2 ?
View 1 Replies View Relatedi m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedI installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies View RelatedThis is my first post on forums.i am using centos 5.5 on my pc. i want to use internet on my using my cellphone as modem.internet is running successfuly on my handset.i have got a usb cable to connect it with pc.details are given below:-
1.cellphone= samsung c3200(gprs,edge,3g supporting)
2.connection method= usb cable
3.os= centos 5.5
on my server (fax server)with Cento O.S 5.2 final kernel 2.6.18-92.el5 the external serial modem 56k us robotic is not recognized.Kudzu not notes the modem.PS .On the same server ,same modem ,same serial but with Centos 4.5 ,this as regular detect.
View 9 Replies View RelatedWhile communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies View RelatedI'm using Mobidata Usb Modem in other Linux (Ubuntu9.10). its model is: MBD-100EU is it compatible in CentOS5.4. i can't run the "lsusb" because i'm still in the Live CD mood!!! But the Hardware Service detect it as Mobidata modem. "dmesg | grep usb" shows the detection but dont attached any of the /dev also i can't run the "modprobe" command due to Live CD mood!!! Where (in the web) may i find the supported USB list for CentOS5.4 .
View 19 Replies View RelatedI am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
I was trying to install bluez 4.69 for my bluetooth phone modem in my centos 5.5 and it says it needs glib 2.14 or above and then I downloaded glib 2.14 but no luck and tried glib 2.15 but same error.(My internet connection is through phone only so I cant use yum install so Im using another system running on windows and copying it to centos system)
View 1 Replies View Relatedi'm currently having trouble installing my D-Link DU-562M USB Modem in Centos 5.3. That is, my modem is not detected. When i issue the command ls /dev/tty*, i can't see any node pertaining to /dev/ttyUSB0 or more.. what should i do to make my modem work?
View 17 Replies View RelatedI test the HAUWEI E1552 with SMSTOOLS3and i try to command and testing as following
# lsusb
Bus 003 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 003 Device 001: ID 0000:0000
[code]....
Due to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies View RelatedI�m trying to configure Centos-server 5.5 to work with Hylafax software and a modem card that as an Ambient MD3200 chip. Lspci detects the card:
[Code]..
with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View Relatedfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
Just wondering if it is possible to make use of the Windows keys on keyboards - the ones with MS logo.In Vista - the action is to invoke the Start Menu.In Linux, there is no action when you press these keys - can this be changed?
View 10 Replies View RelatedI am trying to install a DB application on my desktop which runs on OpenSuse 11.2 64bit.
Unfortunately the application supports only SUSE Enterprise Linux V10 or V11 or Red Hat Enterprise Linux. Is there a way to add certain packages to 'simulate' an SEL Server? I found some packages name SEL something which I installed, however no changes here, I still can't install the DB.
I have a local mirror at my server. How I can create mirror on DVD's for people without network connections?
View 1 Replies View Related