Actually I have USB HSPDA wireless modem and They have given a software to Connect Internet, Send & receive SMS.. But Is there a way to send and receive sms without installing the software .. ??
View 1 RepliesI've purchased a modem (model ZTE MF100). It work very well on ubuntu. But i want to know, which application that allow to send sms via this modem model?
View 6 Replies View Relatedsend a sms alert which use in nagios. But, when i try to send sms from "sms_client", I got the error message. Here is what was i do
host:/etc/sms # sms_client mynumber "Test"
And here is the error messages :
Dialing SMSC 0855xxxxxx...
WARNING: read() Timeout
WARNING: read() Timeout
ERROR: Timeout: searching for +<CR><LF>+ failed after 10 seconds
ERROR: MODEM: Setting Local echo Failed
Total Elapsed Time: 16 Seconds
[code].....
I use Wavecom Fastrack wm20392 as my GSM Modem with serial cable connectivity.
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
View 5 Replies View RelatedIs there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View RelatedAfter trying to deal with a very frustrating problem in Ubuntu 11.04, which caused my Eee Pc 1001PX to freeze any time I connect it to a wireless network. It worked Perfectly using my ZTE WCDMA Mobile broadband modem though. I gave up - and Formatted my netbook, Downgrading it to Ubuntu 10.10. Now the problem is the exact opposite:
The Wireless works perfectly, But the Modem Is causing the trouble.
Here is the problem:
Whenever I reboot the Computer, It doesn't recognize the modem. If I right click the networks button on the top, go to edit connections, and Delete the mobile broadband connection I had previously configured, then unplug the device (usb) and reconnect it, The computer recognizes it, allowing me to reconfigure the connection (make a new mobile broadband connection). As you can guess, repeating this after every reboot is rather irritating.
Some Technical Details:
My pc: Asus Eee Pc 1001PX
My Mobile Modem: Zte WCDMA Netstick.
When I tried to update my Kernel, the Wireless Problem from Ubuntu 11.04 was back, and I had to reformat.
if i want to send a message to another computer? or get access to another system? what computer knowledges should i know? or what techniques should i learn?
View 2 Replies View RelatedI have just installed ubuntu 7.10 on my computer. The problem is getting it connected to the internet using my Sony Ericsson w580i as a modem. I have used my phone to connect to the internet on XP operating system easily. Please assist me and try to give me a more simplified step by step procedure.
View 9 Replies View RelatedI am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
Sending computer runs linux. Recieving runs OS X.
View 2 Replies View RelatedUbuntu 8.04 workstation
Gnome desktop
What will be the easy way to send/receive fax via modem? Not hylafax, nor efax nor send2fax (the online fax).
I have USB modem huawei1550 and it work nice but I have one problem that I cant send or Receive messages because my pc dont recognize my usb as usb modem.
View 2 Replies View RelatedTotally lost with this one as I know nothing about PCI modems.
Conexant modem
I have loaded the HSF modem driver from www.linuxant.com
Installed efax and efax-gtk
When I try to send a fax I get;
efax-0.9a: 14:38:38 opened /dev/ttyS0
efax-0.9a: 14:38:44 sync: dropping DTR
efax-0.9a: 14:38:48 sync: sending escapes
[Code]....
I test the HAUWEI E1552 with SMSTOOLS3and i try to command and testing as following
# lsusb
Bus 003 Device 003: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 003 Device 001: ID 0000:0000
[code]....
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
I have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
View 1 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com
hi there
[CONTROL-D]
[code]...
I would like to send a pop-up message to a computer using its ip address which is connected online,how it can be done..?
View 9 Replies View RelatedI need to write a command line script.
I have scribus install on my machine which someone suggested would do what I want. It does. But unfortunately I can not get it to work. The text print screen freezes when it is loading a font and will not respond.
One of the other disadvantages with scribus I did find was it wanted to print the fonts in all the size available and at 3 per page I have enough fonts to fill 607 pages.
I have googled, read all the scripting books I have, read several online tutorials and have not found a way to send a request for a certain style font to the printer from the command line.
Is it better to use a Usb to Serial Adapter Cable or a PCI Serial Port Card when attaching a serial port modem to a computer that doesn't provide onboard serial ports?I am leaning toward the USB to Serial Cable but do they work as well as a Serial Port Card? I have a US Robotics business class external serial modem that that I'd like to keep using for dialup internet connections.Here are the devices I am thinking of using:
USB To Serial Cable: KINAMAX CB-RS232 (Prolific Chipset)
PCI Adapter Card: SYBA SD-PCI 15024 --single port chipset=SB16C1052PC1
I've got a Debian Squeeze computer on which the graphics have packed up, but the terminal in single user mode work perfectly fine.
There are a few files on this Debian computer that I want to transfer off, to a networked computer, but I have no idea how to do this.
The destination computer is a freshly re-setup Mandriva install, without (as yet) samba. I don't think it's necessary though. The Mandriva install works fine, has graphics, etc, but can't see the Debian Squeeze computer on the network, possibly because it's in single user mode, thus prompting the problem of how to transfer the files, using only a command line.
Is there an application or script file that I can use to send a message to my cel phone every day at the same time with cron? I have medications I need to take and sometime do not realize I've missed the timing until 4-5 hours later.
View 5 Replies View RelatedI have a high bandwidth linux server and a lower bandwidth windows computer. I want to have the windows computer send my webcam stream to the linux server, then have the linux server redistribute the stream with it's higher available speed to any users connected to it (via http, or whatever will work).
View 3 Replies View RelatedIm trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedMy wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View Related